Accubond Jump?

[leagle2]

Loading for a .300 WSM. 180 gr Accubond
Any recommendation as to what seating depth the accubonds like?
i.e. jammed, just touching, .01 off the lands. I know I'll have to experiment but am just looking for the most likely starting spot. Thanks.

 

[Longshot38]

Re: Accubond Jump?

I found the 200 grain accubonds very jump tolerant. In my 300 wby they didn't seem to care much about seating depth.

 

[bkincaid]

Re: Accubond Jump?

My 300 WSM likes .020" jump the best, both with the 165's and 180's.

 

[leagle2]

Re: Accubond Jump?

Thanks.

 

[bowslngr]

Re: Accubond Jump?

If I recall correctly, Nosler recommends .03" for their accubonds. I asked one of their techs this question last year.

 

[Huckleberry75]

Re: Accubond Jump?

Plus 1 for 0.03" of jump. Mine is in a 300WM. YMMV.

 

[Shireman]

Re: Accubond Jump?

I jump em .03 out of a 7 STW

 

[65nut]

Re: Accubond Jump?

.03 JUMP works very well outta my 260 with 130 grain accubonds.

 

[ehryk]

Re: Accubond Jump?

I experimented with these in my .300 WSM in 150, 165 and 180 grains. I have a Remington 700 PSP stainless and all 3 shot great at mag length (2.800" COAL). I can't remember what the jump was off hand as I am in the Sand Box and have no access to my notes. I was able to get at least MOA with these but changed after experimenting with the 168 TSX. I would recommend checking to see what your max mag length is then experimenting from there.