Accuracy International Picture Thread

[jtackmann]

Been having a "strange issue" with the normal AX mags where 6.5cm of any length would hit the top of the chamber when seating ammo all the way to the back of the mag. With the ASR mags the "issue" no longer happens. The lips on both mags look identical to me but does anyone know why the "issue" may have gone away?

 

[M8541Reaper]

So basically what you're saying is that I'm a heretic committing sacrilege for getting my AXMC cerakoted with a pattern this month?

View attachment 7363134
Been having a "strange issue" with the normal AX mags where 6.5cm of any length would hit the top of the chamber when seating ammo all the way to the back of the mag. With the ASR mags the "issue" no longer happens. The lips on both mags look identical to me but does anyone know why the "issue" may have gone away?

I’m not going to say that these are related, buttttt...
#YouveAngeredThem

(Ok I’ll stop now lol)

 

[Wanderedshot]

Great Literature at its very finest

 

[jwood1284]

View attachment 7360157
axmc 338 above the 1 mile tgt

You may want to invest in an AX50 ELR!

 

[irishshooter]

does anyone know what kinda cheekpiece thumbscrews those are?

does anyone know what kinda cheekpiece thumbscrews those are?

They were factory standard ones. Thats me/my rifle in the pic. It was an AEmk3 with a proof barrel.

 

[Chargerguy]

Those of you with an AXSR that have/had an AXMC, how’re you liking it over the AXMC?

 

[BuLLet]

Loving it so far. Better trigger on the AXSR. Like the rail options on the AXSR over the AXMC. Overall a nice improvement.

Those of you with an AXSR that have/had an AXMC, how’re you liking it over the AXMC?

 

[M289]

Loving it so far. Better trigger on the AXSR. Like the rail options on the AXSR over the AXMC. Overall a nice improvement.

Isn't the AXSR shipped with the AI Competition Trigger (3rd party) instead of the original AI trigger?

 

[Georgedubya]

Isn't the AXSR shipped with the AI Competition Trigger (3rd party) instead of the original AI trigger?

yes. Just got mine and am very excited to shoot it. Trigger is a huge upgrade!

 

[TheBoctor]

After years of dodging it, the guys at Mile High finally got me... Police return MC in .338. Well loved but still shooting good. Excited to get some barrels spun up and try some stuff out.

 

[Georgedubya]

Awesome dude. Thing has some character.

 

[MOUNTIC]

 

[BuLLet]

I do like that Elite Sand!

View attachment 7365201View attachment 7365203

 

[Georgedubya]

+1 for elite sand!!

 

[Bb214]

It’s been a long week getting this all lined out but I picked up my first AI today! I’m in love boys.

 

[BuLLet]

Pale Brown too! A few more and we'll have the rainbow!

 

[Georgedubya]

It’s been a long week getting this all lined out but I picked up my first AI today! I’m in love boys.

Congrats. I got my first one last week and can not wait to shoot her. Caliber?

 

[Bb214]

It’s 6 cm. I actually got it 2nd hand off the px here and it was in 6.5x47 so I ordered a barrel from mile high to have here today when I got back with it.

 

[BLKWLFK9]

Scrolling through my phone, forgot I took this pic

 

[Bb214]

Scrolling through my phone, forgot I took this picView attachment 7365308

David, I’ve been listening to your podcasts as much as I can this week try to get caught up to current episodes. I like it a lot and definitely appreciate the time you take to produce it.

 

[khymiller2]

Does the AXSR's elite look different from cxmc's elite sand?

View attachment 7365201View attachment 7365203

 

[Bb214]

I'm not big on podcasts but I'd like to try one of those. Got a link friend?

I’m not sure if this will work or not but here’s his podbean link.

Just Fn Send It Podcast | david baker

Precision rifle, working dogs that bite, Brazilian Jiu-Jitsu, and current events. TO CONTACT THE PODCAST: [email protected] OR Instagram: @justfnsendit_podcast If you feel so inclined, feel free to donate to th...

davidbakergli.podbean.com

 

[BLKWLFK9]

@reubenski

I would suggest starting at episode 1 and go from there. The podcast will make more sense when u start from the beginning.

