Well considering they send guns with bad triggers to major solicitation tests , it could just he incompetence
And god forbid they hire a few more machinist or whatever .
-
Having trouble using the site?
Contact support
And god forbid they hire a few more machinist or whatever .
Key with AI is to buy it soon as you see it available. Waiting around for a few months or a year to buy accessories after you see them available is never a safe bet. LH is limited in quantity so buying bolts before the rifle is a good idea. Same with RH bolts at times.
I wanted an AI, GAP, and Surgeon (old Surgeon) for near 20 years. Unfortunately, I was married to a c*nt at that time who drained my bank account as well as my will to live.
I'm finally at the point where I can relive my 20s as I would have liked...sort of like the old guys who drive Corvettes, but I don't have to wear the jorts and New Balances.
I checked the AI box, and glad I did. However the factory support really opened my eyes. I'm one and done.
Yesterday I got as close to an older Surgeon as I'll find for the price. It's a 2015, 300WM build by Matt Stewart on an older Prague OK action. Matt was one of the guys at Surgeon before the rapid switching of ownership, so it counts (to me). A phone call to Matt (I live by him), and we're going to spin up a few barrels for it so I can switch them here on the ranch. He actually still had the specs on that rifle in his shop. I will probably also swap the stock from the McM A5 to one of Terry Cross' Sentinels (another awesome dude who goes out of his way to help the regular guys).
^ This is why I am glad to give repeat business to certain people/companies.
*****
In keeping up with the purpose of this thread though, I did finalize my 107gr SMK and H4350 load for my 6 CM AT-X barrel yesterday. I beat myself up trying a higher "node", but was stuck in 1/2 - 3/4 MOA-land, so I came back down where I had seen promise before. I just did a quick seating depth test to see where I could load out to and not have to mess with stuff for a while. It held together at 300 yards too, so I'm calling it done.
This barrel really prefers the 108 ELD-M, but I'm sitting on a bunch of the 107 SMKs...so 107s it is.
I'm finally at the point where I can relive my 20s as I would have liked...sort of like the old guys who drive Corvettes, but I don't have to wear the jorts and New Balances.
I checked the AI box, and glad I did. However the factory support really opened my eyes. I'm one and done.
Yesterday I got as close to an older Surgeon as I'll find for the price. It's a 2015, 300WM build by Matt Stewart on an older Prague OK action. Matt was one of the guys at Surgeon before the rapid switching of ownership, so it counts (to me). A phone call to Matt (I live by him), and we're going to spin up a few barrels for it so I can switch them here on the ranch. He actually still had the specs on that rifle in his shop. I will probably also swap the stock from the McM A5 to one of Terry Cross' Sentinels (another awesome dude who goes out of his way to help the regular guys).
^ This is why I am glad to give repeat business to certain people/companies.
*****
In keeping up with the purpose of this thread though, I did finalize my 107gr SMK and H4350 load for my 6 CM AT-X barrel yesterday. I beat myself up trying a higher "node", but was stuck in 1/2 - 3/4 MOA-land, so I came back down where I had seen promise before. I just did a quick seating depth test to see where I could load out to and not have to mess with stuff for a while. It held together at 300 yards too, so I'm calling it done.
This barrel really prefers the 108 ELD-M, but I'm sitting on a bunch of the 107 SMKs...so 107s it is.
Yes...fortunately damaging a bolt body is virtually impossible
It's only a problem if you're left-handed. RH people can get parts pretty readily.They sell spare parts in fully assembled kits now. You just have to upgrade to the new model every few years.
At this point, it would take a lot to convince me that this isn't a conscious decision by those in power at AI. I'm certainly glad I own an AI, as it allows me to come in here and participate in the #1s touching that goes on...but I think out of self-preservation, my next purchase will be something I can more easily source spare parts for.
My book, “The Green Meanie,” seems to indicate that AI’s success thus far was based on selling to professional rifle competitors (not me) and government clients (also not me).
As such, it makes sense that individual sales are not their focus.
-Stan
Last edited:
I don't believe that.
LH AI owners are a SMALL group. They have limited machining capability and that is earmarked for production. What EO told me is that AI would require a 50-bolt order. No dealer will do that for the sake of selling a few and being stuck with the rest. Business is business.
My lesson learned is to make sure you buy all the LH spare parts ahead of buying the rifle or with the rifle. That is what I did with the AXSR.
Ford, HK, and AI get together and just fume about how they hate their customers.
IDK.
Part of the deal is that if you make a specific product, people will expect that you support that product. And rightly so.
As a consumer, you shouldn't be punished because AI doesn't want to support a small portion of their own product line. AI makes LH rifles, and they need to provide support for those products. Of course, that doesn't mean they should have just as many LH parts on their shelves as RH parts. But they should dedicate a % of their support to their LH products. And that shouldn't require making a 50 bolt order.
