My order was placed 4/18 ...I called earlier this week and was told it would be 2-3 more weeks. I was also told they are having challenges with getting the 3D printing material given the demand for other Covid uses. That would be 8-9 weeks in total so trending towards the longer cycle.
-
Having trouble using the site?
Contact support
Autotrickler V3 - CE Products?
- Thread starter NiteQwill
- Start date
Wanting to go to this set up, Trying to get over $120 shipping fee to AK when lower 48 and Canada is free. 
Ordered mine March 25, received end of May. At the time, it sounded like CE Products had been waiting on a bulk shipment of the Autotrickler parts to package up with scales and send back out. With enough back orders built up - probably shipping out in batches when they get the parts.
Anyone's autotrickler just randomly shut off and turn back on by itself sometimes? I've had it happen a few times while dumping some powder.
Are you using the right power transformer? I've never had that happen (V2) but mine came with 2 power supplies. I think one is original to the scale and the other has more output. Seems I saw something a while back about this happening, and the wrong power supply was being used. If you got 2, be sure you are using the higher rated one.
Mine did the exact same thing. I sent Adam an email that's what he told me.
Not a single issue since.
Also, I saw that Unknownmunitions will be selling Autotricklers soon.
I do have the two power supplies that came with it. Didn't even know there was a difference. Makes sense. Thanks a lot.
Received the same. Im assuming they only sent it to the peoples who orders fall within that 38 unit so I hope to get the payment email soon.
Order 5536
Last edited:
I'm still waiting on # 5534. Ordered on 4/12/20 so I'm right at the 8 week ETA. Hope I am in this group being shipped.
ETA - Just checked my inbox again and saw I have the same email. The senders display name was different than my original message from CE and that's why I missed it.
ETA - Just checked my inbox again and saw I have the same email. The senders display name was different than my original message from CE and that's why I missed it.
FYI - My email came from A&D FX-120i Reloading Scales & AutoTricklers & Autothrow <[email protected]>
Checked spam folders. Still waiting. Only being two numbers off of you I would have expected it this morning as well.
Milo, I'm not implying anything negative, but I'm honestly shocked you don't already have one of these!
I suspect (judging by some of your meticulous posts on testing), you're really going to like the ATV3.
I suspect (judging by some of your meticulous posts on testing), you're really going to like the ATV3.
I’d give them a call. I got an email confirmation when I put in the preorder and that’s how they notified me of final payment. You may want to get your email on file
Bad news guys, just called, they only got 15 of the 38 Autotrickler units shipped in.... let the wait continue....
I'm #6111, so I guess I'm looking at late Aug, early Sept? maybe???
BTW , just as a matter of conversation, what Area 419 "upgrades" gave you the most "bang for the buck" or made things more accurate or easier?
If that's possible?
I'm thinking the autotrickler billet body/stand and the see through lid for a start?
BTW , just as a matter of conversation, what Area 419 "upgrades" gave you the most "bang for the buck" or made things more accurate or easier?
If that's possible?
I'm thinking the autotrickler billet body/stand and the see through lid for a start?
I had # 64 of the original Auto Trickler system, feeding it was a giant PIA. Sold it, had it 2 mos and paid for the first upgrade on trickler model, kinda said fuck this. I do believe now he has model that will stand, looking forward to it now.
I do fine with CM's, and feel I could continue with them, but there are times when a guy ends up with a charge specific load, and the V3 will shine. I did miss not having the fx 120i stand alone for verifications at times.
I am keeping 3 CM's for 223 ammo, what the heck, Dillon not for me.
I wish I had read this yesterday, I seemed to have been dropped like a fat chick just when shit was getting serious.
Order #6125 placed on June 15th...
Day 3.... Took up smoking again.
Day 3.... Took up smoking again.
5707 here placed on Apr 25, 2020. Assuming these are not the order numbers for just Autotricklers. I did contact Adam 2 weeks ago (Jun 2) and was told no later than the 26th. Fingers crossed.
I quit smoking to pay for ammo in the 90's. $1.75 a pack and $14.00 a carton on base around 98. Blazer .45 ACP was $8.99 a box. 5 boxes of ammo or 3 cartons of cigarettes.
Last edited:
While this may? or may not? be the right place to ask, but with a gathering of like minded people, I wondered if anyone considered? or is using an "anti-static" mat? or a power conditioner with there Autotrickler set up? Nays & Yays appreciated. Cheers
Interested in this as well. I was planning on just mounting it to a sturdy table but I’m sure there is more m not thinking about
I have been following the autotrickler stuff for awhile and i think im finally about to pull the trigger and put a deposit down. It sucks i will potentially be waiting for 3ish months but with a baby due in the next 4 weeks i will be busy enough it should fly by. I have just been putting up with the charge master long enough. It does its job but i feel like im ready for the upgrade. It’s getting to the point for me that the known fluctuations of .2gr +/- on my charge master is kinda getting under my skin.
I ordered mine on 5/8....guess I can slide that purchase of the AMP Annealer up in front since I can wait until next month to pay off the autotrickler.
I do use a power conditioner, no anti-static mat, but I did ground it. I also have it on a marble slab.
Trevor just called me. Sounds like a bunch showed up today. Mine is now paid in full and enroute.
5532 - paid for and en route via UPS.
Showing as still being in Hodgkins, Illinois since Friday, with a supposed scheduled delivery date of tomorrow.
Shall see if they manage to lose this in the same manner they did a 6mm Bartlein barrel I sold on here last month.
Showing as still being in Hodgkins, Illinois since Friday, with a supposed scheduled delivery date of tomorrow.
Shall see if they manage to lose this in the same manner they did a 6mm Bartlein barrel I sold on here last month.
Received mine in a few days after it shipped and it’s all set up and ready to do. The FX-120i manual is 50+ pages. You only really need the calibration section from it. My FX from CE was already programmed correctly for the AutoTrickler, which I’m assuming CE did for me.
5532 - paid for and en route via UPS.
Showing as still being in Hodgkins, Illinois since Friday, with a supposed scheduled delivery date of tomorrow.
Shall see if they manage to lose this in the same manner they did a 6mm Bartlein barrel I sold on here last month.
I just received mine today. Seems like it got stuck in Hodgkins IL for around a day before it moved on. Seems like they sometimes miss scanning a package so it's in route, but the tracking info doesn't update. Fingers crossed for you.
When you say programmed what specific programming/settings does it have to be in for it to integrate with the Auto T V3?
