Rifle Scopes any way to get 20MOA without changing ring base?

[ibanezboy21]

beside the rings with the plastic inserts? i want to keep my stock rail on my rifle.

 

[MitchK]

Re: any way to get 20MOA without changing ring base?

These rings from Barrett might fit your bill.

http://www.barrett.net/optics/exrings

 

[Hoofy]

Re: any way to get 20MOA without changing ring base?

Aadmount 20 MOA

 

[RedDragunWeapons]

Re: any way to get 20MOA without changing ring base?

There are plenty of mounts out there that have slope built into them...GDI, NEAR, SPUHR, just to name a few...

 

[9H_Cracka]

Re: any way to get 20MOA without changing ring base?

A few strips of this under the base or under the rear ring will do the trick.

 

[Ultraman550]

Re: any way to get 20MOA without changing ring base?

Why do you want to keep the stock rail? Is it cost of a new rail? You can get a 20 MOA rail for under $50. I have a Weaver on my Remington that cost $25 and it works perfectly, just like ones that cost $100 +. if you need the extra 20 MOA why even think of a cheap bubble gum job on a rifle you plan to use for precision shooting?

 

[gstaylorg]

Re: any way to get 20MOA without changing ring base?

Here you go:

http://nightforceoptics.com/unimount/

http://www.laruetactical.com/larue-tactical-spr-s-mount-lt-158

There are a number of other manufacturers that make similar products as well.

 

[Armored Transport]

Re: any way to get 20MOA without changing ring base?

Burris Signature Z rings are worth a look as well.........

 

[Bedlam]

Re: any way to get 20MOA without changing ring base?

Is this a trick question?

Change the scope to one with 40MOA greater elevation travel?

 

[SCOTTx88]

Re: any way to get 20MOA without changing ring base?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ibanezboy</div><div class="ubbcode-body">beside the rings with the plastic inserts? i want to keep my stock rail on my rifle. </div></div>
I really like Burris Signature rings.

 

[ibanezboy21]

Re: any way to get 20MOA without changing ring base?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ultraman550</div><div class="ubbcode-body">Why do you want to keep the stock rail? Is it cost of a new rail? You can get a 20 MOA rail for under $50. I have a Weaver on my Remington that cost $25 and it works perfectly, just like ones that cost $100 +. if you need the extra 20 MOA why even think of a cheap bubble gum job on a rifle you plan to use for precision shooting? </div></div>

the rifle is a savage 10ba (the one with the massive rails)
i like the look of it so i want to keep it, i know the 110BA model comes with 20MOA standard, not sure if they will fit on my 10BA.

 

[ibanezboy21]

Re: any way to get 20MOA without changing ring base?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bedlam</div><div class="ubbcode-body">Is this a trick question?

Change the scope to one with 40MOA greater elevation travel?</div></div>

already brought the scope lol