Accuracy International AT-X

[blbennett1288]

So what is the product SKU number for the AT-X high rail. I don’t see one on either EuroOptoc nor Mile High website. I think many were under the impression that this one was the one we needed and when I called EO to ask this is the one I was told.

Thanks in advance.

View attachment 7814090

Accuracy International AT-X 20 MOA Action Rail AI-29394BL

Accuracy International AT-X 20 MOA Action Rail AI-29394BL For Sale

www.eurooptic.com

 

[Darkside-Six]

Accuracy International AT-X 20 MOA Action Rail AI-29394BL

Accuracy International AT-X 20 MOA Action Rail AI-29394BL For Sale

www.eurooptic.com

That’s not a “high rail”. That’s the regular one that comes with it.

 

[Scott Seigmund]

Accuracy International AT-X 20 MOA Action Rail AI-29394BL

Accuracy International AT-X 20 MOA Action Rail AI-29394BL For Sale

www.eurooptic.com

This is the correct part number (29394BL) for the AT-X high rail. This will align coplanar with the 20MOA rail that installs on the full length forend bridge.

-Scott

 

[Darkside-Six]

This is the correct part number (29394BL) for the AT-X high rail. This will align coplanar with the 20MOA rail that installs on the full length forend bridge.

-Scott

Thank you for clearing that up.

 

[TomekA]

Check this out ...

 

[White Mamba]

Testing out the folder
Expensive option , now I need a full length rail

 

[carlooa]

This is the correct part number (29394BL) for the AT-X high rail. This will align coplanar with the 20MOA rail that installs on the full length forend bridge.

-Scott

Any update on the axsr buttstock and folding hinge?

 

[Darkside-Six]

Any update on the axsr buttstock and folding hinge?

He said summer of 2022. Only way to get one currently is to buy the AXSR chassi and pull it off.

 

[Darkside-Six]

Testing out the folder
Expensive option , now I need a full length rail

That looks sexy. Assuming you pulled it off an AXSR chassis? That’s what I did with mine. Waiting for it to get back from the gunsmith so I can rock n roll.

 

[deersniper]

Where’d you get a hinge ?




Also. I hear there are failures with this at-x trigger also.

Got to be honest AI is starting to sully their reputation

 

[carlooa]

He said summer of 2022. Only way to get one currently is to buy the AXSR chassi and pull it off.

Oh damn. I had preordered the hinge immediately when it was available on EO. So much for folding it into a pelican before the summer.

 

[Darkside-Six]

Oh damn. I had preordered the hinge immediately when it was available on EO. So much for folding it into a pelican before the summer.

No. That’s different. The hinge is to make the sundaes stock be able to fold. That’s supposedly coming out soon. (April o believe). The actual ASXR stock they said later in 2022

 

[Darkside-Six]

Where’d you get a hinge ?




Also. I hear there are failures with this at-x trigger also.

Got to be honest AI is starting to sully their reputation

That’s not the hinge. That’s an AXSR stock. Same thing I did on mine. Pulled off a chassis.

 

[carlooa]

No. That’s different. The hinge is to make the sundaes stock be able to fold. That’s supposedly coming out soon. (April o believe). The actual ASXR stock they said later in 2022

I’m sad they don’t just split the chassis and sell us the buttstocks now.

 

[Darkside-Six]

I’m sad they don’t just split the chassis and sell us the buttstocks now.

As are many but it is what it is.

 

[White Mamba]

Where’d you get a hinge ?




Also. I hear there are failures with this at-x trigger also.

Got to be honest AI is starting to sully their reputation

It's just my Axsr stock I switched out.
Check rest won't lower enough to run 1.125 rings though

 

[Darkside-Six]

It's just my Axsr stock I switched out.
Check rest won't lower enough to run 1.125 rings though

Are you using the high action rail?

 

[White Mamba]

No just the factory

 

[Darkside-Six]

No just the factory

That’s why. You’ll need the high risk if you’re gonna run the full length forend rail anyways.

 

[deersniper]

You don’t *need* it

That’s why. You’ll need the high risk if you’re gonna run the full length forend rail anyways.

 

[Tritiumdials]

You don’t *need* it

Well, that’s what AI is saying about all AT-X related accessories for current owners.

