Reloading Equipment Alabama Reloading B/S/T

[blbennett1288]

Alabama reloading B/S/T thread.

I am looking for 2000MR and Lapua .308 LRP brass.

I have 400 rounds of Berger 140gr 6.5CM ammo to trade

 

[DamagedGuds]

This thread won't last long...they circumvent the requirement on "for sale" posts. Just change the title to "WTB near AL" or something similar.

 

[blbennett1288]

This thread won't last long...they circumvent the requirement on "for sale" posts. Just change the title to "WTB near AL" or something similar.

You have to have PX rights to post in the PX now...

 

[bucklowery]

I saw new brass At Lafayette shooter supply in Louisiana passing by yesterday. Not sure if they ship or not

Thanks

Buck

 

[DamagedGuds]

You have to have PX rights to post in the PX now...

Okay. I thought that was strictly to creating a post. Misunderstanding on my part. Thanks!

 

[blbennett1288]

I saw new brass At Lafayette shooter supply in Louisiana passing by yesterday. Not sure if they ship or not

Thanks

Buck

Back when I lived in Youngsville, Lafayette Shooters created many problems with their 1 yr no interest financing...man imagine if that was still around.

 

[spmcpeek]

Back when I lived in Youngsville, Lafayette Shooters created many problems with their 1 yr no interest financing...man imagine if that was still around.

It's 24 months now

 

[blbennett1288]

It's 24 months now

Good lord their shelves must be empty

 

[trauma1]

Looking for
40 cal. Pistol projectiles

 

[trauma1]

Looking for
40 cal. Pistol projectiles

 

[BuildingConceptsllc]

Anyone got IMR-4046 ?
Need about 4lbs of it or 8lbs

I have some 68 gr. 22 cal, 75gr 22 cal, and several 30 cal bullets. Also have 8lbs of TAC I would happily trade or buy?

 

[BuildingConceptsllc]

Bump

 

[BuildingConceptsllc]

I have over 20 pounds of 6.5 Staball, and 500-1000 of 175 Sierra SMK's, 175 Nosler RDF's, and 175 Barnes Match Burners that I would trade for IMR 4895, H4350, Varget, or IMR 4166.

Have a few pounds of 4064 I would trade for IMR 4895, H4350, Varget, or IMR 4166.

I thought about varget too but everything is so hard to get. I finally got some accurate 2520 but still haven't gotten any more imr 4064. I've got about 500 175SMK's that I got to make a load with for that one gun but I'm not sure the 4064 is going to get me where I need to be with the brass I'm loading anyway

 

[BuildingConceptsllc]

Have about six pounds left out of an eight pound jug left of 2520 I don’t have any immediate use for right now.

Have some CCI 400’s I could throw in for the right deal on the following powders:

IMR 4895, H4350, Varget, or IMR 4166

I know where I could buy some 4895 but I just bought more accurate and it's only for 223. I've got a 8lb jug of tac

 

[BuildingConceptsllc]

I have to get a crono too

 

[BuildingConceptsllc]

I will meet and bring some stuff. I'd like to get that 308 lapua brass

 

[BuildingConceptsllc]

Definitely would like a few things you have. I've got some stuff that you might be interested in or others might be. I'm down for a swap meet

 

[BuildingConceptsllc]

I don't want to organize it haha but I will show up with as much stuff as I can fit into an F250 if someone schedules it on a weekend at the CMP.

I will put something together, just need a little time. I sent you a pm on something more pressing.

 

[popapi]

WTB 156 EOL Berger's if any of U have some.

 

[Alabama556]

I have 1000 CCI 41 primers I would trade for some hybrid 100 v or 6.5 staball powder. I am in birmingham

 

[BuildingConceptsllc]

Anyone have any other 6.5cm bullets I can try out? Wouldn't need to be a lot. O have some .30 cal bullets I could trade? Also have several powders I'd trade some of to get a bullet sampler going on

 

[kylec]

Anyone have any other 6.5cm bullets I can try out? Wouldn't need to be a lot. O have some .30 cal bullets I could trade? Also have several powders I'd trade some of to get a bullet sampler going on

Whatcha have in mind?

Also, what 30cal bullets for trade?

 

[BuildingConceptsllc]

I have some 175 smk 30 cal and some 168 small for trade


Something other than. 147 eldm Hornady for 6.5cm, preferably a Sierra or a Berger in the 140 ish weight range.

 

[kylec]

I need accubonds in the 150-180 range and/or bergers

 

[rockranger77]

I have some 175 smk 30 cal and some 168 small for trade


Something other than. 147 eldm Hornady for 6.5cm, preferably a Sierra or a Berger in the 140 ish weight range.

looking to sell the 175?

 

[rockranger77]

I have several pounds of Trail boss for sale or trade if anyone is interested? Northeast AL.

 

[BuildingConceptsllc]

looking to sell the 175?

I'd rather trade em???

 

[BuildingConceptsllc]

Anyone have some RL16 or H4350? I have some powder i can trade if ya don't want to sell.

 

[BAMAboy18]

So I used to pick up supplies at the gun shows. I work 12hr nights and for the last 2-3 years every show date was my weekend to work. Now for the last year I've been relegated to working every weekend, damn that's getting OLD! Can reloading supplies still be had at any of the show's? I may just have to sacrifice some sleep to go to one.

 

[BuildingConceptsllc]

So I used to pick up supplies at the gun shows. I work 12hr nights and for the last 2-3 years every show date was my weekend to work. Now for the last year I've been relegated to working every weekend, damn that's getting OLD! Can reloading supplies still be had at any of the show's? I may just have to sacrifice some sleep to go to one.

Yes you can get some stuff there but most stuff is very high. If there individuals selling then that can work though. I got about 250 pcs of once fired 6creed brass for $20 from a guy there I'm hoover. Very little powder there though and the bullets were high. All in all, probably not the best method but you can get lucky.

 

[blbennett1288]

So I used to pick up supplies at the gun shows. I work 12hr nights and for the last 2-3 years every show date was my weekend to work. Now for the last year I've been relegated to working every weekend, damn that's getting OLD! Can reloading supplies still be had at any of the show's? I may just have to sacrifice some sleep to go to one.

I would try your local brick and mortar gun stores that carry reloading components. I have had pretty good luck getting powder and primers over the past year. Bullets, for whatever reason, are still cheaper online.

 

[BuildingConceptsllc]

I should say that they have had primers at the fun shows. They have been expensive, but available.

 

[ryanowarrior]

Anyone have some RL16 or H4350? I have some powder i can trade if ya don't want to sell.

I have some but only trace would be Varget

 

[BuildingConceptsllc]

I have some but only trace would be Varget

Well I don't have variety. I do have some imr that is supposed to be basically the same as varget though. 4166

 

[nightBird]

anyone selling Varget? Florence/Huntsville area?

 

[BAMAboy18]

Seems like most of the stores are trying to get away from carrying reloading supplies. Fletchers in Andalusia had a handful of boxes of bullets (none my calibers) last time I was in there. Dothan is an hour+ drive, last year I looked at Southern Outdoor Sports and didn't see much. My problem, again, stems from working 12hr nights. Makes it hard to get out and run the roads. I suppose I could take a day calling around, or even make a day to go to Montgomery. When it gets down to it, I have plenty to load 308, I just want to add the ability to load 9mm & 7.62x39, a few more single stage presses, and nice digital scale. I know a lot of online retailers are getting stock built back up, but at the "new" higher prices.

 

[blbennett1288]

@BAMAboy18 I was able to source Varget and BR4s from Walter Craig in Montgomery. It’s been a couple months though, so I don’t know what their inventory is like now, but in my opinion would be worth the call.

 

[BuildingConceptsllc]

Anyone want to trade me my cci small rifle primers for your cci large rifle primers?

 

[blbennett1288]

@BuildingConceptsllc I got some BR2’s I’d be will to trade. What SRP do you have?

 

[BuildingConceptsllc]

@BuildingConceptsllc I got some BR2’s I’d be will to trade. What SRP do you have?

I've got 450's and I've got 400's.

 

[BuildingConceptsllc]

@deadly0311. This is the AL reloading thread and most are in central AL. Just so you know

 

[BuildingConceptsllc]

@BuildingConceptsllc I got some BR2’s I’d be will to trade. What SRP do you have?

I have 1k of BR-4s also if you'd prefer that.

 

[blbennett1288]

I have 1k of BR-4s also if you'd prefer that.

I got 2k BR2s I’d trade for 2k BR4s or 450s

 

[BuildingConceptsllc]

I got 2k BR2s I’d trade for 2k BR4s or 450s

Ok, I only have 1000 of the Br4 but I've got 2000 of the 450's

 

[BuildingConceptsllc]

I got 2k BR2s I’d trade for 2k BR4s or 450s

There's a big gun show at the hoover met. I'm going to check it out and see if I can find a few things. My buddy is there selling his guns anyway so...

If you see this really soon, and want to meet me there I could go by and get those primers

 

[blbennett1288]

There's a big gun show at the hoover met. I'm going to check it out and see if I can find a few things. My buddy is there selling his guns anyway so...

If you see this really soon, and want to meet me there I could go by and get those primers

PM sent

 

[BuildingConceptsllc]

That stuff is hard to find. I've been looking and come up with nothing

 

[ryanowarrior]

I have two new and unopened 8 pound jugs of H4350. Do not want to sell. Would only trade for Reloader 16 if anyone is interested.

Brownells had it today

 

[BuildingConceptsllc]

They had 16?

Brownells had it today

I checked several times and didn't see it???

 

[ryanowarrior]

They had 16?

I checked several times and didn't see it???

At 9:27 this morning