Re: Also way off topic JCB 215S Loader backhoe
Great stuff right there. I will add that if you plan a long period of no start (months) then it is a good idea to run a little motor oil down the intake as it is running. Trickle not dump! As the engine starts to labor pour a little faster until it just dies and stop immediatly. This will give the internals a good coat of oil and keep rings and cylinders from rusting or freezing. Keeps valves from rust that can make them stick. As said before full tanks won't develop condensation like an empty tank. Moth balls work well to keep the critters from eating the silicone of hoses, wires, etc. Any exposed unpainted metal should be a spray of synthetic lube. The heavier it is the longer is stays and the better its protection but it also means it will be harder to clean off when it is time to restart it.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pwc001</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: athhud</div><div class="ubbcode-body">Keep it clean and when you do run it, get it HOT! You want to warm everything up enough to evaporate any condensation that can build up. Keep rubber (hoses/tires) out of the sun. Seal off exhaust and other areas that could be damaged by rat nests. That's all I can think of now. I never really store equipment long term, so I'm sure there is a lot I'm not considering. </div></div>
These are good points, also keep the seat and console out of the sun.
Might want to take the batteries with you, if you will be leaving it for awhile, just to keep them charged at home. They are getting expensive. Also, keep the diesel tank full to keep moisture (water) out of the tank.
Also, letting those hydraulic seals sit and get stiff in the sun, will cause bad problems down the line, try to run it as often as you can. Move every part you can, and keep it greased. </div></div>