 

[Desert Raven]

@reubenski

I would suggest starting at episode 1 and go from there. The podcast will make more sense when u start from the beginning.

I agree. David is awesome and you’ll gain an appreciation for who he is when listening from episode 1. He’s also hilarious and tells a great story. I trust you’ll enjoy it as much as I. It’s a must-listen for me.

 

[samb300]

Scrolling through my phone, forgot I took this picView attachment 7365308

Still haven’t bought a new thumb rest I see...

 

[MysizeisMAGNUM]

Still haven’t bought a new thumb rest I see...

I prefer them looking like they’re cut with a chainsaw my Sam B. Original is perfect.

 

[Echo_18]

How is that thumb rest attachment? You have any issues with the butt stock not staying locked closed when you fold it up?

Scrolling through my phone, forgot I took this picView attachment 7365308

 

[R.Walters]

 

[BLKWLFK9]

How is that thumb rest attachment? You have any issues with the butt stock not staying locked closed when you fold it up?

It doesnt lock closed bc the stud is removed that keeps it locked. With that said, I love it and wouldnt change a thing.

 

[BLKWLFK9]

Still haven’t bought a new thumb rest I see...

I like being throw back.

 

[BLKWLFK9]

I agree. David is awesome and you’ll gain an appreciation for who he is when listening from episode 1. He’s also hilarious and tells a great story. I trust you’ll enjoy it as much as I. It’s a must-listen for me.

Thanks for the kind words, homie.

 

[J-Ham]

Still haven’t bought a new thumb rest I see...

I held up my end of the bargain... Received it in the mail yesterday actually. Also got a box from Mile High containing my AX stock & grip that you & @BLKWLFK9 made me get, haha! I think I have every part I need now for my Burns clone.

 

[Movistar]

View attachment 7366039View attachment 7366040

There’s a lot to unpack her. ASR with a Dominus... but the top pic? WTF? AXMC machined?

 

[J-Ham]

... really ties the room together.

 

[Huskydriver]

That rug though....

#thatrug

Really tied the room together.....


Here is @R.Walters

 

[samb300]

There’s a lot to unpack her. ASR with a Dominus... but the top pic? WTF? AXMC machined?

AXMC-LE, law enforcement only. Not sure if it will be available to the public somehow, but I don’t believe it’s possible to “upgrade” a current AXMC to the LE like you can with the AT-LE, due to needing to de-bond the chassis. They had them on display at shot show, pretty cool but unless you’re LE I’d rather have the AXSR.

 

[M8541Reaper]

Anyone else see this? My bad if it is old news but it is the first I'm seeing it so I figured I'd share.

You in here Alan? If so, can you share any info?

 

[Huskydriver]

Anyone else see this? My bad if it is old news but it is the first I'm seeing it so I figured I'd share.

You in here Alan? If so, can you share any info?

View attachment 7366564

Pretty sweet.

 

[Kwe1982]

Now I want an AX.

 

[samb300]

Anyone else see this? My bad if it is old news but it is the first I'm seeing it so I figured I'd share.

You in here Alan? If so, can you share any info?

View attachment 7366564

I saw that on social media as well. Not sure if it’s the same one, but I saw some pics a couple weeks ago on social media showing a design that was a 2-piece 3D printed set of skins with an AR grip tang. I’d prefer the skins to be aluminum, but they look like they’re working.

There are a few reasons I didn’t pursue this design myself, one of them that I’m lazy haha. But the width of the chassis and skins make it hard to integrate a thumb rest that lines up with an AR grip tang. So I think this design will be perfect for a thumb wrapped around hand position, it’ll be interesting to see how it feels with a thumb on the side hand position. I did notice one of the rifles in the picture above has my thumb shelf on it still!

 

[M8541Reaper]

I saw that on social media as well. Not sure if it’s the same one, but I saw some pics a couple weeks ago on social media showing a design that was a 2-piece 3D printed set of skins with an AR grip tang. I’d prefer the skins to be aluminum, but they look like they’re working.

