6 Creed Short Action AI Barrel and 1x Fired Brass

[Backspace]

Moving away from 6 Creed, so im selling off my remaining 6 Creed supplies.

1) Bartlein AINA 7.7 twist 24" barrel with 5/8-24 threaded muzzle. 50 rounds fired through it.
$600

2) 276 pcs total of 1x fired Lapua 6.5 Creedmoor small rifle primer brass necked down to 6 Creedmoor.
-211 are fully prepped and ready to prime and load
-55 are fully prepped and primed with CCI 450
-10 fired with no prep
Also included is 43 loaded rounds with H1000 and 115 DTACS left over from load development.
$225



3) 232 pcs total of 1x fired Alpha 6.5 Creedmoor large rifle primer necked down to 6 Creedmoor
-222 fully prepped and primed with CCI 200
-10 fired with no prep
$150

 

[Backspace]

Bump

 

[Backspace]

Bump

 

[Backspace]

Bump

 

[Backspace]

Bump

 

[Backspace]

Prices dropped

 

[Backspace]

Bump

 

[dieselboy427]

How did it shoot for those 50rd? Is the chamber set up for no turn necks? Or factory 6 Creed brass?

 

[Backspace]

Barrel shot great. Did some testing of the necked down alpha vs lapua. Figured there was a lot less capacity with the alpha and lapua than hornady, so i started way low on charge weight with 115 dtacs. Like 38.5 grains of h4350 and a 115. Shot very well for most of the loads with some sub 1/4" grouos but they were slow because i started so low. About 2825 fps. The chamber is a factory chamber. The lapua and alpha do not need to be turned and i have not tried hornady out of it.

 

[Backspace]

Back up for sale. Buyer had some unexpected stuff come up, so everything is still available.