So, it looks like I am going to start reloading for 50 BMG soon. Loads will be for a bolt rifle (EDM Windrunner). I don't have an established load yet. Will likely be using Hornady bullets, at least to start. I have only seen CCI arsenal primers. Does any other commercial primer manufacturer make primers for it? By the way, I am a fairly experienced reloader, having reloaded for rifle, pistol, and shotgun for many years. Any of you who reload 50 have any advice before I start screwing up expensive components?
-
Having trouble using the site?
Contact support
50 BMG
- Thread starter s4b1106
- Start date
Re: 50 BMG
I have an EDM Windrunner as well. I use cbc brass neck turned with cci primers and 225gr H50BMG powder with Amax Bullets seated .070 off the lands.
I have heard the new Reloader 50 powder is pretty good from the 50bmg benchrest guys. I will try that stuff when I do my next powder order.
I just put an order in from TENX bullets and got my hands on some RWS brass and primers.
I have an EDM Windrunner as well. I use cbc brass neck turned with cci primers and 225gr H50BMG powder with Amax Bullets seated .070 off the lands.
I have heard the new Reloader 50 powder is pretty good from the 50bmg benchrest guys. I will try that stuff when I do my next powder order.
I just put an order in from TENX bullets and got my hands on some RWS brass and primers.
Re: 50 BMG
Keep your eye on www.polygunbag.com. They often have .50 BMG bullets at low prices -- saves money while you are on the learning curve.
Keep your eye on www.polygunbag.com. They often have .50 BMG bullets at low prices -- saves money while you are on the learning curve.
Re: 50 BMG
Tula now makes .50 cal primers, I hope they are as good the large rifle primers! Really good prices too!
Tula now makes .50 cal primers, I hope they are as good the large rifle primers! Really good prices too!
Re: 50 BMG
RWS primers when they can be had have a great brisance. I use wideners and hitech for pulled projo's. I have a real fondness for the pulled sized AP. I personally like 219 range with the Amax. Seems nice and accurate with good bolt lift on my Windrunner.
http://www.snipershide.com/forum/ubbthre...793#Post1162793
RWS primers when they can be had have a great brisance. I use wideners and hitech for pulled projo's. I have a real fondness for the pulled sized AP. I personally like 219 range with the Amax. Seems nice and accurate with good bolt lift on my Windrunner.
http://www.snipershide.com/forum/ubbthre...793#Post1162793
Re: 50 BMG
I like using Lehigh bullets.
http://www.lehighbullets.com/
I haven't tried RWS (the best) or Tula primers yet.
I like using Lehigh bullets.
http://www.lehighbullets.com/
I haven't tried RWS (the best) or Tula primers yet.
Re: 50 BMG
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Iamironman</div><div class="ubbcode-body">I like using Lehigh bullets.
http://www.lehighbullets.com/
I haven't tried RWS (the best) or Tula primers yet. </div></div>
What exactly is your favorite load for the Lehigh bullets?
Bullet?
Brass?
Powder?
Primer?
Rifle and accuracy achieved?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Iamironman</div><div class="ubbcode-body">I like using Lehigh bullets.
http://www.lehighbullets.com/
I haven't tried RWS (the best) or Tula primers yet. </div></div>
What exactly is your favorite load for the Lehigh bullets?
Bullet?
Brass?
Powder?
Primer?
Rifle and accuracy achieved?
Re: 50 BMG
Not sure I have a favorite yet, but this was how I scored at the Williamsport, PA match in June. I have an LAR Grizzly. My load was 228gr of H50BMG. COAL was 6.100. I'm using the 510-170 match bullets. LC brass, and CCI primers. I'm going back next week with a load of 229gr.
Light gun
Score Group
41 21
40 22.75
45 11 7/16 (1x)
41 19 7/8
43 15 1/8 (1x)
39 28 3/8
Hunter
40 9 7/8
41 11 9/16
47 17.25 (1x)
37 32
49 10 13/16 (2x) (new best on one target)
41 19 7/8
Not sure I have a favorite yet, but this was how I scored at the Williamsport, PA match in June. I have an LAR Grizzly. My load was 228gr of H50BMG. COAL was 6.100. I'm using the 510-170 match bullets. LC brass, and CCI primers. I'm going back next week with a load of 229gr.
Light gun
Score Group
41 21
40 22.75
45 11 7/16 (1x)
41 19 7/8
43 15 1/8 (1x)
39 28 3/8
Hunter
40 9 7/8
41 11 9/16
47 17.25 (1x)
37 32
49 10 13/16 (2x) (new best on one target)
41 19 7/8
Re: 50 BMG
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: s4b1106</div><div class="ubbcode-body">Thanks for the info, everyone. On a side note, to those of you with Windrunners, what is the trigger weight on your rifles? </div></div>
Not sure on mine as I have the Kepplinger trigger on mine. It is somewhere between light on regular to "did I even touch the trigger?" on "set" position. Actually think I am going to increase it a little.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: s4b1106</div><div class="ubbcode-body">Thanks for the info, everyone. On a side note, to those of you with Windrunners, what is the trigger weight on your rifles? </div></div>
Not sure on mine as I have the Kepplinger trigger on mine. It is somewhere between light on regular to "did I even touch the trigger?" on "set" position. Actually think I am going to increase it a little.