In my opinion, if you don't want to support your LH customers, then don't make LH rifles.
Have you tried not being left handed?
There is a difference between not offering accessories and not repairing a damaged rifle. I am certain that if either of my rifles had an issue that required a new LH part, it would be repaired.
As I said, it is your money and you either understand and play by the rules or buy something else. When I purchase an AXSR, I'll have everything I need.
Last edited:
Yes. I bought a new SFP 308 bolt body for one of my AXMCs. It was defective (actually skipped an entire step in the machining process). It was the ONLY one in stock ANYWHERE at the time. I had to send it to AINA. They inspected and called me and said, yep - we'll replace it. I asked how long that might take since no one had them in stock anywhere. They said, don't worry - we keep plenty of stock of parts like this on-hand for repairing customer's rifles. It will ship out today.
So, even if you can't find an extra part in stock anywhere, there is an excellent likelihood that AI has it on hand if a rifle needs it for a repair.
Im a Marine. We take that as a challenge
I had no idea that getting parts would be like pulling teeth from an alligator before hand
That’s my thing. I’ve gone down the rabbit hole of trying to get bolt parts and it’s laughable to say the responses I’ve got
Eurooptic has no known ETA if they’ll ever get a bolt assembly in, and that’s a can’t shame cuz I’d buy one to keep with the rifle (1 is none two is few) because im unlucky and have the ability to break shit.
Hopefully they can see that they’ve left a bunch of people scratching their heads. Love the rifle, hate that I can’t find parts (look at the AW mags too right now).
I am left handed. Once I realized no gun company gives AF about lefts I switched to shooting right handed.
You using SRP or LRP for the 6 Creed?
I got a new one here to try out with some factory 108ELdM and also need to get dies so I can work through all the 6.5 brass I have lol
You have an AT. Why do you want a spare bolt assembly? I could see a spare shroud/firing pin assembly.
This time it is SRP. I'm trying out Peterson brass for my first time as well.
Factory 108gr ELD-M loads shot a couple half-minute groups in this barrel. I managed 4-5 groups that were 3/8 or better with the 108s too when I tested charge weights from ~ 38.5 - 40.5 H4350.
This AT-X barrel is a WinTac, 1:7.25 twist, 26". When I ran (just 5 shots) 39.9 and 40.1gr of H4350 over the chronograph the speeds, ES and SD were identical. I had another "flat spot" (I don't really believe in those) between 40.3 and 40.5, but ES and SD were lower...unfortunately the groups opened up a tad.
I went away from the 6 CM due to barrel life...but I think I'm coming back to stay.
Wtf does that have to do with the AI thread?
It’s an AI thread. Go to fudd central to post that junk. Or start a new thread
These what AIs look like :
The LH stuff gets me laughing every time. They don't even make toilet paper for left handed people so fair to assume it be hard to get LH stuff from one of the most boutique rifle makes out there.
I know a LH guy around here that because he shoots AI he's got 2 LH AWs. He's in his 50s so he's been struggling with the illness long enough that when the time to buy a specialized piece of kit , he knew from all those years of suffering.
The LH excuses are invalid.
I know a LH guy around here that because he shoots AI he's got 2 LH AWs. He's in his 50s so he's been struggling with the illness long enough that when the time to buy a specialized piece of kit , he knew from all those years of suffering.
The LH excuses are invalid.
What, no AWM? Must be one of those poors.
I’m glad you asked. I should get a group photo.
AX I never should have e sold on right. Others are mine besides that RPR trash
My favorite AI has a thumbhole stock
You just have a thumbhole stock
So you’re on the right path….
That chassis is great on the left. What is the action? I have a tremendous soft spot for the thumbhole stocks.
Congratulations on your rifle Sir.
However, this is an Accuracy International picture thread...where dudes spend more on a spare bolt than you have invested in that bike...
Kept the ZCO and sold the ATACR.
I had a very different experience from you.
I called AI to ask about replacing a damaged bolt head on a rifle I purchased. They told me they don't swap heads (even though I found a post on here where a rep stated they do), and instead offered to sell me a whole new bolt body for $800 and change (which they had in stock). Not what I wanted to hear, but figured I'd take them up on the offer. When I called back to purchase, the guy I got on the phone acted like I was an idiot and told me they don't sell parts, despite giving me a price for it maybe two days earlier.
Fortunately for me, a kind member here offered to swap his better condition bolt head for mine, so my ugly gas cut bolt has been united with the 7 axis dremel body.
And for anyone curious, swapping bolt heads is like a ten minute process, so I have no idea why they don't do it for people.
Last edited:
Similar threads
