Accuracy International Picture Thread

What type of scope cover is that? Looks like more than wrap

Thanks / looks great
That’s a Scope Chap

I just put one on my ATACR. Looks good. Have a flag on one side and plan to put a removable drop chart Velcro on the other

 
@hafejd30 beat me to it, but yeah, ScopeChaps. You can ask them to do custom stuff like thread colors and stuff. I have the black multicam with a light blue stitching, and a ZCO patch embroidered on the one side then Velcro on the other for random patches. It's pretty nice and does great protecting the scope
 
Checking zero yesterday before today's match.


20220218_175513.jpg
 
If you ever plan on running a 1.2" straight tube I recommend you bed the action with a barrel installed and even shims on either side of the barrel in between the tip of the fore-end to ensure the barrel is perfectly centered.
Thanks! Sam shared this same info with me along with a few other tips. I appreciate every good bit of advice I’m given👍👍
 
  • Like
Reactions: RS14 and reubenski
Action is in. 8,000 Q-tips and an Xacto knife helped. Used it to trim excess epoxy from a few spots then finished with very light alcohol.

Painstaking work.

The best part is, I get to do it all over again I soon enough 😑👍

Edit to Clarify: This is not difficult. It’s actually pretty enjoyable if you like working with your hands. I just felt the ridiculous need to try and match AI’s perfect bead with the epoxy. Completely unnecessary and an actual personality flaw😆. It’s a great project!


E417F21D-2AE6-48F5-96B8-A5A12CAC3CC8.jpeg
C59F4D0F-F90A-4244-8F8E-AADDE4488A5E.jpeg
E59C53F0-BC7A-494C-A866-3E600618B3EA.jpeg
75E8DFF9-6F45-42E9-8B4E-A8F4C41C9134.jpeg
3A6285C5-F994-4CFF-BA6C-65A7A9C7B4F7.jpeg
 
Last edited:
Action is in. 8,000 Q-tips and an Xacto knife helped. Used it to trim excess epoxy from a few spots then finished with very light alcohol.

Painstaking work.

The best part is, I get to do it all over again I soon enough 😑👍

Edit to Clarify: This is not difficult. It’s actually pretty enjoyable if you like working with your hands. I just felt the ridiculous need to try and match AI’s perfect bead with the epoxy. Completely unnecessary and an actual personality flaw😆. It’s a great project!


View attachment 7814568View attachment 7814569View attachment 7814570View attachment 7814571View attachment 7814567
You missed a spot…
 
  • Like
Reactions: Familydude