Ar10 308 used brass

[Kaveman44]

I’ve had my 223 come out with some ejector marks but nothing like this, when I anneal my brass and resize them ,will this be OK?

 

[Kaveman44]

I hope so at $1 a piece, they all have them

 

[Kaveman44]

Anyone?

 

[GONE BAD]

Run them through your die and see.
Then put some velcro on the shell deflecter.
Probably is over gassed?

 

[918v]

They b fine

 

[mtrmn]

Once you resize/decap them those dents will be gone. The expander (or mandrel) will take care of that.

 

[Kaveman44]

I’m gonna anneal and resize and see what happens, Is it worth putting an adjustable gas block, if they are not ok I will put some Velcro on

 

[Ravenworks]

I’m gonna anneal and resize and see what happens, Is it worth putting an adjustable gas block, if they are not ok I will put some Velcro on

You asked a question, someone answered.

Your gun needs tuned I'd suggest reading up on common problems with this platform.
Nothing wrong with an AGB so as long as you buy a decent product

 

[Kaveman44]

I saw that someone answered my question, my response was just telling them I was going to see if it was fixed by my normal reloading process, like annealing and expander mandrel ( like they suggested) before I put Velcro on gun, if I buy a AGB, I will buy a good one

 

[BullGear]

This is normal and can be fused again. Have at it if you can find the components.

 

[GONE BAD]

I saw that someone answered my question, my response was just telling them I was going to see if it was fixed by my normal reloading process, like annealing and expander mandrel ( like they suggested) before I put Velcro on gun, if I buy a AGB, I will buy a good one

Personally I don't like AGB's. I have them
but I don't run suppressors and have found there are other way to skin the cat.
The last three builds I didn't use them. Payed more attention to gas port size and buffer system and they run fine.

My 6 ARC is the first one that I've used velcro on. Was getting the case mouth dented a little so just put a little bit on the shell deflecter. No biggie.
Yours is over gassed and you can go after a fix anyway you choose.

 

[camocorvette]

I put velcro on every AR upper I've ever had. Just saves the headache of little dents when your ocd about your brass.