Reloading Equipment Autotrickler V4 Panel Set

[BuildingConceptsllc]

@NiteQwill Not necessary for a proper fit. They are identical in size to the clear panels but my panels reflect the green light better than clear. If you do not care about that you could stick with clear and save $5.

Any word on the V3 w/419 kit on it? Seems like it would be very close to these. Maybe the opening is a tad smaller for the 419 trey, but would look very similar.

 

[-Obsessed-]

Any word on the V3 w/419 kit on it? Seems like it would be very close to these. Maybe the opening is a tad smaller for the 419 trey, but would look very similar.

I've started modeling it out. I think the top plate will be easy enough to modify. I must need to double check some angles.

There are a lot of special requests right now:

V4 with 419 Cup
V3 with ATV3 Cup
V3 with 419 Cup
V3 with 419 Cup and Tray.

Going to accommodate them all if I can as an act of good faith to the reloading community.

 

[BuildingConceptsllc]

I've started modeling it out. I think the top plate will be easy enough to modify. I must need to double check some angles.

There are a lot of special requests right now:

V4 with 419 Cup
V3 with ATV3 Cup
V3 with 419 Cup
V3 with 419 Cup and Tray.

Going to accommodate them all if I can as an act of good faith to the reloading community.

Yeah that is a lot.... seems like you'd be able to make one for the v3 that worked for all 3 of those v3 options though right? It's all good, and much appreciated, I see you have a lot of requests

 

[Dmvadala]

i'll take a wind screen for a V4

 

[airborne_trooper]

PM sent

 

[xb52hcc]

Very new to purchasing from here how do I send funds to you for two sets of you screens.
Thanks in advance Don
[email protected]

 

[-Obsessed-]

Very new to purchasing from here how do I send funds to you for two sets of you screens.
Thanks in advance Don
[email protected]

Sent you a PM.

 

[Ronster19]

Received my pan cover today and very impressed with it. Good quality, excellent fit to the scale and looks good on my AT. I'm impressed with the quality of the design and the cover.

 

[Zack_va248]

I’m in for a set once you get it figured out for a v3 with area419 cup/tray combo

 

[-Obsessed-]

I’m in for a set once you get it figured out for a v3 with area419 cup/tray combo

Awesome! I have the CAD work finished for it, but out of respect for those that paid for the V4 versions I'm getting those out the door first. I have probably a week left before I'm caught up.

I have purchased an additional printer but it leaves a lot to be desired print quality wide so I won't sell pieces off that machine until I get it tuned a bit better.

 

[Zack_va248]

Awesome! I have the CAD work finished for it, but out of respect of those that paid for the V4 versions I'm getting those out the door first. I have probably a week left before I'm caught up.

I have purchased an additional printer but it leaves a lot to be desired print quality wide so I won't sell pieces off that machine until I get it tuned a bit better.

No rush brother your doing solid work! Just wanna support you and a good product once you’re ready. Let me know!
Buddy of mine just got his v4 so I’ll get him on board and throw you some business as well!

 

[anginaprinzmetal]

Got mine in white
Perfect fit
If you make a V3 will definitely pick one
thanks

 

[Ruff 364]

Arrived and perfect fit. Order with confidence!

 

[-Obsessed-]

Thanks again for all the interest!

To give an update, the color matched filament is now officially gone. The last set was finished last night. I'll keep an eye out, but assume that white is the only option going forward.

Based on current interest/throughput, I have about 3 or 4 more days of producing V4 w/glass cup versions; I'll then start printing and fine tuning the V4 with 419 cup, then will do the V3 versions. Those version should go much faster as I don't anticipate a ton of orders up front. But I've been surprised before.

I appreciate all the patience, and support!

 

[VSP968]

I’m in for a V3/419 version when they’re ready.

 

[BuildingConceptsllc]

Thanks again for all the interest!

To give an update, the color matched filament is now officially gone. The last set was finished last night. I'll keep an eye out, but assume that white is the only option going forward.

