Accuracy International Picture Thread

[samb300]

Aftermarket. Sam B, the same guy responsible for the Accuracy Obsession chassis:conversion is the one who started making them. They’re great!

Pay no attention to the troll

 

[J-Ham]

Aftermarket. Sam B, the same guy responsible for the Accuracy Obsession chassis:conversion is the one who started making them. They’re great!

 

[Krob95]

Obvious troll is obvious

 

[samb300]

Thank you!

Anarchy is always a good choice, especially around any holiday.

 

[Boatninja]

My fuckin salary in just scopes

I was just sitting here thinking about what I would have to sell to get one and decided I'd have to put a Vortex Viper on mine.

 

[Boatninja]

I was just sitting here thinking about what I would have to sell to get one and decided I'd have to put a Vortex Viper on mine.

Looking ar iron sights.

 

[M8541Reaper]

Looking ar iron sights.

If you’re looking for the old school CQB setup, then AR sights will get you there.

 

[eyekahn]

For any AXSR chassis guys lurking in here. I went ahead and got the top rails that AINA said to get. As I suspected the 16" rail is too long. Gonna have it chopped then cerakote them AI Dark Earth.

 

[96C]

Hack saw job bro, 1 minute of fury and a sharpie!

For any AXSR chassis guys lurking in here. I went ahead and got the top rails that AINA said to get. As I suspected the 16" rail is too long. Gonna have it chopped then cerakote them AI Dark Earth.

 

[eyekahn]

Hack saw job bro, 1 minute of fury and a sharpie!

Lol. Gonna take it to my buddies mill most likely. Want it to look semi decent.

 

[BuLLet]

I want one of these!

If you’re looking for the old school CQB setup, then AR sights will get you there.

Wait, I got it covered already

 

[SAS_Sniper]

 

[pfl338]

You know its going to be a good day if the only tough decision is " what caliber to start with?" , even if the weather sucks. lol Shout out to @softcock , his ammo binders are the shit!

 

[thrashergrant]

Beautiful but windy day down here in Texas:

 

[FUNCTIONAL]

Alright guys. Last help question I think.

I can get a hold of a thumbhole kit part no 26722. Says it works on me style skins and I'd cut the little nub to make it work on a folder.

Will this kit work on an AT rifle? I'm thinking yes but want to be 100% on it.

 

[VSP968]

 

[FUNCTIONAL]

View attachment 7771255

So you're sayin there's a chance? Lol

 

[VSP968]

Yup, use a razor saw and cut at the paring line. AT thumb hole molding same same for fixed and folding. Difference is the hinge. Cut on the line as shown.

 

[FUNCTIONAL]

Yup, use a razor saw and cut at the paring line. AT thumb hole molding same same for fixed and folding. Difference is the hinge. Cut on the line as shown.

And no difference between aics and AT rear end kits?

 

[VSP968]

No difference as long as it’s an AT kit.
26722 is a fixed stock thumbhole kit. Cut on the line for a folder.

These are not for sale. Do not PM me about these. They’re gone. This is an old picture. Note line on green fixed butt stock.

 

[FUNCTIONAL]

No difference as long as it’s an AT kit.
26722 is a fixed stock thumbhole kit.

That's what I'm asking if the 26722 is good on an AT. Nothing on the package or descriptions from retailers state if its specific to AT or aics. Just says for new skin type.

 

[SFree]

That's what I'm asking if the 26722 is good on an AT. Nothing on the package or descriptions from retailers state if its specific to AT or aics. Just says for new skin type.

Yes, the 26722 is for both folder and fixed, I have used the same stock sides….

 

[FUNCTIONAL]

Yes, the 26722 is for both folder and fixed, I have used the same stock sides….

That I got. Easy enough to cut the piece off.

Is it meant for an AICS stock or a full blown AT rifle? Is it interchangeable between both? That's the info I can't confirm.

 

[blbennett1288]

That I got. Easy enough to cut the piece off.

Is it meant for an AICS stock or a full blown AT rifle? Is it interchangeable between both? That's the info I can't confirm.

Email [email protected] and ask. That way you’ll have it directly from the horses mouth.

 

[FUNCTIONAL]

Email [email protected] and ask. That way you’ll have it directly from the horses mouth.

Historically I've never had luck talking to manufacturers lol. I emailed them but Euro is my next call.

