AR-10 build, What 16 inch barrel?

PhilCam

Private
Minuteman
Apr 8, 2018
1
0
I'm building an AR-10 in .308 using a Centurion Arms Upper and Lower.

I'm looking for a 16 inch barrel, specifically on the list now is the Rainier Arms 16 match in a 1:10 twist or the Wilson Combat in a 1:11.5 twist.

Looking for opinions on these two barrels as well as suggestions for other barrels I may have overlooked.
 
I am in the middle of a similar build with a 16 inch barrel that will primarily be ran suppressed. My top two choices I am deciding between are the criterion with rifle length gas or a proof barrel with intermediate gas.
 
I am in the middle of a similar build with a 16 inch barrel that will primarily be ran suppressed. My top two choices I am deciding between are the criterion with rifle length gas or a proof barrel with intermediate gas.
I’ve always been a big fan of Proof’s AR barrels but either of those choices would serve you well. No experience with Criterion but I’ve never heard anything bad about them.
 
I have a 16" rifle gas Criterion that shoots ok. Ive shot 168 GMM, 175 GMM, 185 Juggernaut, and a few other factory loads as well as some of my reloads through it without any issues. All suppressed. Its MOA sometimes but usually a little over. I'd probably by another one if I had the chance.
20200101_142519.jpg
 
  • Like
Reactions: Quintus
You must be at least 18 years of age to use this site
You confirm that you are at least 18 years of age by continuing to use the site.