6mm ARC Hornady Brass

[Harronek]

When loading the 6mm ARC to Bolt Action pressures what sort of life span ( how many firings ) can I expect from Hornady Brass ?
Hornady is the only Brass I have available to me .
I should mention I’m not annealing the Brass .
Any first hand experience would be greatly appreciated.

 

[RegionRat]

The question you asked isn't getting much traffic...
Maybe @Ledzep can chime in if their labs have run some typical 6 ARC cases to death?

 

[Ledzep]

Not annealing, probably 5-7 before you get neck splits.

With an annealing schedule (every 3 firings) you can usually get 15-25 depending on how you size the brass. Failure mode then is case head separation.