Accuracy International AT-X
- Thread starter Peter Laurvick
- Start date
I believe I may be #10 at EO; still no phone call though.
I called MHS Monday and they said they got a few, we’re expecting more but no idea how many more or when they’re coming in. They did say they’re expecting to finish FDE before they start other colors, at least for the pre-orders.
Side question: How closely does AI’s FDE match the vortex Razor HD’s goldish color?
Side question: How closely does AI’s FDE match the vortex Razor HD’s goldish color?
Not even close to matching the same shade but they look fine together too me
Eww, that vortex is a weird shade of poor that would clash with the FDE on the ai
I think I found a hacked cam showing the folks over at AI working?
<iframe src="https://giphy.com/embed/1xkMJIvxeKiDS" width="480" height="480" frameBorder="0" class="giphy-embed" allowFullScreen></iframe><p><a href="">via GIPHY</a></p>
<iframe src="https://giphy.com/embed/1xkMJIvxeKiDS" width="480" height="480" frameBorder="0" class="giphy-embed" allowFullScreen></iframe><p><a href="">via GIPHY</a></p>
You know how the L96 was produced with three guys in a shed? Glad it’s four guys making rifles now.
Last edited:
I was legitimately thinking that same thing. Like how Gucci does a scope how to be to slap on an AI
. It’s getting an ATACR right now but that extra weight for the Razor wouldn’t be a bad thing for a competition only rifle. But it does feel a little “poor” when the scope is less than 1/3 the price of the rifle lol
Umm... I think you give them more credit then deserved... They are way slower then a sloth!
Need help with AT-X purchase. Soon I will be making a pre-order purchase from MHS for an AT-X rifle. In my world the cost for the rifle, new scope, mount, etc will be huge. I’m trying to do my due diligence and avoid a mistake. In this thread there is a mention of minor design changes between the first and second production runs. Since I’m in no rush, is there any reason to wait for the second run? Will my AICS magazines work in this rifle? I want to purchase a new scope and mount worthy of this rifle, recommendations (Up grading from Vortex Gen2 Razor). I currently have two Manners stocks and a J. Allen stock (prefer the J. Allen), will I have trouble with the AT-X chassis? Which AI accessories should I start budgeting for to purchase when available? I live in the middle of nowhere and won’t be able to put my hands on this rifle before purchase. The rifle will be used for its intended use, PRS style shooting, 1200 yards and in. Thanks in advance for any wisdom that members have to share.
Design change? What design change?
I've yet to even think about trying AICS mags on any of my AI's, so Idk if it would work. But, I use both AW and AX mags on mine.
As far as accessories goes for the chassis itself
- Long or Short Forend bridge if planning on using NV. Or for looks...
- Long Forend rail for long bridge if planning on using NV. Or for looks...
- Forend Weights (AI or Sawtooth Rifles)
- Pic rail for bipod (unless you plan on using RRS Dovetail/ Arca mount)
- Folding Hinge *No idea on release date*
- Quick Adjust (ASR/ AXSR) Butt Stock *No idea on release date*
Hopefully all these accessories are available by the time your rifle ships...
I'd call EuroOptic or Mile High to see who has the shorter wait list on the exact color you want.
No one knows exactly which color AINA will ship next. But, you're late to the party, so you're waiting regardless.
Just please, don't listen to Burt aka @deersniper LOL
Blasphemy.
people that don’t run ZCO are compromisers.
also. If someone ordered a fde on 9/2 when will it arrive. Asking for a friend
IDK exactly what the design changes are but it was mentioned earlier in this thread. MHS said it was minor changes at attachment points, whatever that means.Design change? What design change?
I've yet to even think about trying AICS mags on any of my AI's, so Idk if it would work. But, I use both AW and AX mags on mine.
As far as accessories goes for the chassis itself
- Long or Short Forend bridge if planning on using NV. Or for looks...
- Long Forend rail for long bridge if planning on using NV. Or for looks...
- Forend Weights (AI or Sawtooth Rifles)
- Pic rail for bipod (unless you plan on using RRS Dovetail/ Arca mount)
- Folding Hinge *No idea on release date*
- Quick Adjust (ASR/ AXSR) Butt Stock *No idea on release date*
Hopefully all these accessories are available by the time your rifle ships...