 

[deadly0311]

 

[5RWill]

View attachment 7817269

What grip is that?

Our distributors will be able to order AICS, for Remington 700, at the beginning of March. All are short action and we will start with the longer front end. Delivery will commence in July 2022.
There should be a new thread on AICS shortly.
Tom Irwin
Accuracy International

Tom any specific dates to look out for? Just not wanting to miss the preorder.

 

[sbernier123]

What grip is that?


Tom any specific dates to look out for? Just not wanting to miss the preorder.

Same.

 

[tomirwin]

What grip is that?


Tom any specific dates to look out for? Just not wanting to miss the preorder.

Just sorting out the planning for machining right now. Had to make sure all of the second production AT-X components were nearly complete and then have to program CNC machines for the AICS in Remington 700 as well as the new rear end.
We will be advising our distributors and taking orders next week so you will be able to order after that and delivery is likely to be July 2022 for the first production run of 100.
Tom Irwin
Accuracy International

 

[Darkside-Six]

What grip is that?


Tom any specific dates to look out for? Just not wanting to miss the preorder.

ERGO TDX-0™: TACTICAL DELUXE ZERO ANGLE FLAT TOP SUREGRIP® - ERGO Grips

 

[chullin32]

Still awaiting the arrival of my AT-X, but I was able to get my full length bridge and a barrel spun up. The barrel is a heavy varmit contour and just messing with the pieces, it almost seems like i will not be able to run that barrel with the bridge. Anyone have some insight to the fitting of these two things?

 

[PlinkIt]

Still awaiting the arrival of my AT-X, but I was able to get my full length bridge and a barrel spun up. The barrel is a heavy varmit contour and just messing with the pieces, it almost seems like i will not be able to run that barrel with the bridge. Anyone have some insight to the fitting of these two things?

I think I remember someone saying they tried to fit a straight 1.250" barrel on one...

Might have been @NoLegs24 maybe?

My memory sucks though so maybe I'm wrong

 

[PlinkIt]

Still awaiting the arrival of my AT-X, but I was able to get my full length bridge and a barrel spun up. The barrel is a heavy varmit contour and just messing with the pieces, it almost seems like i will not be able to run that barrel with the bridge. Anyone have some insight to the fitting of these two things?

Chull post below was by Scott at Ai

With the bridge installed a barrel of 1.250" diameter will fit with clearance. That being said, you will find you don't need an 8+ lb barrel to balance the rifle and stay on target through the recoil cycle. The weight system is a much better approach to tuning the rifle.

The AT-X will ship with a 4 groove cut rifle barrel in 6.5 Creedmoor manufactured by AI in Portsmouth, UK.

Barrels supplied in the US are finished at WIN Tactical from contoured blanks supplied by Bartlein. We have been using Bartlein blanks for about 10 years in the U.S. and will continue to do so.

The interior diameter of the forend bridges is 1.300". The bridge will clear a 1.250" diameter barrel. As Jorge has noted, running a no taper 1.250" barrel may not be the best approach and we did not intend to design the rifle to such extremes. The channel weights, when installed, will also clear a 1.250" barrel. The AI barrel is 1.220" at the breach end and .950 at the muzzle. The weight of the finished 6.5 CM barrel at 24" is 5.8 lbs. So, it's very close to the "M24/M40" profile in finished weight.

View attachment 7577452View attachment 7577444

 

[hic28]

Still awaiting the arrival of my AT-X, but I was able to get my full length bridge and a barrel spun up. The barrel is a heavy varmit contour and just messing with the pieces, it almost seems like i will not be able to run that barrel with the bridge. Anyone have some insight to the fitting of these two things?

I run heavy varmint and it works, you have to put the bridge on first, then install the barrel and it’s fine

 

[NGCSUGrad09]

Turned the red rocket into sniper grey. And for the heavy barrel crowd, this is a Proof Comp Contour.

 

[BLKWLFK9]

Turned the red rocket into sniper grey. And for the heavy barrel crowd, this is a Proof Comp Contour.

View attachment 7819619

Best looking ATX yet.. well done.

 

[Eddie Z]

Turned the red rocket into sniper grey. And for the heavy barrel crowd, this is a Proof Comp Contour.

