700 Bolt issue

Mightyman

Mightyman
Full Member
Minuteman
May 14, 2017
48
4
70
suwanee ga
Hope this is the right forum
Got a great like new 1980s LH 270 BDL
Son did reloads for me.
Shot a couple factory bullets to foul the barrell first before trying the reloads
2nd shot must have had bad primer as I got blow back
Now bolt is very hard to close once another round is chambered
And will not eject any ammo?
I use a pushrod to extract round. Tried several different brands
Thoroughly cleaned rifle today and same issue after cleaning

Ideas?Suggestions? What happened and how to fix?
Thanks
 

Attachments

  • A4B0A026-B620-496C-9866-50F83BA0FBB6.png
    A4B0A026-B620-496C-9866-50F83BA0FBB6.png
    1.5 MB · Views: 124
It looks like your primer leaked and now it sounds like your ejector and spring are damaged. What does the bolt face look like?

You say you have to tap the shell casings out with a cleaning rod now? Is the extractor still in the bolt?
 
I think the extracted is gone? Right?
 

Attachments

  • 45A889B8-F53D-48FF-9B99-F9B4A54E7144.jpeg
    45A889B8-F53D-48FF-9B99-F9B4A54E7144.jpeg
    226.3 KB · Views: 157
  • A6DD7A89-F88B-4933-AD84-5C5CB6EB9357.jpeg
    A6DD7A89-F88B-4933-AD84-5C5CB6EB9357.jpeg
    210.6 KB · Views: 164
  • B275B869-D10C-4A5C-83B2-527E522A2D3B.jpeg
    B275B869-D10C-4A5C-83B2-527E522A2D3B.jpeg
    223.5 KB · Views: 156
  • 84EB3C18-2A8B-4B7D-9ED5-5B724A131F92.jpeg
    84EB3C18-2A8B-4B7D-9ED5-5B724A131F92.jpeg
    173 KB · Views: 144
Replace that bolt, gunsmith will know specifically what to do but in those pics, bolt face, ejector, everything looks trashed.
 
I’m not a Smith but prob not that expensive and no big deal. Maybe a few hundred total (just a guess) (bolt plus parts, head spacing, etc).
 
The case on the left has a major ejector swipe. That load was WAY over pressure, do not shoot that load anymore!!! The over pressure load has damaged the ejector and transferred brass onto the bolt face. New ejector and spring plus clean up the bolt face at a minimum.
 
Thanks
Ok it was a factory 270 Remington core lokt load… just foulers and it did this damage
Ok so left hand…. So will take Bolt and gun to smith I guess
Whittens gunsmith just down road
 
Ok thanks
This rifle is a safe Queen…. From the 80s and shoots awesomely

Son just worked up loads with Bergers for me.. and I was about to try them and this happened.
I have 5 other hunting rifles
So not really a time thing but a quality job thing at this point
Thanks again!