I'd call EuroOptic or Mile High to see who has the shorter wait list on the exact color you want.
No one knows exactly which color AINA will ship next. But, you're late to the party, so you're waiting regardless.
Just please, don't listen to Burt aka @deersniper LOL
Hopefully they are steel Flush Cups and not aluminum holes in the chassis?
Tom Irwin mentioned minor internal changes. But that's about it. And that was before the 1st batch (Not Pre-Production) of rifles had shipped.
AICS will *not* work on the AT-X, you need an AX magazine, part # 6677. MHSA has some rare ones in AI colors (Elite Sand, Dark Earth, etc) that are no longer made so if you are going for a classic color, get them there.
The Bridge is the part that goes over the barrel on the chassis (as No Legs mentioned), and isn't needed unless you want to add accessories in front of the optic, or just for looks. There is a short bridge which covers about half the barrel, and a long bridge which covers the full barrel.
The AT-X specific weights can be added for balance (Part # 009-1003), and there is an add-on screw kit so you can even stack the weights; as well as brass weights that go in the hand guard and under the barrel (sorry I don't have part numbers for screws or brass weights)
IMHO, I would just get the rifle, a couple extra magazines, and get a Really Right Stuff ARMS-LR bipod clamp and TBAC Bipod, a case of Berger 6.5 CM rounds, and shoot the snot out of it and figure out what what you feel need from there.
For optic, I'd get the ZCO 527 with the MPCT3 or 3x reticle, and a Spuhr SP-6602 mount, and a Spuhr A-0119 Bubble Level, and never be left wanting more!
Even though people say don’t listen to you LOL, I’m going to take your recommendation and get a ZCO 527. What are a couple of mount recommendations and height. Thanks
Arc rings or spuhr mount or era tec. There’s another one too. Tier one. Maybe another after that.
I run 1.375 or 1.5 for clip on use
you may want to run lower not sure
Like people that railed against trump, that gives you a good indication of who not to listen to
I have always thought the Spuhr mount was the gold standard. But the new ARC M-brace looks interesting.
I would go arc if I wasn’t running a Raptar rail Arc has a great design and track record
I think Spuhr is over rated lol
Here ya go @deersniper
Scroll to the bottom to see the lrf mounts
www.americanrifle.com
Scroll to the bottom to see the lrf mounts
M-BRACE SCOPE MOUNT
www.americanrifle.com
Ya I saw that but that mount looks like one of @Dirty D s girlsHere ya go @deersniper
Scroll to the bottom to see the lrf mounts
M-BRACE SCOPE MOUNT
Tha fuck you mention me in this thread for? I’m so broke when I tried to go to the AI website I got an error 404 message to go be poor somewhere else.
Ted better hope Mercedes doesn't go after himHere ya go @deersniper
Scroll to the bottom to see the lrf mounts
M-BRACE SCOPE MOUNT
If anyone needs them, we have the AX mags in stock as well right now (until the AT-X's start rolling I would guess):
www.bisontactical.com
AIAX Magazine - Bison Tactical - Compact 10 round AIAW magazine
Click here to buy the AIAX Magazine a 10 round metal compact magazine made by Accuracy International for the AI AX rifles.
www.bisontactical.com
sorry but that is ugly as shit and who the hell shoots 1/8 moa with their scope
Howdy: I was looking for a bag rider to attach to the Lower mount on my AT-X butt stock.I found this bag rider from Longshot Precision , (adjustablebagrider.com).Has adjustability function of Lower or higher which could be used in load development. For PRS use I just keep it closed. Hi quality but expensive.
Attachments
nope and I dont care
I've got all the respect in the world for Dave....but that doesn't stop that gun being ugly as sin!
If you're in this thread you might should.
History - Accuracy International USA
www.accuracyinternational.us
Nice looking bag rider. I checked their website and they have several different models for AI rifles not of which are specific to the new AT-X. Do you know which model you ordered?
So this is why our rifles are late--one of four AI gunsmiths was making a green left handed version.
Last edited:
Universal mounted ABR.. it has the pic rail attachment an is not to long.I believe it is the short ELR model. I would call and check first.
Last edited:
