AIAT Single shot adaptor

[Nodakplowboy]

Planning on shooting a couple of F-TR matches in '19 with my AT. The rules I've read are a little sketchy on the use of magazines, better to be safe than sorry. Any suggestions on converting a AW mag to single shot? The Original Bob Sled is for a AICS mag, doubt that will work for a AW.

Suggestions are most welcome.

 

[M338]

I have used the bob-sled in an Ai chassis with a tempest aw,works perfect.

 

[Supersubes]

You can easily top load single rounds into the magazine through the ejection port. Or simply bevel the rear edge of the follower so it doesn’t act like a bolt stop any more, and single feed as normal.

 

[mercracing]

I've beveled all my AI mags so I can close the bolt while single feeding. It works very well.

 

[OzzyO20]

I've beveled all my AI mags so I can close the bolt while single feeding. It works very well.

Any write up on this? That could come in handy for PRS using a SAP two rounder

 

[Supersubes]

Any write up on this? That could come in handy for PRS using a SAP two rounder

Nothing at all to it. Put a 1/8” bevel on the the bolt stop portion of the follower(rear top edge). Can be done easily with a file once the follower is removed.

 

[Sogan]

My AI AE has single feed just fine without any mods to the magazine

 

[Supersubes]

My AI AE has single feed just fine without any mods to the magazine

That’s because your AE doesn’t use the same magazine as the AT.

 

[Sogan]

That’s because your AE doesn’t use the same magazine at the AT.

Well then...Ill see myself out