-
Having trouble using the site?
Contact support
I just can't bring myself to do it. It's the nicest TT I've owned out of the three
Yes, Peterson LRP, 185 Jugs, 42.6 gr Varget, 2531 fps, SD 4.1 (45 rounds fired over chrono), but avgs 0.6-0.7 MOA 5 round groups, did a 0.88 MOA 3 round group at 1094 yards.
Next barrel is gonna be black and gold tiger strip for my 22GT lol
How does a guy that deals with NV & thermals run a savage?Yeah and it’s a savage
Your answer is in your reply lol
Too difficult to match parts and keep cerakote consistent in batches.
Yes, this means your rifle just went up 3x in value. Maybe more..
I agree, it's hard to believe these are both ES. 2018 AXMC and 2022 ELR. I hope you are right about the value increase but I'll never sell either one
I agree, it's hard to believe these are both ES. 2018 AXMC and 2022 ELR. I hope you are right about the value increase but I'll never sell either one
View attachment 7991746View attachment 7991747
Very nice rifles! And two completely different colors. I forgot about the ES MCs. Those will probably be the rarest color out all MCs, as they only made them for a short while before the SR came out. Wish I kept one of the ES MCs I had.
Damn that ELR looks more sage green than any form of brown. Maybe they were going for seafoam sand lolI agree, it's hard to believe these are both ES. 2018 AXMC and 2022 ELR. I hope you are right about the value increase but I'll never sell either one
View attachment 7991746View attachment 7991747
Last edited:
MC must have been painted/coated the same place FN does their scarsI agree, it's hard to believe these are both ES. 2018 AXMC and 2022 ELR. I hope you are right about the value increase but I'll never sell either one
View attachment 7991746View attachment 7991747
Beautiful rifles!
I agree, it's hard to believe these are both ES. 2018 AXMC and 2022 ELR. I hope you are right about the value increase but I'll never sell either one
View attachment 7991746View attachment 7991747
Hahah. Sorry internet ain’t great here and the pic didn’t attach the first time
AI and Vortex is the King. Don’t let all these Nightforce and ZCO guys fool you.
Hoping my chassis gets here Monday. Putting my Zeus in one as well.
What all mags work on that chassis?
I have only tried a single stack AI mag, forgot the AW’s at home
Hard to beat the look of the vision chassis forsure lol also hard to get used to the little dicks lining the side of the forend on the ATX
Nope it’s in there. Notice the hole on the right is bigger than the others.
Partner shoot it with just an Area419 adapter?
All kidding aside, congrats. We got 8th on the civilian side. I was running an ATX.
Lol he packed his rifle up already and took it off and forgot to put it back on for photos. I didn’t notice till after and said screw it. Lol
Good job on 8th
Finally got some glass for the HulkCock(tm). Top rail too.
More pics from the guardian match at arena last weekend.
Anyone shed some light on the different models these brakes may have come from? Ive ended up with too many, and Im trying to decide which one to part with.
Not sure what those brakes are off of, but you must have big feet?
The one on the right definitely appears to be much older. The machining tollerances are clearly very different to the newer, tapered, cleanly machined twin port tactical brake on the left.
They are both the AI suppressor ready twin chamber brakes with mirage band thread holes.... The old one might have come off an AWM or something with some nice history?
Personal preference I'd say, depends how much they mean to you.
Some single shot AI Target Actions, machined for a Magwell. AI Coopermatch rifles are dirt cheap in the UK, nobody wants them.
Cerakoted Highland Green, ready for an L96 clone in 6.5CM with barrel threaded for a ASE SL5i.
The Coopermatch actions will wear L96 chassis, skins and barrels.
There are two more. one in left handed which is waiting for the right customer. The other has a factory fitted magwell, for use in a wooden target stock, and is currently being inlet and bedded into a Macmillan McHale stock and barrelled in 6.5CM then cerakoted matt black.
The factory fitted magwell, with magazine held by a spring clip on the front edge. L96 trigger guard, Coopermatch action and McHale stock in the early stages of the build.
Cerakoted Highland Green, ready for an L96 clone in 6.5CM with barrel threaded for a ASE SL5i.
The Coopermatch actions will wear L96 chassis, skins and barrels.
There are two more. one in left handed which is waiting for the right customer. The other has a factory fitted magwell, for use in a wooden target stock, and is currently being inlet and bedded into a Macmillan McHale stock and barrelled in 6.5CM then cerakoted matt black.
The factory fitted magwell, with magazine held by a spring clip on the front edge. L96 trigger guard, Coopermatch action and McHale stock in the early stages of the build.
A couple of L96's at Bisley in the UK last week. One is an ex Police Rifle, the top one is a clone made from a single shot target action.
Lefty, you say...Some single shot AI Target Actions, machined for a Magwell. AI Coopermatch rifles are dirt cheap in the UK, nobody wants them.
Cerakoted Highland Green, ready for an L96 clone in 6.5CM with barrel threaded for a ASE SL5i.
The Coopermatch actions will wear L96 chassis, skins and barrels.
There are two more. one in left handed which is waiting for the right customer. The other has a factory fitted magwell, for use in a wooden target stock, and is currently being inlet and bedded into a Macmillan McHale stock and barrelled in 6.5CM then cerakoted matt black.
The factory fitted magwell, with magazine held by a spring clip on the front edge. L96 trigger guard, Coopermatch action and McHale stock in the early stages of the build.
.....I love you....Some single shot AI Target Actions, machined for a Magwell. AI Coopermatch rifles are dirt cheap in the UK, nobody wants them.
Cerakoted Highland Green, ready for an L96 clone in 6.5CM with barrel threaded for a ASE SL5i.
The Coopermatch actions will wear L96 chassis, skins and barrels.
There are two more. one in left handed which is waiting for the right customer. The other has a factory fitted magwell, for use in a wooden target stock, and is currently being inlet and bedded into a Macmillan McHale stock and barrelled in 6.5CM then cerakoted matt black.
Here is one, stumbled across it while looking for inspiration for RAL8000 Camos.
www.cerakote.com
Cerakote - Custom Camo Rifle Cerakoted Using Desert Sand, Magpul® O.d. Green And Federal Brown
Cerakoted in MAGPUL® O.D. GREEN, FEDERAL BROWN and DESERT SAND. See more of FMJ FIREARMS projects at Cerakote.com along with 1,000’s of other Cerakoting projects.
www.cerakote.com
Wait, isnt this the AI thread? If you can afford an AI with a ZCO you can afford to beat up a $400 paintjob
Similar threads
