Anyone making 8.6 Blackout prefits yet?

[m6z]

Anyone making 8.6 Blackout prefits yet?

Looking for a 16" 1/3 twist for my ARC Neculus.

 

[SCGunner84]

Anyone making 8.6 Blackout prefits yet?

Looking for a 16" 1/3 twist for my ARC Neculus.

I’m debating on doing an 8.6 myself for a deer and hog gun. Only thing is I’d have to get another suppressor since a standard 30 cal can won’t work for the 8.6.

 

[brazz04]

Faxon is making rem 700 barrels for it

 

[generalzip]

I’d make sure you’re using a really tough or all copper bullet with a can. Otherwise you might be sending it back to the manufacturer with shrapnel in it lol.

 

[NET65]

I asked Proof if they would be producing a prefit for AI rifles in 8.6 blackout, and it was a emphatic NO

 

[PowPowHawg]

Anyone making 8.6 Blackout prefits yet?

Looking for a 16" 1/3 twist for my ARC Neculus.

I want one bad for a TL3 to go along with my 300BO!

 

[steve101610]

Mos-tek is making barrel nut prefits with savage or Remington threads

 

[Bugholes]

We have the tools, and are working on getting premium 1-3tw barrels

 

[NET65]

We have the tools, and are working on getting premium 1-3tw barrels

Greg, you were my next call, you built me an amazing rifle a long time ago, can’t wait to get a prefit from you.

 

[bohem]

The problem is the barrel blanks. Even with a PO for 100 pc blank order the premium shops don't want to touch it.

 

[anon]

Why a 1-3 twist? Berger's twist calculator shows their 300gr bullets stable at 1040 fps, even down to 0f and sea level with a 1-8 twist. What am I missing?

 

[bohem]

Why a 1-3 twist? Berger's twist calculator shows their 300gr bullets stable at 1040 fps, even down to 0f and sea level with a 1-8 twist. What am I missing?

The twist rate puts the bullets into an extreme stress condition so that when they open up on impact the twist rate keeps them oriented point forward and accelerates expansion into what's basically a broadhead.

 

[Red_SC]

We have the tools, and are working on getting premium 1-3tw barrels

I’m hoping you’ll be selling the blanks as well.

 

[sjbryan65]

Mos-tek is making barrel nut prefits with savage or Remington threads

Anybody had experience with mos-tek? Wanted to build a blackout off an origin action so at this point the mos-tek is the only barrel with the right tenon threads.

 

[steve101610]

Anybody had experience with mos-tek? Wanted to build a blackout off an origin action so at this point the mos-tek is the only barrel with the right tenon threads.

I have a few 350 legend AR barrels from mos-tek and they are excellent.

 

[sjbryan65]

I have a few 350 legend AR barrels from mos-tek and they are excellent.

Thanks!

 

[Aaron Crist]

We well turn and chamber a barrel for almost anything. We have on the shelf 8.6Blk 1:3 barrels, with Savage thread in three lengths. I own MOS-Tek.
Aaron

 

[minorsubplot]

Anybody had experience with mos-tek? Wanted to build a blackout off an origin action so at this point the mos-tek is the only barrel with the right tenon threads.

Am doing this on an Origin with them right now, and they have been awesome so far. Good people for sure.

 

[DacianMH]

I also manufacture 8.6 Blackout ammo. I use once fired Hornady 6.5 brass, I anneal them in a AMP annealer, then size, anneal again, then final size and trim in a Honey Badger Case Trimmer and load with Maker 350gr Rex for hunting and Hornady 285gr ELD-M for target. All subsonic. I’m a licensed FFL manufacturer. Before I ship out I check them in a Sheridan case gauge. Ammo comes in a white 20rd cardboard box with styrofoam trays with my company logo and caliber.

EDIT - forgot to mention, if you save your brass I can reload it and it’ll save you money.

 

[SCGunner84]

I also manufacture 8.6 Blackout ammo. I use once fired Hornady 6.5 brass, I anneal them in a AMP annealer, then size, anneal again, then final size and trim in a Honey Badger Case Trimmer and load with Maker 350gr Rex for hunting and Hornady 285gr ELD-M for target. All subsonic. I’m a licensed FFL manufacturer. Before I ship out I check them in a Faxon barrel that’s not attached as a case gauge since no one made one yet. Ammo comes in a white 20rd cardboard box with styrofoam trays with my company logo and load info for barrel length and velocity.

Ammo is the main thing holding me back since I dont reload because already have a TL3 I could use, just order a barrel and drop it in a chassis.

 

[DacianMH]

Ammo is the main thing holding me back since I dont reload because already have a TL3 I could use, just order a barrel and drop it in a chassis.

My prices are reasonable. I’m below what Gorilla Charges at the moment and if people save their brass I can always load the bullet of their choice (solid copper or bonded ONLY) or even offer annealing service if anyone needs access to an AMP annealer. I’m all setup for it.

 

[Ross59]

I also manufacture 8.6 Blackout ammo. I use once fired Hornady 6.5 brass, I anneal them in a AMP annealer, then size, anneal again, then final size and trim in a Honey Badger Case Trimmer and load with Maker 350gr Rex for hunting and Hornady 285gr ELD-M for target. All subsonic. I’m a licensed FFL manufacturer. Before I ship out I check them in a Faxon barrel that’s not attached as a case gauge since no one made one yet. Ammo comes in a white 20rd cardboard box with styrofoam trays with my company logo and load info for barrel length and velocity.

EDIT - forgot to mention, if you save your brass I can reload it and it’ll save you money.

How do I contact you?

 

[DacianMH]

How do I contact you?

PM me and I’ll send phone number.

 

[tsu45]

Faxon is making rem 700 barrels for it

Cranking out those Remages like it’s 2001!!!!

 

[AMMOWASTER]

Maybe Faxon would sell a blank you could send to someone who does prefits

 

[Bacarrat]

Maybe Faxon would sell a blank you could send to someone who does prefits

I have a good friend that works at Faxon and he said no. They are having a hard enough time getting barrels to manufacture.

 

[AMMOWASTER]

Seems like a lot of the barrel guys are still backed up so I guess that makes sense.