6.8 SPC FC head stamp Wierd Primer SIze
- Thread starter stan462
- Start date
Re: 6.8 SPC FC head stamp
Doesn't fit as in the pocket is too small? I have heard this is small rifle brass, perhaps with a crimp? Obviously, if the pocket is larger than a small primer, it must be a large. There are only two options.
Doesn't fit as in the pocket is too small? I have heard this is small rifle brass, perhaps with a crimp? Obviously, if the pocket is larger than a small primer, it must be a large. There are only two options.
Re: 6.8 SPC FC head stamp
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BachelorJack</div><div class="ubbcode-body">Victim of Primer crimp...</div></div>
No, there is no crimp in the primer pocket. I cleaned the brass with the SS tumbler. It is very clean, looks like there is a smaller ring in the pocket hole. I have never experience. I guess I need to call Federal to see what's up.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BachelorJack</div><div class="ubbcode-body">Victim of Primer crimp...</div></div>
No, there is no crimp in the primer pocket. I cleaned the brass with the SS tumbler. It is very clean, looks like there is a smaller ring in the pocket hole. I have never experience. I guess I need to call Federal to see what's up.
Re: 6.8 SPC FC head stamp
.05 sounds like a huge amount, that should be visibly obvious. The standard small primer diameter is .175, are you saying the Federal primers are .125 diameter?
.05 sounds like a huge amount, that should be visibly obvious. The standard small primer diameter is .175, are you saying the Federal primers are .125 diameter?
Re: 6.8 SPC FC head stamp
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: knight_dive</div><div class="ubbcode-body">.05 sounds like a huge amount, that should be visibly obvious. The standard small primer diameter is .175, are you saying the Federal primers are .125 diameter?</div></div>
I am sorry,I error. It is .170 in size. Thanks for catching that.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: knight_dive</div><div class="ubbcode-body">.05 sounds like a huge amount, that should be visibly obvious. The standard small primer diameter is .175, are you saying the Federal primers are .125 diameter?</div></div>
I am sorry,I error. It is .170 in size. Thanks for catching that.
Re: 6.8 SPC FC head stamp
The last batch of 6.8 Silver State brass I bought had this same problem. They were not crimped, the pockets were just too small. You could fix them with a reamer or do what I did and send em back. I use Hornady now.
The last batch of 6.8 Silver State brass I bought had this same problem. They were not crimped, the pockets were just too small. You could fix them with a reamer or do what I did and send em back. I use Hornady now.
