Accuracy International AT-X

[beetroot]

View attachment 7714753
View attachment 7714754View attachment 7714753View attachment 7714754

Somewhat of a thread drift but your tripod placement has spurred a thought regarding the AX/ASR chassis.

Does anyone know what the purpose of the lump in from of the mag well is for on the AX series of rifles?
It made sense as a hand hold on the original AX rifle but seems to be an odd 'feature' to still have, unless there is an purpose for it I'm not seeing.

Seems to me like the ATX would be far nicer to shoot of a tripod than the AX/AXSR due to the considerably lower centre of gravity.

 

[Fred @ Bison Tactical]

Somewhat of a thread drift but your tripod placement has spurred a thought regarding the AX/ASR chassis.

Does anyone know what the purpose of the lump in from of the mag well is for on the AX series of rifles?
It made sense as a hand hold on the original AX rifle but seems to be an odd 'feature' to still have, unless there is an purpose for it I'm not seeing.

Seems to me like the ATX would be far nicer to shoot of a tripod than the AX/AXSR due to the considerably lower centre of gravity.

I agree, but I think the ATX barreled receiver also sits lower in the chassis as well, and may be one of the problem in just removing that section forward of the mag well on the AX (I mean if you could mill it off for example).

 

[Fred @ Bison Tactical]

I will say this shoots WAY better from a tripod than the AX SA I had. With a 6mm BR there was more movement in the AX than the ATX shooting .308, it is notably better...

 

[Reload10]

The ax has the bump as that's how the enclosed forend mounts, it's wedged into it with 2 screws from the bottom.

 

[Tritiumdials]

Somewhat of a thread drift but your tripod placement has spurred a thought regarding the AX/ASR chassis.

Does anyone know what the purpose of the lump in from of the mag well is for on the AX series of rifles?
It made sense as a hand hold on the original AX rifle but seems to be an odd 'feature' to still have, unless there is an purpose for it I'm not seeing.

Seems to me like the ATX would be far nicer to shoot of a tripod than the AX/AXSR due to the considerably lower centre of gravity.

It's where you place your support hand when you hip fire the rifle.

 

[ma smith]

Fred, could you comment on the MDT gen 2 vertical grip vs the ERGO grip?

...

 

[beetroot]

The ax has the bump as that's how the enclosed forend mounts, it's wedged into it with 2 screws from the bottom.

Cheers, that makes sense.
Thinking about it all chassis that have an enclosed forend don't have a completely flat underside, like the MDT ESS vs ACC.

 

[Fred @ Bison Tactical]

Fred, could you comment on the MDT gen 2 vertical grip vs the ERGO grip?


View attachment 7714925

I like vertical grips better - even on my AR's, I just find I get a better hand position and control the trigger better with a fatter vertical grip instead of a slanted AR15 style grip (like the Ergo on the ATX). I didn't spend any time trying shooting the Ergo, since all my other chassis have vertical grip though...

 

[gamewarden]

Almost NRL Hunter Heavy legal...
Has a TBAC SR brake on it too.

 

[Defender3]

Almost NRL Hunter Heavy legal...View attachment 7715630

I'm jelly.....from mile high or Euro?

 

[Bravo6niner]

Almost NRL Hunter Heavy legal...View attachment 7715630

Awesome!!!! Carbon barrel and your there!! That is my plan for hunter if I ever get mine.

 

[Reload10]

I'd think from MH. I believe I was #8 at EO and don't have anything yet.

 

[Fred @ Bison Tactical]

anyone know of a keyslot flush cups that don't include extra rail so I can attach a flush cup sling to the handguard?

 

[Defender3]

I'd think from MH. I believe I was #8 at EO and don't have anything yet.

Thanks, I think I'm 10 at EO.

 

[AXMC]

anyone know of a keyslot flush cups that don't include extra rail so I can attach a flush cup sling to the handguard?

Courtesy of our own Sam B !

Accuracy International Anti-Rotation QD Sling Mount for AX Model

The Anti-Rotation QD Sling Mount provides a secure, twist-free attachment point for push-button QD slings and accessories. It is compatible with all factory pre-14’ and post-14’ AX, AX338, AXMC, and AX-AICS forends.

www.anarchyoutdoors.com

 

[Fred @ Bison Tactical]

Is this the one that is for Keyslot on the ATX?
(Countersink Style, AI #25445)

 

[deersniper]

Is there any plans to make 12 round magazines? Since the AX 10 round mags are welded and can’t accept an extension.

Yes this. A 12 would be nice. I wouldn’t totally hate also have a 15 or 20

 

[Defender3]

Yes this. A 12 would be nice. I wouldn’t totally hate also have a 15 or 20

I hear they're right after the .223.

 

[gamewarden]

I'm jelly.....from mile high or Euro?

Mile High

 

[gamewarden]

Awesome!!!! Carbon barrel and your there!! That is my plan for hunter if I ever get mine.

I have a Proof Carbon barrel...but in 6CM. I'll weight it and see where she stands...may have to change an outstanding order to a 6.5CM M27.

 

[deersniper]

I hear they're right after the .223.

I would figure a third party could make them lr modify existing mags ?

 

[gamewarden]

With 24" CF 6 Creedmoor barrel and no brake.