There are a few reasons I didn’t pursue this design myself, one of them that I’m lazy haha. But the width of the chassis and skins make it hard to integrate a thumb rest that lines up with an AR grip tang. So I think this design will be perfect for a thumb wrapped around hand position, it’ll be interesting to see how it feels with a thumb on the side hand position. I did notice one of the rifles in the picture above has my thumb shelf on it still!

View attachment 7366640

Yea I noticed your rest was still on it, which is awesome because I don’t want to lose that. As far as the company in your image, I don’t think it’s the same as Alan appears to work at GTAC Engineering Services in the UK.

Will be cool to see how it pans out. You’re right though, aluminum skins seem like the most secure/rugged way to go for something like this.

 

[deersniper]

After years of dodging it, the guys at Mile High finally got me... Police return MC in .338. Well loved but still shooting good. Excited to get some barrels spun up and try some stuff out.
View attachment 7365171
View attachment 7365170

How much $$$$$$$$

 

[Bb214]

I got my AI out to zero the other day as well as having my wife take a few glamour shots of the ole stick. The AX definitely does it’s part, now I have zero excuses for missing. I threw together that load real quick and went and zeroed and shot that group. If I didn’t pull the one shot it would be an excellent group

 

[96C]

Yea I noticed your rest was still on it, which is awesome because I don’t want to lose that. As far as the company in your image, I don’t think it’s the same as Alan appears to work at GTAC Engineering Services in the UK.

Will be cool to see how it pans out. You’re right though, aluminum skins seem like the most secure/rugged way to go for something like this.

I'm on the list for one at the moment, they're waiting on stock side skins from AI. It's a machined trigger guard, a couple of screws and a paid or modified stock skins. The kit is 100% reversible so you can go back if it's not what you're after. Attach whatever AR grip.

I'm keen to give it a run and see how it pans out until I can get an AX ASR later in the year / 2021.

 

[Simia Dei]

I'm on the list for one at the moment, they're waiting on stock side skins from AI. It's a machined trigger guard, a couple of screws and a paid or modified stock skins. The kit is 100% reversible so you can go back if it's not what you're after. Attach whatever AR grip.

I'm keen to give it a run and see how it pans out until I can get an AX ASR later in the year / 2021.

Do you have a rough idea when we can order an ASR here?

 

[96C]

Do you have a rough idea when we can order an ASR here?

Best to speak to Delta Tactical, they are running the orders! I'm hoping they will begin arriving at the end of the year or sooner.

 

[MysizeisMAGNUM]

 

[MysizeisMAGNUM]

@samb300 ok I’m ready for my chassis... New RRS setup and RRS bipod attachments. July 4th range session after doing a parade in our small community up in the White Mtns in AZ.

The local chamber of commerce canceled all events due to Covid... So the grassroot Americans in the community said we didn’t need the Chamber to run the 5k, we don’t need them to have a patriotic parade and local business paid for the fireworks show. It wasn’t as fancy as previous years, but it felt a whole hell of a lot better! The entire day oozed FREEDOM for me. Hank my Lab and I finished third in the 5k mostly because the race kickoff was an Anvil shoot (awesome by the way, google that shit) he hated the loud noise and he was one hell of a pace car

The parade was a huge hit, here in AZ if you attempt to take a highway in protest our public safety officers will be spraying you with pepper balls until you’re done. They pulled up to the group we had gathered at our local American Legion, asked our plans and proceeded to close the highway for us to parade a couple miles to our local park. Such an awesome day!

I pretty much just hang in this thread these days and I know you guys well enough that I thought you’d enjoy the story.

I hope you all had a great weekend! I’m just feeling better from one hell of a hangover

Ok ok back to the A.I’s anyone else snap a pic of your A.I on the range this weekend?

Cheers,
Magnum.

 

[Fixr]

Waiting to take a shot in a match on Friday.

 

[Conqueror]

View attachment 7366040

I put a deposit down for a lefty AXSR from Euro Optic after MHSA told me no way would I be able to get an MLOK forend. This thread is making me excited for the gun but this pic is making me sad I can't get MLOK. IMO it looks so much better than Keyslot.