The latest AX in 308 w/ SF 762K Can. 20" tube, 16" handguard, Schmidt and Bender 3-12 Gen 2 Mildot, Sniper grey Cerakote
That's bad!!
-
Having trouble using the site?
Contact support
Accuracy International Pics
- Thread starter jconnolly2002
- Start date
-
- Tags
- accuracy international pics
That's bad!!
AI AE Mk III 2.0 from Mile High. Upgraded to the 1 in 10" Bartlein.
I have a 1 in 8" Bartlein chambered in 6.5 Creedmoor coming as soon as it comes in at Mile High.
I have a 1 in 8" Bartlein chambered in 6.5 Creedmoor coming as soon as it comes in at Mile High.
Just traded a fellow Hide member in AZ for this AW with a 26" 308 barrel. Planning to pick up the barrel change kit so I can swap to the 22" 6.5CM barrel in my safe. Also thinking about changing skins and will probably run a few different scopes before I settle on which fits best. In the pic it's wearing a NIghtforce F1. This is the first AW I've handled and the action is truly amazing. Quite different than a Surgeon or Templar or slicked-up R700. I like those too but this is simply a different kind of beast altogether.
Last edited:
Quite different than a Surgeon or Templar or slicked-up R700. I like those too but this is simply a different kind of beast altogether.
Jepp,You have to try one AI,then U`r hooked
Jepp,You have to try one AI,then U`r hooked
Hi, no that a silencer made by Brugger&Thomet,Switzerland . It has a 16" barrel inside
Hey guys,
I'm just getting into the distance shooting game. This is my current project. I bought a Remington 700 AAC-SD .308 and mated it to a ACIS 1.5. I went with a AAC flash suppressor, Vortex Viper 4-16x50mm, and a Atlas bipod. I'm going to have the barreled action cherakoted FDE. Also, have plans to flute the barrel, and add a monopod. The thumb wheel screws and sling by AC are in the mail, and should be here tomorrow. I haven't shot it yet, but hopefully it'll be a nice shooter!
Uploaded with ImageShack.com
I'm just getting into the distance shooting game. This is my current project. I bought a Remington 700 AAC-SD .308 and mated it to a ACIS 1.5. I went with a AAC flash suppressor, Vortex Viper 4-16x50mm, and a Atlas bipod. I'm going to have the barreled action cherakoted FDE. Also, have plans to flute the barrel, and add a monopod. The thumb wheel screws and sling by AC are in the mail, and should be here tomorrow. I haven't shot it yet, but hopefully it'll be a nice shooter!
Uploaded with ImageShack.comSorry the pic wasn't sharp enough... not that it matters, but mine is a 98
That is beautiful!!!!
one more. He did it and the Spuhr mount RAL8000 to match the S&B 5-25x
This rifle has spoiled me. I picked up some Federal Trophy 165 gr Barnes TTSX to hunt with and have been shocked at how well it shoots in the AX. I'm talking on par or better than FGMM.
This rifle has spoiled me. I picked up some Federal Trophy 165 gr Barnes TTSX to hunt with and have been shocked at how well it shoots in the AX. I'm talking on par or better than FGMM.
Attachments
Last edited:
My AX308. I'm hoping to pick up an AX300 or 338 or the new model next year to keep it company.
Waiting for bambi:
Waiting for bambi:
My new AE MK3 Covert
Also have original 20" factory barrel with break (was converted to a covert by Mile High Shooting)
Also have original 20" factory barrel with break (was converted to a covert by Mile High Shooting)
My AX308. I'm hoping to pick up an AX300 or 338 or the new model next year to keep it company.
Waiting for bambi:
what did that set up run ya out the door?
AE MKIII .260 from Mile High. TBAC 30P-1 keeping her quiet.
Did Mile High thread your barrel?
Thanks! I plan on putting a Specwar 762 on mine and I don't see many AI's with 5/8x24 threads on them.
My girls at 3-1/2 and 1 year anniversaries
Not much to say-- just stock shooters.
If you're going to beat on a stump, might as well use a good hammer!
<a href="http://s1360.photobucket.com/user/whiskeybravoftw/media/aianniversary_zps72c725c4.jpg.html" target="_blank"><img src="http://i1360.photobucket.com/albums/r643/whiskeybravoftw/aianniversary_zps72c725c4.jpg" border="0" alt=" photo aianniversary_zps72c725c4.jpg"/></a>
Not much to say-- just stock shooters.
If you're going to beat on a stump, might as well use a good hammer!
<a href="http://s1360.photobucket.com/user/whiskeybravoftw/media/aianniversary_zps72c725c4.jpg.html" target="_blank"><img src="http://i1360.photobucket.com/albums/r643/whiskeybravoftw/aianniversary_zps72c725c4.jpg" border="0" alt=" photo aianniversary_zps72c725c4.jpg"/></a>
Attachments
R700 AAC SD in 308, AICS 2.0, Viperskin MC, Vortex Razor 5-20x50, Atlas Bipod, AAC 762sdn-6
Stuck the DBAL-I2 laser on the side of it just for ridiculousness. Here's a photo from the range today sighting it in for the first time.. very impressed so far. Also what it looks like in standard AICS skins.
Stuck the DBAL-I2 laser on the side of it just for ridiculousness. Here's a photo from the range today sighting it in for the first time.. very impressed so far. Also what it looks like in standard AICS skins.
Last edited:
The various scope/ring combos that I've used on the AX don't have enough height to clear the forend rail (especially with the bulky Tennebrex caps on the S-B PMII), and I don't have an NV unit so the rail isn't needed.
AI AE Mk3, 308 20". Received it half a year ago. Still very pleased with it.
Really looking forward to the new AI unveil at Shot 2014. Might be a 300wm new-age AI in my future
