Oh wow, that’s badass
DependaBite Arca and Picatinny Universal Vise Jaws
Full length R-Lock dovetail rails for Magpul Pro 700 Chassis.www.sawtoothrifles.com
I use that shit on everything. One of the best tools I have ever bought.
I’ve been waiting for something like this. Thank you.DependaBite Arca and Picatinny Universal Vise Jaws
Full length R-Lock dovetail rails for Magpul Pro 700 Chassis.
I use that shit on everything. One of the best tools I have ever bought.
The AI mugs are too small.
I really need to write a complaint and say they need a bigger coffee mug.
AI will release an updated coffee mug in 2026 with higher capacity. Plus a price increase of $2000.
With a production rate of 3 per month.
No left hand versions tho.
Have you tried the 300 Win Mags? I'm curious about this as well since I'd rather seat heavy 6.5 projectiles out past short action mag length.
Why not just run a 150 rd drum then you never have to do a mag change?
Brah do you even PRS ?
They specifically make 12 round stages to discriminate against AI shooters cause they know they can’t beat us on the up and up
I do and I do a mag change because I'm not a penis tucker.... The fact that 12 round stages have morphed into being no mag change stages is the problem....
If the idea is no mag changes just run a 150 drum the whole match... 12 round mags are gayier than aides....why not 15 why not 30?
Last edited:
Why not a belt fed?
Had this question as well. The 308 mag is what I thought but thanks for confirming it.
I can roll with 5 rounders for a bolt gun in 99% of applications... Blinds were great before we got standardized bottom metal and good mags
..... Single shot is imo a true test of your skills lol
Took the AI out and it's new stable mate the trg22a1. AI in 308 shot my generic m118lr clone load as typical 1/2moa. Not sure what happened when I threw on the suppressor as it typically does the same or better unsuppressed. I can only guess that was about the last set of groups I shot so it likely is shooter skill deficiency.
6x47 needs work. I have a bunch of varget I tried using for it since it worked excellent in my 6.5x47 but I don't think it's going to work. 33.3gr today in 45deg temps and I was getting bad cratering and only hitting 2877fps out of a 26" barrel. Going to try h4350 and h4831sc and see what she does.
Also tested the atlas spigot and have determined I'm not a fan as I was warned. It'd solid when it's tight but the damn thing just keeps loosening up. Going to put the EI back in there and call it a day.
6x47 needs work. I have a bunch of varget I tried using for it since it worked excellent in my 6.5x47 but I don't think it's going to work. 33.3gr today in 45deg temps and I was getting bad cratering and only hitting 2877fps out of a 26" barrel. Going to try h4350 and h4831sc and see what she does.
Also tested the atlas spigot and have determined I'm not a fan as I was warned. It'd solid when it's tight but the damn thing just keeps loosening up. Going to put the EI back in there and call it a day.
Yes, I tried the 12-round 300 WM magazine, way too much forward space, the rounds would just nose dive, and if I pushed them forward, the rounds would jump out.
All my 308 mags have an internal length of 2.973", and I can fit six 6.5 PRC rounds in a mag, and with the MKM mag extensions, I can reliably fit 11 rounds.
I meant for it to be Bradley, don't know nothing about the LAV.
I meant for it to be Bradley, don't know nothing about the LAV.
Brads suck......f that noise
Day 1 of the 2024 PRS UK season i
opener.
Weather was
but when AI goes pew I'm a happy man, even if its missing steel 
Pics like this sometimes make me wish I got a atx as well.
I fought it for a long time with custom builds but have to tell you this ATX has become my favorite for the range.
Last edited:
They’re NF rings with their RAP-i for a diving board. Think I’ll switch back to an ARC M Brace for the MARS lc though. Just wanted the height of the RAP to get over a clip on with the laser. Still testing.
Wow, was that absolutely necessary?
Dude just said F U to about 85% of the guys in here 
* quietly takes off my fde skins for my camo painted....
* quietly takes off my fde skins for my camo painted....
I need to get a vortex 4000 over the ridiculously tall clipIR ELR
After spending time in the AT-XC thread, this is my safe space now... No more elite sand, AW series being offered but not in the US. We are moving in the wrong direction gentleman. This is why I have trust issues.
AI UK still make AW's for the international market. They aren't imported into the US unless you can import it on your own.
I’m in England and have brought rifles over here from the USA privately. It shouldn’t be too difficult to do it in reverse. I’m pretty sure that there are minimum runs for the AW series to be produced.
I passed on an AWM last year and seriously regret it. I’m also having sellers regret moving my AT for an AX308. There is something about the legacy series and the comfort of all that plastic.
Seeing as this is the AI thread it would be rude not to include a gratuitous shot
Attachments
Well I'll be damned. I wonder if we got a kind of group buy going and imported a few of them at a time if it would be more worth while. Wish I knew this before I got my trg
. Would have sprung for an AW folder this route.Edit: having had both the AX308 and now the AT I can understand the regret. The AX in a multical platform like the axmc makes sense but the AT is better than the AX (in my experienced opinion) unless all you do is bench shoot.
Two reasons for this post:
First, the MC is ready to roll for the first ELR match of the year around here next Saturday
Second. I have made some loading/staging shelves for the ZERO press for myself and a couple of buddies. I have 2 sets left. They are bead blasted but no anodize and may have some imperfections.
I want to give back to my Brothers from the AI Mother so I am giving ( that's "free" for you knuckle draggers) the last 2 units to the first 2 public " I will take it" posted with a pic of your AI, as long as A: you have been a member of this forum at least as long as me and B: You actually own an AI. and C: you promise not to put any 6.5CM rounds on the trays
I really appreciate all the knowledge that is passed around on this forum. You are a really good bunch of guys! So lets see how long this takes lol
First, the MC is ready to roll for the first ELR match of the year around here next Saturday
Second. I have made some loading/staging shelves for the ZERO press for myself and a couple of buddies. I have 2 sets left. They are bead blasted but no anodize and may have some imperfections.
I want to give back to my Brothers from the AI Mother so I am giving ( that's "free" for you knuckle draggers) the last 2 units to the first 2 public " I will take it" posted with a pic of your AI, as long as A: you have been a member of this forum at least as long as me and B: You actually own an AI. and C: you promise not to put any 6.5CM rounds on the trays
(just kidding) oh, and you have to live in the CONUS since I am covering shipping also.
I really appreciate all the knowledge that is passed around on this forum. You are a really good bunch of guys! So lets see how long this takes lol
Nice looking ELR rig! What are the specs on your barrel and caliber? Did you fab the forend? Think I may have seen a post awhile back about that?Two reasons for this post:
First, the MC is ready to roll for the first ELR match of the year around here next Saturday
Second. I have made some loading/staging shelves for the ZERO press for myself and a couple of buddies. I have 2 sets left. They are bead blasted but no anodize and may have some imperfections.
I want to give back to my Brothers from the AI Mother so I am giving ( that's "free" for you knuckle draggers) the last 2 units to the first 2 public " I will take it" posted with a pic of your AI, as long as A: you have been a member of this forum at least as long as me and B: You actually own an AI. and C: you promise not to put any 6.5CM rounds on the trays
I really appreciate all the knowledge that is passed around on this forum. You are a really good bunch of guys! So lets see how long this takes lol
View attachment 8352392
View attachment 8352393View attachment 8352394View attachment 8352395
View attachment 8352396
