so i know i probably need to take it to my smith but every 10 rds or so i have round get stuck and i have to pop loose my bottom metal to get it out. is there a quick fix for this?
7005r feeding issues
- Thread starter jmbd2112
- Start date
Re: 7005r feeding issues
I have the same issue sometimes, Im still working on it but i figured its a bit to do with how you load your rounds into the mag and sometimes they feed wrong. By being absolutely meticulous in the way I put them in ive cut down a fair few problems but also if you feel it starting to jam or get tight take the pressure of the bolt pull it back about 1mm and then push it forward again. but as said before also try different ammo if you still have trouble
I have the same issue sometimes, Im still working on it but i figured its a bit to do with how you load your rounds into the mag and sometimes they feed wrong. By being absolutely meticulous in the way I put them in ive cut down a fair few problems but also if you feel it starting to jam or get tight take the pressure of the bolt pull it back about 1mm and then push it forward again. but as said before also try different ammo if you still have trouble
Re: 7005r feeding issues
yeah i've tried different ammunition seems not to affect the issue. i don't have a dbm yet, it's still the hs stock with floor plate, but hopefully i'm picking up a manners t5a this weekend which has a dbm. so we'll see if that changes anything.
yeah i've tried different ammunition seems not to affect the issue. i don't have a dbm yet, it's still the hs stock with floor plate, but hopefully i'm picking up a manners t5a this weekend which has a dbm. so we'll see if that changes anything.
Re: 7005r feeding issues
make sure its all pushed back at the tail of the mag.if not this will happen at times.
make sure its all pushed back at the tail of the mag.if not this will happen at times.
Re: 7005r feeding issues
It could be a bunch of different things. When you say it gets stuck, do you mean the round pops off the follower and instead of being pushed into the chamber, is pushed into the relief cut for the bolt nose (the area around the chamber entrance)? If so, it could be something as simple as the way you're cycling the bolt. Give me a little more detail...
It could be a bunch of different things. When you say it gets stuck, do you mean the round pops off the follower and instead of being pushed into the chamber, is pushed into the relief cut for the bolt nose (the area around the chamber entrance)? If so, it could be something as simple as the way you're cycling the bolt. Give me a little more detail...