Based on current interest/throughput, I have about 3 or 4 more days of producing V4 w/glass cup versions; I'll then start printing and fine tuning the V4 with 419 cup, then will do the V3 versions. Those version should go much faster as I don't anticipate a ton of orders up front. But I've been surprised before.

I appreciate all the patience, and support!

I would think you will have a good bit of the v3 with 419 cup

 

[-Obsessed-]

V4 set with the 419 cup is now ready to go.

Prototype picture which is basically final:

This uses a new cup guide to replace the old one.

PM me if you are interested in these. Please note that you want a V4 set for the 419 Cup.

Only color is white on these. $30/set shipped includes side panels even though they are omitted here.

Once I get the V3 versions done (soon) I'll create a new listing that cleans all this up. It's a bit of a work in progress.

 

[Zack_va248]

V4 set with the 419 cup is now ready to go.

Prototype picture which is basically final:

View attachment 7897016
This uses a new cup guide to replace the old one.

PM me if you are interested in these. Please note that you want a V4 set for the 419 Cup.

Only color is white on these. $30/set shipped includes side panels even though they are omitted here.

Once I get the V3 versions done (soon) I'll create a new listing that cleans all this up. It's a bit of a work in progress.

Can’t wait to get mine! Thanks for your hard work! Looks great

 

[mikomonday]

Amazing work, really glad to see the community stepping up and making accessories so quickly for the V4. Just sent a PM for a set!

 

[methos12]

Does this clear the 419 tray replacement? It clears the adhesive guide you stick to the stock FX-120 tray so my guess would be 'yes' but didn't see any confirmation of them being compatible.

 

[-Obsessed-]

Does this clear the 419 tray replacement? It clears the adhesive guide you stick to the stock FX-120 tray so my guess would be 'yes' but didn't see any confirmation of them being compatible.

The V4 isn't compatible with the 419 Tray as the drop location is different.

The V3 version will be compatible with the tray. The tray sits up a hair taller than the original platform. The guides and top plates have chamfers to them that helps clearances but the tray obviously doesn't have that so I'm lifting it a bit.

I'm working with a member that has the 419 Tray (I don't have one) to test a prototype.

 

[Jardinski]

Just got it in, works great at keeping those kernels off the scale!

 

[-Obsessed-]

Just to give everyone an update, I am ALL CAUGHT UP on getting these sets out! I have a few extra of the V4 sets for use with the original glass cup that are "in stock" that I can ship right away. The 419 cup version will take a few days once payment is received to get out the door, and the V3 version is currently out to another member here for some test fitting since I don't have a V3 w/419 tray/cup to test against. I hope to have some definitive answer on the V3 versions soon enough. Once that happens, I'll close this thread down and open up a single, consolidated thread with all the clutter removed and clearer descriptions on what each part does, what is included with each set, etc etc.

Thanks again everyone, and if you purchased a set or reached out and have NOT been sent tracking info yet, please let me know!

I'm also in the process of leaving feedback. SH limits the amount of feedback I can give each day which I wasn't aware of at first, so I apologize for the delay there.

 

[-Obsessed-]

Hey everyone, updated thread that has all panel sets (pics, details).

Please post there from here on out:

https://www.snipershide.com/shootin...s-v2-v3-v4-keep-kernels-off-your-pan.7130980/

 

[RedBreast21]

Just to add to what everyone already knows - these panel sets (especially the top plate that covers the scales) is an excellent upgrade, and @-Obsessed- is more than GTG.

 

[-Obsessed-]

Just to add to what everyone already knows - these panel sets (especially the top plate that covers the scales) is an excellent upgrade, and @-Obsessed- is more than GTG.

Thanks for the kind words!

I appreciate all the patience! I have quite a few orders going out tomorrow and will be sending tracking to those folks soon.

 

[Drhorsepower]

Bump for a good product and awesome person!

 

[Inline6power]

Oh man!! I want a set for v4 with 419 cup and a set for v4 witu glass cup. I have two running at the molment and this would be the icing on the cake!

 

[frer]

pm sent about one of these

 

[-Obsessed-]

Responded to all PMs. Also, have updated pics and all versions available in a newer thread here.

 

[BOB M]

Pm incoming