 

[gamewarden]

With 24" CF 6 Creedmoor barrel and no brake.View attachment 7715676

With a CB Brake and TBAC Ultra 7.

 

[AXMC]

Is this the one that is for Keyslot on the ATX?
(Countersink Style, AI #25445)

Yes, you want the post '14 screws

 

[Fred @ Bison Tactical]

With a CB Brake and TBAC Ultra 7.View attachment 7715681

Going to be miragy... I decided Hawkhill marksman contour in all steel to make weight...

 

[gamewarden]

Going to be miragy... I decided Hawkhill marksman contour in all steel to make weight...

The Proof is a 6 Creedmoor that's slated for antelope hunting. Wouldn't qualify for NRL Hunter.
What length did you go with for your Marksman and what weight did it come in at??

 

[Adam B]

I am sorry but NRL hunter class is stupid, if I want to carry a heavier gun who cares. Don’t call it hunter just call it light rifle, which is what it really is.

 

[Fred @ Bison Tactical]

The Proof is a 6 Creedmoor that's slated for antelope hunting. Wouldn't qualify for NRL Hunter.
What length did you go with for your Marksman and what weight did it come in at??

I decided on 24" and it is actually Heavy Palma, but not 100% sure on the weight, haven't received it yet . Its hard to figure out everything in advance in terms of the weight... I double checked after I posted

 

[Huskydriver]

With a CB Brake and TBAC Ultra 7.View attachment 7715681

Went boss on everything then put a lupy on top smh.....

 

[HillBilly n TX]

Has there been any word when the AXSR rear stock will be released for the AT-X? Hopefully they will selling the AT-X with the AXSR stock as a complete package, really don’t need the non folder piece laying around.

 

[gamewarden]

Went boss on everything then put a lupy on top smh.....

ZCO is on AXSR. Leupy is light weight.

 

[Huskydriver]

ZCO is on AXSR. Leupy is light weight.

But does it track or is the reticle canted lol?

 

[deersniper]

Has there been any word when the AXSR rear stock will be released for the AT-X? Hopefully they will selling the AT-X with the AXSR stock as a complete package, really don’t need the non folder piece laying around.

Pretty sure they are just gonna sell ya a hinge to make the current atx stock fold.

 

[deersniper]

ZCO is on AXSR. Leupy is light weight.

Until the ZCO 2-16 comes out right ? Right

 

[nmsheephunter]

Has anyone received an elite sand?

 

[WhiskeyWebber]

no,

 

[DougGlatt]

Yep, mine arrived 2 weeks ago.

 

[ma smith]

Yep, mine arrived 2 weeks ago.

any real world pics of elite sand out yet?

 

[DougGlatt]

Nvm, definitely read that wrong mines FDE

 

[hic28]

Nvm, definitely read that wrong mines FDE

Probably just another one of those drunk assholes

 

[spife7980]

Probably just another one of those drunk assholes

 

[abn31c]

Just got the call....MHS.

 

[JB.IC]

Just got the call....MHS.

Color?

 

[abn31c]

Color?

Dark Earth

 

[excess]

Me too, dark earth.

 

[gamewarden]

First group with AT-X after zeroing with 24" Proof CF 6 Creedmoor barrel.

Factory 108 Hornady. Rounds 16-20 down the barrel.

 

[6point5CM]

Like it so far! Still need to dig out my muzzle brake and throw it on.

Couple observations.

1) I’ll be putting the MDT vertical grip on. Don’t love this one.

2) I’ll need to get higher scope rings. With the cheek rest bottomed out my eye is higher than I’d like. (Edit: my Spuhr model is 4001 so 1.181”)

3) Magazine well is awesome! Super fast.

4) Sawtooth weights were great fit and finish.

5) It just looks plain evil.

 

[Defender3]

Like it so far! Still need to dig out my muzzle brake and throw it on.

Couple observations.

1) I’ll be putting the MDT vertical grip on. Don’t love this one.

2) I’ll need to get higher scope rings. With the cheek rest bottomed out my eye is higher than I’d like.

3) Magazine well is awesome! Super fast.

4) Sawtooth weights were great fit and finish.

5) It just looks plain evil.

Thanks, good info.

 

[Heffo]

Like it so far! Still need to dig out my muzzle brake and throw it on.

Couple observations.

1) I’ll be putting the MDT vertical grip on. Don’t love this one.

2) I’ll need to get higher scope rings. With the cheek rest bottomed out my eye is higher than I’d like.

3) Magazine well is awesome! Super fast.

4) Sawtooth weights were great fit and finish.

5) It just looks plain evil.

Like it so far! Still need to dig out my muzzle brake and throw it on.

Couple observations.

1) I’ll be putting the MDT vertical grip on. Don’t love this one.

2) I’ll need to get higher scope rings. With the cheek rest bottomed out my eye is higher than I’d like.

3) Magazine well is awesome! Super fast.

4) Sawtooth weights were great fit and finish.

5) It just looks plain evil.

What height Spuhr is that mate? I’m probably going to put same scope on mine if ever comes ( colour black & in Australia) Do you plan on putting forend rail on top? Not sure if 1.35” or 1.5” be needed? Cheers

 

[Reload10]

I believe with the NV bridge you'll need to swap out the action rail to a "high" AT and run 1.5" rings.