View attachment 7819619

Damn that's hot

 

[Lmi3]

I just ordered the ATX FDE, hopefully i will get it in 3 monts
I will be running the ZCO 527, what spuhr mounts would you use for this setup? Is the 1.5 inch high enough?

 

[Darkside-Six]

I just ordered the ATX FDE, hopefully i will get it in 3 monts
I will be running the ZCO 527, what spuhr mounts would you use for this setup? Is the 1.5 inch high enough?

Yeah. 1.5 if you’re running the full length forend rail.

 

[Lmi3]

Yeah. 1.5 if you’re running the full length forend rail.

Thanks for the feedback, no i didn’t ordered it with the full length.
But maybe i will take it after…

 

[JB.IC]

I just ordered the ATX FDE, hopefully i will get it in 3 monts
I will be running the ZCO 527, what spuhr mounts would you use for this setup? Is the 1.5 inch high enough?

3 months??? You better just forget you even ordered it because it’s going to be probably triple that

 

[TylerN]

3 months??? You better just forget you even ordered it because it’s going to be probably triple that

That's what I was thinking... I passed 3 months last week and your at the back of the line. gives you time to get ahold of accessories though.

 

[Lmi3]

Thanks for giving me hope
Ordered it in the UK and will be shipped to France….ok i’ll say 6 months

 

[Lmi3]

So this is the one…

 

[beetroot]

Thanks for giving me hope
Ordered it in the UK and will be shipped to France….ok i’ll say 6 months

Who did you order through?
Sporting Services?

 

[sleeplz]

Turned the red rocket into sniper grey. And for the heavy barrel crowd, this is a Proof Comp Contour.

View attachment 7819619

Did you have to drill into the chassis for the thumb test?

 

[Commander Shepard]

So the AT-X high action rail quest continues. I first got PN 26612 (AT high action rail) before Scott posted his explanation. It is in fact the wrong part. As you can see in the first picture, it is close to lining up but not quite. This doesn’t make a difference with most clip ons, but some (like HISS-XLR) are pretty sensitive to it.

Then I ordered the correct part number, which is 29394. The height seems correct, however this rail doesn’t have the two shiny metal recoil lugs (or whatever they are called).This is confusing because both the original low AT-X rail and the high AT rail have them. So before I start hammering at these to see if they come out, does anyone know what the deal here is? Why the difference?

First pic is 26612, second pic is the original AT-X low rail side by side with the high AT-X rail.

 

[Tritiumdials]

So the AT-X high action rail quest continues. I first got PN 26612 (AT high action rail) before Scott posted his explanation. It is in fact the wrong part. As you can see in the first picture, it is close to lining up but not quite. This doesn’t make a difference with most clip ons, but some (like HISS-XLR) are pretty sensitive to it.

Then I ordered the correct part number, which is 29394. The height seems correct, however this rail doesn’t have the two shiny metal recoil lugs (or whatever they are called).This is confusing because both the original low AT-X rail and the high AT rail have them. So before I start hammering at these to see if they come out, does anyone know what the deal here is? Why the difference?

First pic is 26612, second pic is the original AT-X low rail side by side with the high AT-X rail.

INB4 "We at AI made the executive decision to leave the action rail recoil lugs out to extend the cost savings of the AT-X' $5250 competitive pricing to our customers"

 

[NGCSUGrad09]

Did you have to drill into the chassis for the thumb test?

Yes

 

[JB.IC]

INB4 "We at AI made the executive decision to leave the action rail recoil lugs out to extend the cost savings of the AT-X' $5250 competitive pricing to our customers"

 

[deadly0311]

INB4 "We at AI made the executive decision to leave the action rail recoil lugs out to extend the cost savings of the AT-X' $5250 competitive pricing to our customers"

You really are one whiny bitch

 

[Lmi3]

Who did you order through?
Sporting Services?

sportsman gun center

 

[Tritiumdials]

 

[Criver600]

How much adjustment are y'all getting out of the trigger and keeping it drop safe?

Doesn't seem to be able to be adjusted much without it becoming not drop safe

it can definitely be adjusted very light though

Maintaining proper sear engagement is the key.