Anyone use Aluma Hyde II?

Thunderhorse

Sergeant of the Hide
Full Member
Minuteman
Jan 31, 2018
263
111
Central MO
When I bought my Tikka Varmint back in high school I originally wanted the blued version, but I could only find the stainless in stock near me. Now I am planning on doing a variety of upgrades listed in my sig, but since I use this as my main hunting rifle I would also like to do something about the shiny silver barreled action. I am thinking of trying Brownell's AlumaHyde II in OD; it is about $13/can so twice as much as krylon, but supposed to be much more durable.

Has anyone used this? I may also just do Krylon since that's in stock At Walmart and pretty much every home improvement and sporting goods store. If I do krylon it will be a full camo, not just coating the barrel and action, however I have read that its not durable, cracks, and comes off when it contacts gun oil.
 
Have done several with Aluma-Hyde II.

It's head and shoulders above Krylon on the toughness scale. If you prep properly and allow it sufficient time to cure it's very durable.

ZuULxI.jpg


Flat black with a matte clear coat...

9XxRXo.jpg

t0DPM9.jpg

A couple OD Winchesters, the long action sitting on the can of spray has the metal done in Parkerizing Gray

SYCTel.jpg

Coyote on the frame and slide.....it isn't as gold as the picture would imply.

All stocks pictured have a light coat of truck bed liner under the paint for texture. As with the paint, allow it to fully cure, then apply color.
 
Last edited:
Well I went ahead and ordered a can of the matte black. I was going to do olive as it is one of my favorites, but a lot of reviews said the OD color looked like foliage-and I absolutely hate foliage green.

I'll post up how it goes when I apply it. Did either of you bake yours? I am not sure if my barreled action will fit in my oven
 
Last edited:
They changed the color of the OD at some point. The first stuff I had was a brighter green than the current can.

I have found that by using the bed liner as a base coat will make the colors appear a bit darker.

I don’t use heat to cure mine, just let them air dry.

If you go the air dry route, I’d suggest leaving it alone for 4-5 days as a minimum. It’ll feel dry to the touch after the first day but will still be soft enough to mark it if bumped.

Post up a pic when you get her done.
 
I think what I will do is get a .30" wooden dowel and rig it up on a rotisserie type setup to spray it, and either use the oven to heat cure if it will fit, or build an oven out of aluminum foil and a cardboard box with a space heater. I am going to do the bolt body too, but I will tape off the head, and either use painter's tape or modeling clay to keep it out of the action.

I will be sure to post pics. Thanks again for the help guys
 
I used the mat black on a 1911 slide and cooked it in a toaster oven. It came out nice. As for durability, it ain’t Cerakote but it’s at least as durable as bluing. If I was buying barrels in the white then it’s what I’d use.
 
I have used it on several so far and for the price I think it’s hard to beat. It does seem to hold up well just not in the high wear areas.I really like the earth brown color
8159BF99-D274-4E38-8496-B89DC7CA324B.jpeg
 
Last edited:
I just used brake cleaner and heated the metal parts to get any oil out then recleaned with brake cleaner again. Painted and cured it in an electric smoker at 165. Seems to be holding up well but only has about 400 rounds through it.
 
I've used Alumahyde for several years mainly painting handguards, but after a recent experience, I am done with it and will never use it again. I properly sanded and degreased a Mossberg 500 and coated with OD Green then let it cure for one week in a 90-100 degree F closet where I cure all my paint jobs. After curing, I masked off part of the finished epoxy paint to paint another part of the gun with blue painter's tape. When I was finished, I peeled off the blue painter's tape and it took quite a bit of the Alumahyde finish with it here and there. Now I have a substantial blemish of several thousandth's of an inch thick that I have to live with or remove all the Alumahyde. It appears that it's no better than Rustoleum. Definitely not worth the extra expense or cure time.