 

[blbennett1288]

Historically I've never had luck talking to manufacturers lol. I emailed them but Euro is my next call.

AINA is quick. Typically same or next day response.

 

[samb300]

 

[rope]

View attachment 7773121View attachment 7773122View attachment 7773123

What's going on here? I have the shelf sitting in my cart...

EDIT...found the other thread...In for one in PB and a podcast trigger shoe!

 

[RS14]

View attachment 7773121View attachment 7773122View attachment 7773123

When and how much???

 

[samb300]

When and how much???

https://www.snipershide.com/shooting/threads/ai-ax308-grip-mods.6806265/page-6

 

[jbuck88]

Just curious. Is anyone getting extractor marks on their AXSR while reloading? I seem to be getting some extractor marks early in the pressure curve without any other indicators. I had my sfp ax308 have a issue with the ejector that needed send back for is the reason I'm asking. It's a factory 338LM rifle if it matters and I'm seeing marks from the extractor 3-5 grains less then any ejector or primer indicators.

 

[Sleeman]

 

[Tim Brush]

At last, both of my AIs are complete:
- AXMC recently re-cerokoted FMJ firearms @walkabout and with the GTAC grip conversion by @Cheetor and
- AT with some awesome @samb300 accessories

 

[khymiller2]

At last, both of my AIs are complete:
- AXMC recently re-cerokoted FMJ firearms @walkabout and with the GTAC grip conversion by @Cheetor and
- AT with some awesome @samb300 accessories

Is that Elite sand? What is the original color?

 

[Tim Brush]

Is that Elite sand? What is the original color?

Colour matched to AI pale brown - just bad lighting

 

[wichitaguns]

Colour matched to AI pale brown - just bad lighting

Nice. That is kind of like the 2 gun battery I am after. With the difference being an AXMC(saving up now and hoping to buy in june) and an AE MK11.

 

[bfk4lyfe]

Was pumped for my first range trip in about two months. Got 10 rounds off then the fog rolled in…bleh.

 

[EOD100]

This started out as a single shot AI target rifle.
Action was milled for Magwell and safety
Built back up as an L96A1 clone
Cerakoted Highland Green
AI pattern 6x42 green S&B

 

[EOD100]

2017 AT with thumbhole stock
16" .308 barrel
ASE Ultra SL5 Mod
3-15x Steiner

 

[Krob95]

Now that's pretty damn cool!

 

[Krob95]

Question for you folks that have 20" 1:12tw lothar 308 barrels. How do they like FGMM 175's? Half tempted to buy a case and shoot that next month at Raton. I think the furtherest target is 890yds?

 

[hafejd30]

Question for you folks that have 20" 1:12tw lothar 308 barrels. How do they like FGMM 175's? Half tempted to buy a case and shoot that next month at Raton. I think the furtherest target is 890yds?

My 1:12 LW 20” loves 178 ELDX. I would think 175 FGMM would be great as well

 

[Krob95]

Good deal, I may just do that then. Saves me having to work up a load lol

 

[ballisticdaddy]

Nice winter day in Colorado so had to get out and enjoy it with the 6.5x47

 

[Eurodriver]

Did some shooting today. Finally stopped raining.

Really want a thumbhole skin for this. (Any pointers?)

Still waiting on the Sawtooth arca rail to ship, then I just need to get a couple different barrels and a ZCO and then an AX and then an AT-X…

 

[FUNCTIONAL]

Did some shooting today. Finally stopped raining.

Really want a thumbhole skin for this. (Any pointers?)

Still waiting on the Sawtooth arca rail to ship, then I just need to get a couple different barrels and a ZCO and then an AX and then an AT-X…

View attachment 7778832

Sell that mp5 hiding up there and you could just about buy all that in one shot lol

 

[Huskydriver]

pulled the 308 stick out cuz why not....

Digging these new ridge precision tripod leg covers

 

[Darkside-Six]

Sell that mp5 hiding up there and you could just about buy all that in one shot lol

You never ever sell an MP5.

 

[bfk4lyfe]

Did some shooting today. Finally stopped raining.

Really want a thumbhole skin for this. (Any pointers?)

Still waiting on the Sawtooth arca rail to ship, then I just need to get a couple different barrels and a ZCO and then an AX and then an AT-X…

View attachment 7778832

Sporting services in England. About $100 shipped.

 

[Diesel65]