• Get 30% off the first 3 months with code HIDE30

    Offer valid until 9/23! If you have an annual subscription on Sniper's Hide, subscribe below and you'll be refunded the difference.

    Subscribe

  • Having trouble using the site?

    Contact support

Gunsmithing After market adjustable cheek piece by Joe Ducos

#108
Had Joe do his magic on my FN SPR A1a McMillan stock. Could not be happier! Excellent craftsmanship, quick turn around and the price can't be beat!

ImageUploadedByTapatalk1398014894.991218.jpg
 
#109
Seriously, i don't think Joe could have been any quicker and easier to work with. I think it was about a week total turn around time! It seems like he did the loggerhead install the day he received it and had it back in the mail to me the following day! I couldn't be more pleased!!

I have a few loggerheads installed by KMW and i must say the Joes works is every bit as nice and professional and he got it done in a small fraction of the time it took KMW to do my others. I will be using him from now on for all my stock needs! This kinda service just isn't typical in this industry.

I just finished bedding it yesterday and will be hopefully running some loads through this thing next weekend!

Thanks Joe!!!

20140420_101121_zpsokijotug.jpg
 
#112
I got mine back about a week and a half about work prevented me from getting at it. Joe makes this simple and turn around was fast, especially compared to everything else in the industry. Way nicer with the adj cheek piece and now I don't know how i did without. close up picture below (note it is painted to match)

 
#114
I had McMillan open up the barrel channel and inlet for a Badger DBM a month or so ago. While talking with them, they said they couldn't install their cheek rest, so i figured I was SOL.

I sent all my parts for a build to Marc at Spartan Rifles after I got the stock back from McMillan.

After seeing this thread, I contacted Joe to see if he could do his stock work on my McMillan. Joe and Marc are both going out of their way to help me out and get the stock back and forth between them to get the necessary work done.

Both of these gentleman are top notch in my book, and I can't wait to get the finished product back from these two craftsmen.
 
Last edited:
  • Like
Reactions: LH_Gina
#123
Joe did an awesome job installing a KMW Loggerhead on my HS Precision that came with my Savage 10FCP. I would recommend his work to anyone. Fit and finish is great and the filing in of the stock for the unit is first rate.
Thanks stockdoc!! Personally, knowing my skill, I would not attempt to do this job myself. The time and effort to get the proper tools/materials was not worth it to me. Best to send it to someone with experience and a high recommendation from other members here.
 
#133
5 oz or so give or take if you do a clean job of it and don't go overboard with materials. The LRI isn't anywhere near as light as they advertise it to be. He needs to update his web info to reflect the actual total assembly weight with the mounting hardware included.
 
#136
Aeon1 said:
5 oz or so give or take if you do a clean job of it and don't go overboard with materials. The LRI isn't anywhere near as light as they advertise it to be. He needs to update his web info to reflect the actual total assembly weight with the mounting hardware included.
Click to expand...
5 oz or so for the entire weight difference between a non adjustable stock and the finished product from Joe?

eta: just read through the whole thread and it seems that about 5 oz it is. Amazing. Is that still accurate today? I only ask because maybe the process or hardware has changed over the years.
 
Last edited:
#137
Joe’s work totally changed 2 of my rifles and the way they shoot. It’s amazing how much I needed to prop my head up to get a good sight picture before the work
 
#140
Pipipka- what kind of issue are you expecting? Because I doubt that they would fix it for free if it were misuse or an accident. In which case you would need a new stock anyway. I personally have never had a "warranty" issue with any of my mcmillan stocks (over 40 in the course of 30 some odd years).

And if anything happens to my mod I take care of it period. So long as it wasn't in a fire or something :)
 
#147
guns_not_groceries said:
Any ideas how much weight this process adds, roughly? LRI hardware might save some weight over KMW's logger hardware too.
Click to expand...

Aside from the LRI unit being heavier than advertised, it's almost always a wash when doing the conversion to adjustable cheek hardware. It added a full pound to the stock to install the LRI hardware. Maybe a guy could do it a little leaner but imo you might as well have it durable because a couple of ounces in the hardware is nothing vs. the weight of the structural fill to hold it all in the stock.

If weight is a concern, the kydex offerings are probably going to be the best bet.
 
You must log in or register to reply here.

Similar threads

vno.helix
Accessories *SOLD*Manners Pro Hunter with Mini chassis, 700 SA
Replies
1
Views
179
vno.helix
vno.helix
F
Accessories WTS Custom Cheek Spacer for any stock with KMW Loggerhead $30
Replies
29
Views
1K
FMDA171
F
LRI
Gunsmithing EH5 into an EH5A. Cheek Piece stuff...
Replies
8
Views
511
308pirate
308pirate
MisterOrange
SOLD ****SOLD**** McMillan A-3 Adjustable w/ SOL M5 DBM $600
Replies
0
Views
229
MisterOrange
MisterOrange
CR2 Dude
Accessories WTS Brand New Action & Manners Stock w/ Mini-chassis
Replies
7
Views
1K
CR2 Dude
CR2 Dude
Top Bottom
Back
Home
Forums
Merch
Alerts