I have 1500-2000 pieces of 6.5creedmoor brass fired in a minimum SAAMI print chamber headspaced .002” over Go gauge. In another words it’s about as good as can be for someone else to use. Brass from production chambers can be an issue in match chambers. Match chambers headspaced too tight on the Go or too close to the NoGo can be an issue. This should be as good as it gets for using in another chamber.
It is factory Hornady once fired.
Full length size and trim it.
Price drop to 20 cents each.
Some I already full length sized then realized I don’t have the time to load anymore. Loading the volume I shoot now would be a full time job unless too many corners were cut... and that’s never worth it.
Besides the factory Hornady has a single digit SD and shoots one hole in my last two barrels.
4804678090
Text me please
Thanks
Keith
It is factory Hornady once fired.
Full length size and trim it.
Price drop to 20 cents each.
Some I already full length sized then realized I don’t have the time to load anymore. Loading the volume I shoot now would be a full time job unless too many corners were cut... and that’s never worth it.
Besides the factory Hornady has a single digit SD and shoots one hole in my last two barrels.
4804678090
Text me please
Thanks
Keith
Attachments
Last edited: