Vivacious Stallion
Public Health Authority for the Shadow Gov
Supporter
Full Member
Minuteman
Supporter
-
Having trouble using the site?
Contact support
Make sure you loctite them on. A 6.5 Creedmoor shooter’s liable to swallow a set….
Axmc ready for the NF elr match tomorrow... First round hit at 1960 on the unicorn.
Quite a few ai's today on the line
Quite a few ai's today on the line
I’ll give ya 30 something to put the factory one back on and take that hideous thing off of there!Lol, I'm getting the idea that I have offended the AI knob gods. I do admit aesthetically I don't like it like I thought I would... but I paid 30 something for the knob so feel like I ought to at least give it a chance.
If I book fewer dive trips next year I’m hoping to make it to that one.
Bit of sneaky load dev today with the 6BR. 1:8" 26" with 108gr ELDM & Lapua brass @ 2786fps. It's pretty conservative but shoots well.
Initial load 'development' was 30.0gr of 2208 (varget), kind of, perhaps, maybe about .020" off... Slapped together, 10 shot sub half MOA group.
This really is a horrible rifle...
Initial load 'development' was 30.0gr of 2208 (varget), kind of, perhaps, maybe about .020" off... Slapped together, 10 shot sub half MOA group.
This really is a horrible rifle...
I was out at the Colonel William "Ironman" Lee range at Quantico today to zero the 300PRC. I tried a new optic and a new barrel. The barrel looks like it will be a shooter. The optic was a no-go, had to replace one ATACR with the original. A few sighters and then 12 shots for record. Looks like I dropped the last two shots low, think I did it when I changed the buttstock position. Anyways, new barrel is heading to 1,000yds tomorrow and to get some rounds through it to speed it up. Any day on the range is a great day...
Last edited:
AXMC’s and AXSR’s. Badass man.. I’m still trying to justify jumping on the magnum bandwagon (AXSR). When my range I shoot at furthest steel only up to 1660 yds. Thinking 6.5 cr will do that already. All nice setups though..
NF ELR in WY?We are not in Utah.... And you will also notice every ai is supressed
Come on man, come to the dark side. 1660 is plenty far enough to justify a long action. Sure 6.5 can do it, but you are on the raggedy edge of what that caliber can reach. My range is just 100 yards further at a mile, and I've used it to justify an Axsr with barrels all the way up to 33xc.
I like shooting the long action calibers so much my smaller stuff hardly ever gets shot anymore.
That's a fact. Pick up the one without a barrel and your choice of barrels in the px and for about 8600 you could have a complete 338 LM or whatever.
I've been tempted to pick up that Elite Sand because it truly is the best color. I have an FDE and tell myself it's the better color, but deep down I know it's not.
Just spent a week up at the NRA Whittinton Center in New Mexico with some buddies, great time!
Day 2 ELR match is proving epic... 900 yd visibility... 2 stuck sprinter vans... Couple stuck Chevys... Good thing there were some jeeps here to pull them out....
Yeesh, thought the rain was done yesterday? I was at a mud fest of a match last month, fun in a weird kind of way.
You should buy it….That's a fact. Pick up the one without a barrel and your choice of barrels in the px and for about 8600 you could have a complete 338 LM or whatever.
I've been tempted to pick up that Elite Sand because it truly is the best color. I have an FDE and tell myself it's the better color, but deep down I know it's not.
Took the new barrel to 1,000yds today and estimated the velocity at 2810fps to build a quick drop chart. I was also able to borrow @Fixr AndiScan to try it against the LR. I mounted the LR higher and had better results today than yesterday on Ironman. The AS also worked well considering we just slapped it on the side rail and started shooting. Pics follow as well as the velocity testing results. Any day on the range is a good day on the range.
Proof that AI’s can keep up with the custom guns. My best finish in PRS “type” matches to date. Even better did it with the old and outdated suppressed 6.5CM man-bun. Probably 4-5 points I left on the board from poor wind calls and pulling a shot or two.
Last edited:
Here I was thinking I was the only guy who shoots in sandels and shorts... You sir have class
One of my favorites out at the sandpit today... Canadian smoke was kicking up again, not as bad as Thursday though. Old 308 workhouse and S&B 5x25.
Got a fresh backer board!
Not my best shooting, but any day out is a good day! Trigger is getting a little gritty, probably needs a cleaning.
Got a fresh backer board!
Not my best shooting, but any day out is a good day! Trigger is getting a little gritty, probably needs a cleaning.
My first stage from the PRS UK match this past weekend. After some feedback of how to make the videos a bit more engaging.
I've suffered some financial setbacks this month so I might need to wait a bit longer for that Vision Chassis..
18.5” proof 308, a good setup.
Our new ‘Raider’ rear bag dropped last night.
Like the idea of the QD attachmentView attachment 8165211
18.5” proof 308, a good setup.
Our new ‘Raider’ rear bag dropped last night.
AxSr , thank you Jake . 20" 300wm, Deadair Nomad L , Vortex gen iii.
Sometimes its weird how one can be that lucky within only a few weeks. After jumping on the AW i got offered recently, i now stumbled across this beauty
Cant believe how lucky i am! Only downside is the old stocksides dont fit. Since i am a TRG guy i dont know much absolut the AIs. Found pictures with old sides and a monopod. I can see the different version though. Its almost impossible to get those anymore, however, if someone could point me in the right direction i could try to find some fitting ones and trade mine.
So far its been interesting to compare those to the TRG. Till now i am unsure which one i would pick if i had to choose one only.
AI AWSM 338 Lapua, 250 shots down the barrel, PMII 5-25 P4FL, iron sights, AI bipod.
Cheers
Daniel
Cant believe how lucky i am! Only downside is the old stocksides dont fit. Since i am a TRG guy i dont know much absolut the AIs. Found pictures with old sides and a monopod. I can see the different version though. Its almost impossible to get those anymore, however, if someone could point me in the right direction i could try to find some fitting ones and trade mine.
So far its been interesting to compare those to the TRG. Till now i am unsure which one i would pick if i had to choose one only.
AI AWSM 338 Lapua, 250 shots down the barrel, PMII 5-25 P4FL, iron sights, AI bipod.
Cheers
Daniel
Getting closer to first range trip with this AXMC. Waiting on a TBAC adapter.
RRS plate
Hoptic cheek piece
7-35 ATACR F1 Mil-C
Spuhr 4302
Picked up 3 boxes of Peterson 300NM 215 hybrids to get some brass and some N570.
Goal is to shoot a mile. Scope tracking test showed 100% to 20mils. After boresight looks like I’ll have plenty of adjustment for 2k+
RRS plate
Hoptic cheek piece
7-35 ATACR F1 Mil-C
Spuhr 4302
Picked up 3 boxes of Peterson 300NM 215 hybrids to get some brass and some N570.
Goal is to shoot a mile. Scope tracking test showed 100% to 20mils. After boresight looks like I’ll have plenty of adjustment for 2k+
Welp. Like @DKN83 above I started out with Sako TRG 22's, and still kinda consider myself a TRG man. Hell, you'll have to pry my TRG 22's out of my cold, dead hands! BUT as such things tend to happen....a new .338 AXSR FDE is now headed my way. Thanks to Michael at Euro, he rocks!
Will shortly get a 300 bolt and 300WM barrel. I believe I'll skip the Short Action as my TRGs have those covered.
I'm not a competitive shooter. Truth be told, I barely get to a range at all. I'm also not a reloader; so I'm looking for recommended factory loads to start with.
I've been accumulating Sako TRG ammo for my Sakos, as someone recommended Scenar bullets to me. Any ideas if the TRG ammo would be a good pair with the AXSR in 300WM/338LM too? Ammo is a sizeable investment, I'd like to get at least a decent stab in the dark initially.
Even with great gear, I'll still suck
I'm already taking that for granted. But starting out right while I learn and get better should make it easier.
If this is a discussion better done in another thread, my apologies and point me the way.
Will shortly get a 300 bolt and 300WM barrel. I believe I'll skip the Short Action as my TRGs have those covered.
I'm not a competitive shooter. Truth be told, I barely get to a range at all. I'm also not a reloader; so I'm looking for recommended factory loads to start with.
I've been accumulating Sako TRG ammo for my Sakos, as someone recommended Scenar bullets to me. Any ideas if the TRG ammo would be a good pair with the AXSR in 300WM/338LM too? Ammo is a sizeable investment, I'd like to get at least a decent stab in the dark initially.
Even with great gear, I'll still suck
I'm already taking that for granted. But starting out right while I learn and get better should make it easier.If this is a discussion better done in another thread, my apologies and point me the way.
Last edited:
Your next, cheap order
Accuracy International AT-XC AX AXSR AT | hoptic
The HopticUSA Saddle Blanket for the Accuracy International AIAX, AIMC, AIAT, now AXSR Chassis.AT-X AT-XC *Note this platform is being shipped with two differet size cheek risers. Some have the same riser as the AX and some have a new slim line with smaller wings on the side (See photos) If...
www.hopticusa.com
Is it taken in Canada, just asking because so many TT on the picture
Nice view though, and i bet it aint bad scope either, never had change to eye ball thru one
Nice view though, and i bet it aint bad scope either, never had change to eye ball thru one
NF ELR challenge. That's nolegs ASR wif the truck axle barrel with the AI sticker on it.Is it taken in Canada, just asking because so many TT on the picture
Nice view though, and i bet it aint bad scope either, never had change to eye ball thru one
Not Canada, NF ELr in WyomingIs it taken in Canada, just asking because so many TT on the picture
Nice view though, and i bet it aint bad scope either, never had change to eye ball thru one
Correct, and my MC-LE, both running the Abel co Theorem-L suppressors
You guys shot lights out and those Abel cans sounded pretty good
Similar threads
