Who has got the best deal on in stock AI magazines right now? I would prefer a hide vendor.
Edit * SA Rem 700 308 PTG bottom metal
Thanks Ben
Edit * SA Rem 700 308 PTG bottom metal
Thanks Ben
Last edited:
AI mags
- Thread starter pinklbd
- Start date
Good Luck..... they are not easy to find in stock right now. Accurate Mag is your best bet right now.
I always went to Triad for them.
I always went to Triad for them.
10 round of 5 round, can't find any 10 rnders in stock anywhere but I did just get 2 5round mags from tactical works for 70 each
All of the AI mags are listed in this section of the Triad site:
Triad Tactical, Inc.*::*Spare Magazines
As always, the site will tell you if an item is out of stock. If if is, you can fill out a simple form to get notification of when the item is back in stock.
Right now (1200hrs 8/27/2013) the only thing we are out of stock on is the poly 223 mags.
Triad Tactical, Inc.*::*Spare Magazines
As always, the site will tell you if an item is out of stock. If if is, you can fill out a simple form to get notification of when the item is back in stock.
Right now (1200hrs 8/27/2013) the only thing we are out of stock on is the poly 223 mags.
Looks like they are currently out, but might check in with these guys.
Detachable Magazine Archives - Scout Supply Company
Detachable Magazine Archives - Scout Supply Company
Just so you know, those linked mags are from Accurate Magazine Company, not the original Accuracy International ones.
Last edited:
I have ordered from triad, MileHigh, and i_Rep... all with good results. I have also tried alpha mags, which are usually in stock.
Cant figure if you want Bottom Metal or mags
For the 700 SA, this is a great deal Military Overruns. $75
Pacific Tool & Gauge, Inc. - Remington Performance Parts
They sell a set mag and bottom. Last week when I bought they had a stock of AI mags too. I cant find them now.
For the 700 SA, this is a great deal Military Overruns. $75
Pacific Tool & Gauge, Inc. - Remington Performance Parts
They sell a set mag and bottom. Last week when I bought they had a stock of AI mags too. I cant find them now.
Last edited:
Just so you are clear, Triad sells real AI mags. Just placed my order earlier this evening.
I got the real AI mag from Triad. Already had the bottom metal. Was just looking for mags in stock somewhere.
I have had three ten round AICS mags on order since March.
They are hard to get, or at least hard for me to get
That's why I started this thread. Ordered mine from triad and it will be at the door today, and at a reasonable price.
Guys I got my mag in this afternoon and immediately went in the house loaded it up and put it in my bottom metal that I fitted in my stock earlier this week. The first 6 or 7 rounds feed flawlessly, but the last few hang up. It is like they are coming in at too steep of an angle. If I back the bolt off a little and let the bullet come up a little they feed, but going from one round to the next the last few hang. I will try to get a video of what I am talking about.
Is this the way I inletted the bottom metal or the spring in the Mag.
Is this the way I inletted the bottom metal or the spring in the Mag.
Here is a video. This one jammed on round number 7
<a href="http://s105.photobucket.com/albums/m203/cheroking/?action=view¤t=B8523281-C7C5-40C5-88A6-569CB8FF3765-6095-000009170BC0E3D5_zps00de7bc9.mp4" target="_blank"><img src="http://i105.photobucket.com/albums/m203/cheroking/B8523281-C7C5-40C5-88A6-569CB8FF3765-6095-000009170BC0E3D5_zps00de7bc9.mp4" border="0" alt="Photobucket Pictures, Images and Photos" /></a>
<a href="http://s105.photobucket.com/albums/m203/cheroking/?action=view¤t=B8523281-C7C5-40C5-88A6-569CB8FF3765-6095-000009170BC0E3D5_zps00de7bc9.mp4" target="_blank"><img src="http://i105.photobucket.com/albums/m203/cheroking/B8523281-C7C5-40C5-88A6-569CB8FF3765-6095-000009170BC0E3D5_zps00de7bc9.mp4" border="0" alt="Photobucket Pictures, Images and Photos" /></a>
Another link to same video
http://i105.photobucket.com/albums/...8FF3765-6095-000009170BC0E3D5_zps00de7bc9.mp4
http://i105.photobucket.com/albums/...8FF3765-6095-000009170BC0E3D5_zps00de7bc9.mp4
Steve, your stock notification emails were getting sent to my spam box on my Yahoo mail. It was coming from a blind address or something, said was sent from "No Name" address so it wasn't as simple as adding it to my contacts list. I missed out on several stock notices from your site because of this, but happened to catch one of them in the spam box. Just an FYI...
Im no gunsmith, but it might be that the depth you have the floor plate is not deep enough. This means the bolt cant pick up the rounds soon/well enough, and its too "steep" into the chamber.
^^^^^ This
Took a little off my aluminum pillars and the mag fed as it should. Just made me a little nervous when I first loaded it. Just got to stop and think sometimes.
Similar threads
