Anyone need simple parts made?

StealthOwl

StealthOwl

🇺🇸
Full Member
Minuteman
Supporter
    • Feb 13, 2017
    1,755
    492
    Approaching SAM City
    #1
    Not sure where to post this, but have been kicking this idea around and wanted to offer simple machined or turned parts if anyone needs something that they can't find, or just a custom bracket/plate, adapter, etc. I'm a decent machinist for what I have to work with, but there's nothing like experience and I enjoy helping brothers out. Not looking to make money from this, so I would only ask you to cover shipping and maybe material cost unless I can work from a scrap piece. So post up or PM me and let me know what you guys need.

    Note: I don't have the ability to plate/anodize metal - if another member does, that would be cool...
     
    Last edited:
    • Like
    Reactions: Anthonyc, SD Carpenter, fx77 and 26 others
    #3
    StealthOwl said:
    Not sure where to post this, but have been kicking this idea around and wanted to offer simple machined or turned parts if anyone needs something that they can't find, or just a custom bracket/plate, adapter, etc. I'm a decent machinist for what I have to work with, but there's nothing like experience and I enjoy helping brothers out. Not looking to make money from this, so I would only ask you to cover shipping and maybe material cost unless I can work from a scrap piece. So post up or PM me and let me know what you guys need.

    Note: I don't have the ability to plate/anodize metal - if another member does, that would be cool...
    Click to expand...
    This great. I do not have a need at the moment, but would like to talk sometime.
     
    • Like
    Reactions: StealthOwl
    #7
    If you could somehow figure out making a DBM for an AI in a manners stock, you would be one busy man. There are tons of threads about putting AIs in manners stocks and it always comes down to a lack of bottom metal. If you wanted to devote your time and effort to doing that, you wouldnt need to make anything else, I imagine.
     
    • Like
    Reactions: PBWalsh and StealthOwl
    #8
    Offer an adapter plate that has a 3/8-16 threaded hole in the center and the ADM QD lever footprint on one side. Idea is that it will allow one to run an ADM QD pic rail directly on a tripod apex or leveling base. For those that have a pic rail on their riles, I can't think of a simpler, lighter QD mount option.

    Put me down for one.
     
    • Like
    Reactions: StealthOwl
    #10
    I really could have used your services had I saw this post a couple weeks ago. I needed a custom mount made for my Leica Tempus red dot so I can mount it to a pic rail. Every gunsmith I asked to do it refused for various reasons.
     
    #11
    Awesome offfer!

    Need a spacer made and walking into a local machine shop for a one off doesn't not work well. I will do some measurements tonight and PM some details. We will see what we can workout!

    Thanks very much!!

    ZY
     
    #21
    I could use a new barrel channel for my Savage b17. I could send you the original for a bit of a template. I am trying to get one with shorter side rails.
     
    #23
    Could you make these standoffs for the XLR cheek pieces and what would it cost? I would probably need 3 pairs.

    From this thread: https://www.snipershide.com/shooting/threads/new-cheek-piece-updated-group-buy.60574/


    7051265
     
    #28
    lennyo3034 said:
    I know a few people that could use a larger lug lock for an MPA chassis. For use with Nucleus.

    Simple aluminum cylinder with a tapped screw hole.
    Click to expand...
    StealthOwl said:
    If you have dimensions, please PM me...
    Click to expand...


    Did you ever get any dimensions or a working one of these I know someone has done it I just don’t know the diameter but I Could really use a few of these gladly get you whatever you need for time+materials
     
    #31
    Forgot to take picture of the non-tapered section but it was .500”. Threads were 10-32.

    The diameter I would need is 7/16. This part is just aluminum, not sure of grade or temper.


    ETA: thread size
     

    Attachments

    • C5DF2FC2-A62C-4778-B964-A9CAA6375120.jpeg
      C5DF2FC2-A62C-4778-B964-A9CAA6375120.jpeg
      620.3 KB · Views: 101
    Last edited:
    #33
    lennyo3034 said:
    Forgot to take picture of the non-tapered section but it was .500”. Threads were 10-32.

    The diameter I would need is 7/16. This part is just aluminum, not sure of grade or temper.


    ETA: thread size
    Click to expand...


    Do you this will work for a defiance action at that size I’m not sure what you are using from what mpa said the problem with defiance action is the lug is short not necessarily that it’s thin I will take a look tonight and see what it needs
     
    #39
    Saved for reference

    StealthOwl said:
    Not sure where to post this, but have been kicking this idea around and wanted to offer simple machined or turned parts if anyone needs something that they can't find, or just a custom bracket/plate, adapter, etc. I'm a decent machinist for what I have to work with, but there's nothing like experience and I enjoy helping brothers out. Not looking to make money from this, so I would only ask you to cover shipping and maybe material cost unless I can work from a scrap piece. So post up or PM me and let me know what you guys need.

    Note: I don't have the ability to plate/anodize metal - if another member does, that would be cool...
    Click to expand...
     
    #41
    What are those spacers made out of?

    Tono said:
    Big thanks to Owl for making some spacers for my Bergara BMP stock!

    In the prone position, the original maximum length of pull did not allow me get get comfortable or solid behind the rifle and keep the proper eye relief on the scope. With the added spacers that Owl made, it's perfect. I even have a few extra spacers.


    From this...
    View attachment 7057838

    Adding 4 spacers...
    View attachment 7057843

    To this!
    View attachment 7057844

    View attachment 7057852
    Click to expand...
     
    #48
    Owl is legit! Today he shipped out a custom Base to Ogive comparator insert for my OAL gauge. Excellent communication!!

    He was very appreciative of what I contributed in exchange for his service. I don't know about you guys, but he is offering one hell of a service for one-off custom/prototype machining services.
     
    • Like
    Reactions: RioKid, 10ring1, winniedonkey and 2 others
    #49
    clcustom1911 said:
    Owl is legit! Today he shipped out a custom Base to Ogive comparator insert for my OAL gauge. Excellent communication!!

    He was very appreciative of what I contributed in exchange for his service. I don't know about you guys, but he is offering one hell of a service for one-off custom/prototype machining services.
    Click to expand...

    I had the same experience with him. Made some custom pillars for a 3D printed DBM prototype for me. Parts came back very precisely machined in a very timely fashion. He's a legit dude.
     
    • Like
    Reactions: StealthOwl
    #50
    Stealthowl made some wedge parts for my mpa chassis im not even sure if the dimensions I gave him will work yet but every dimension is within .0005 of what I asked for,the finish on the parts, the shipping and packaging, and the communication was better than any company I’ve dealt with really appreciate the Work

    Almost forgot the best part
    49A09575-9E9E-4291-A2C0-2933719D10EF.jpeg
     
    • Like
    Reactions: 10ring1, SD Carpenter, Precisiondada and 1 other person
    You must log in or register to reply here.

    Similar threads

    mark5pt56
    Gunsmithing HS PST006-short action M24 stock
    Replies
    1
    Views
    221
    Elite_KG
    E
    L
    Simple Weather, Ranging, Ballistics Solution
    Replies
    17
    Views
    661
    Maelstrom
    M
    M
    Suppressors TBAC Fly 9 with a Griffin Cam-Lok or EZ-Lok Piston?
    Replies
    8
    Views
    427
    mebgardner
    M
    B
    D Cell (1.4375x20) to 3/4x20 mount anyone make one?
    Replies
    4
    Views
    332
    AMGtuned
    A
    tanker79
    S&W M&P 5.7, adding a thumb safety
    Replies
    0
    Views
    322
    tanker79
    tanker79
    Top Bottom
    Back
    Home
    Forums
    Merch
    Alerts