Autotrickler V4 advice

[Islas82]

So I just took the plunge and got one of these. should be here in a couple weeks, any advice from current or former users? Planing on running varget, H4360, and N565.

Didn’t find a dedicated thread.

Thanks

 

[jpjulian]

Watch Adam's videos flow rate and calibration when changing powders. They are very helpful. Contrary to some opinions, you don't need any shims or tips to get excellent results. Getting the flow rate correct, between .1 & .2 with closer to .2 being better, is crucial to smooth and accurate drops. This year I've mostly used VV-N555, H4350, & H335. Varget, IMR4350, IMR4895, XBR8208, RL-15 & 17, TAC, have been used with accuracy rates on average of 96% within the .02+- grain accuracy for the scale/dispenser system. You are going to love it.

 

[Islas82]

Watch Adam's videos flow rate and calibration when changing powders. They are very helpful. Contrary to some opinions, you don't need any shims or tips to get excellent results. Getting the flow rate correct, between .1 & .2 with closer to .2 being better, is crucial to smooth and accurate drops. This year I've mostly used VV-N555, H4350, & H335. Varget, IMR4350, IMR4895, XBR8208, RL-15 & 17, TAC, have been used with accuracy rates on average of 96% within the .02+- grain accuracy for the scale/dispenser system. You are going to love it.

Thank you, I have seen his videos and will rewatch them once I have the unit on hand.

 

[Schw15]

Thank you, I have seen his videos and will rewatch them once I have the unit on hand.

I run n565 a ton in my v4 with great success. I level out the unit and then I bought the plastic spacers off of here or they sell the same ones on unknownmunitions.com I use the number 3 with n565 n568 imr 7977 with awesome success once you get the v4 tuned. I'm 100% beliver in the spacers though just my opinion.