6mm ARC Hornady Brass

Harronek

Fall in love with the numbers
Minuteman
Feb 9, 2021
79
130
Australia
When loading the 6mm ARC to Bolt Action pressures what sort of life span ( how many firings ) can I expect from Hornady Brass ?
Hornady is the only Brass I have available to me .
I should mention I’m not annealing the Brass .
Any first hand experience would be greatly appreciated.
 
Not annealing, probably 5-7 before you get neck splits.

With an annealing schedule (every 3 firings) you can usually get 15-25 depending on how you size the brass. Failure mode then is case head separation.
 
  • Like
Reactions: RegionRat
You must be at least 18 years of age to use this site
You confirm that you are at least 18 years of age by continuing to use the site.