Shoot me a PM if you want to know about the GX. Nothing special but it does what I need to in the CO mountains.
-
Having trouble using the site?
Contact support
Shoot me a PM if you want to know about the GX. Nothing special but it does what I need to in the CO mountains.
Hand's down the best looking AI I've laid my eyes on! Nice job Jake!!
(Vid is from a few weeks ago (proper shooting weather imho))
Rang some steel on Sat and im already jittery from the sudden withdrawal...
Disregard the poor sling technique.
Here’s some stills from this weekends rifle league match. Some really good and tricky courses of fire, for the notoriously tall AT rifles. We had a metal tube stage similar to a cattle gate but offset, where I finally did well on. I was never able to score more than a single point, and managed to get 6 hits this time. Finished 9th out of 30 some guys. I’m pretty happy right now. Now someone make fun of my ARCA gamer plate to ruin my mood!
You look familiar, did you put out a few youtube videos reviewing a green AI AT? I think you were doing it in the snow. Was that you?
Well that didn't take very long!
You don't tug on Superman's cape,
You don't spit in the wind,
You don't pull the mask off the ole Lone Ranger,
And you don't pirate AI's Logo.......
Does this mean I'm going to have to cut my arm off?? LMAO
Scott is about to go SAMCRO on you.
You are correct, Sir. I drank the AI koolaid and I love it.
My very first AI
Actually, I just found this thing cleaning out some crap from the basement. It came with the first AWSM I bought in 2003.
Actually, I just found this thing cleaning out some crap from the basement. It came with the first AWSM I bought in 2003.
If this is sfp, pm me when your ready to sell it lolThe pic with the Schmidt is a 4002 1.5 height. The ZP5 below that is with a 4006, 1.35.
View attachment 7310112View attachment 7310127
@Badfinger here is another few shamless pics.
It is. But you are a solid 3rd on the list. Haven't even shot it yet as I bought it and sent it off to get the skins done. Right at 4 months for those. Sent the barrel off to get chopped. And just got everything back and then an optic put on. So total of zero rounds so far on it.
Finally getting a chance to get it out this Sunday. Well see how it does.
I snagged two replacement sheets of 2” high density foam from amazon (prime) for about $40. Price apparently went up but it was a solid choice to replace my garbage foam. It’s all I’ll use now.
Italian made Max1100 - Italian copy of the Peli
MAX1100 Tough IP67 Rated Case
MAX1100 - Trifibre. MAX cases offer superior protection from the elements, water, dust & impacts, making them suitable for a wide array of sectors & applications.
www.trifibre.co.uk
View attachment 7309478
20” 308 AX in Dark Earth (best color lets be honest). Next barrel will be a 6.5CM or 6CM. Can’t decide. You guys sure did cost me some $$. Thank you to the Hide and Mile High Shooting.
What size Sphur mount are you running here???
It’s the Spuhr SP-6002. 0moa in the mount. 308 zeroed at 100 yards I have 21.5 mils of up remaining out of the 35 total mils spec’d.
Is that a 4-20x50 or a 5-27x56? I am trying to find what Sphur mount height will work the best with my AIAX with the top pic rail installed along the handguard for my new 5-2x56
Just topped this off with a new scope... 338NM
All Black, still looking good over these new fancy colors
All Black, still looking good over these new fancy colors
So with the 56mm objective, the lowest I could go would be the 1.5" SP-6004 mount.
Figured that I would add to the collections of great Accuracy International on here. Here are my two Accuracy International. One is an AIAX in 6mm Creedmoor with a Kahles 525i with a SKMR3. The other is a AIAT with a 6.5 Creedmoor with S&B PMII 525 with a MRS. Both rifles have a Surefire break on them and I run a SOCOM RC2 30 cal suppressor with them. Both gun have Spurh rings and send it levels. All were purchased from Mike at Mile High Shooting. I love these damn guns. 
Attachments
In your opinion is there enough room to run Tenebraex covers with the 6002 without hitting the rail?
yeah I should Of said that setup is Bangin' lol..Yea, I think the Bang really ties it all together.
but yea, it really is.
I’ve never had a set of the Tenebraex covers but I measured the clearance from the bottom of the objective bell to the top of the pic rail at 0.270”. Hope that helps.
Not the best pic, but here’s mine. 6.5 Creedmoor with Schmidt and Bender PMII
Got my first AI AT last month. The rifle is amazing, it is going to be my goto rifle whenever I hit the range, just way too much fun to shoot. This is with the 26" 6.5 Creedmoor barrel but also came with a 20" 7.62/308 barrel (haven't shot 308 in a while so this should be fun). Future project will be to have @trophyhunter spin me up a magnum bolt face short action bolt (once I can find a used AI bolt) and @DAVETOOLEY spin me up a 28" 7mm SAUM barrel... why not just buy a long action, maybe an AX MC is in my future but I'm a short action guy and the thought of having a 1.5 mile gun in short action that I can share with Creedmoor and 308 etc. sounds too cool to pass up.
Accessories:
Accessories:
- Anarchy Outdoors Picatinny Spigot - https://www.anarchyoutdoors.com/accuracy-international-spigot-mount/
- Anarchy Outdoors Thumbrest - https://www.anarchyoutdoors.com/accuracy-international-thumb-rest/
- Ckye-Pod from Ckye himself - https://oldballsinc.com/products/copy-of-mdt-ckye-pod-standard-legs
- RRS BAI AT2 dovetail plate - https://www.reallyrightstuff.com/BAI-AT2-Accuracy-International-AT-Chassis
- PVA COMP-40 Tripod - https://patriotvalleyarms.com/comp-40-tripod/
- Ckye Tripod Mocassins - https://oldballsinc.com/collections/old-balls-inc-obi-products/products/moccasins
- Sunwayfoto DYH-90B Leveling Base - https://www.bisontactical.com/shop/sunwayfoto-dyh-90b-leveling-base/
- March 5-42x56 High Master FML-TR1 Reticle - https://www.snipershide.com/shootin...gh-master-fml-tr1-preliminary-review.6993171/
- ARC M10 Low (.94") Rings - https://www.cstactical.com/m10-scope-rings
Last edited:
Yall keep those scary assault AXs out of Canada. Them be banned up der..
I did a big boy thing this week. Bought my first S&B, a PMII. Grid reticle. I’m really digging this setup.
Welcome to the club. I always considered myself a die hard short action guy but now I also have an AXMC in 338 LM to keep the AT company
I’ll play this game, here’s my short action AX that we converted to 300wsm. Tangent Theta H59 sitting in a Spuhr. Barrel is 16” with ThunderBeast 30p1 at the end all resting in a RRS tripod. This is my nilgai hunting rig.
Love the rifle but why would you ruin such a beautiful scope by putting the mosquito net reticle in it
My disdain for Horus reticles aside, you now make me want to get the bolt for the 7 SAUM that much more
Thank you Nik, that's what I'm afraid of, but hoping the SAUM project in the short action AT will keep me busy enough for a while that I won't be tempted by the MC
I have been searching and that was most of what I seen until I read a post on the hide that the early 15 have a LEP as well. I did find the measurements so maybe the seller has calipers to measure just to be sure.
Similar threads
