Badger M2008 Build

#2
Re: Badger M2008 Build

DSCF0010Medium.jpg


Marty includes a blueprint of the barrel threads with each action. 1.0625"-16 3A pitch
 
#5
Re: Badger M2008 Build

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYS338</div><div class="ubbcode-body">same picture twice...... did you mean to put in a different one? </div></div>

Oops, thanks.
 
#9
Re: Badger M2008 Build

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: WTW</div><div class="ubbcode-body">That lathe does do great work...You should have detailed the 284 Frankenstein Mauser project... </div></div>

The lathe works fine but you have to watch out for the joker turning the dials....

We can do a build thread after you burn up the barrel, so... January?
 
#14
Re: Badger M2008 Build

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ryanjay11</div><div class="ubbcode-body">If only this turns out to be as accurate as a Savage.... </div></div>

At least the ejection port will be on the right side....
 
#19
Re: Badger M2008 Build

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ryanjay11</div><div class="ubbcode-body">Ha ha I like it. I'll bring my 10-22. </div></div>

Do you even own a magazine for that thing that holds more than 10 rounds?
 
#20
Re: Badger M2008 Build

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 308MAUS3R</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ryanjay11</div><div class="ubbcode-body">Ha ha I like it. I'll bring my 10-22. </div></div>

Do you even own a magazine for that thing that holds more than 10 rounds? </div></div>

I never will. I'm not sure what you can do with a banana clip on a 10-22 that can't be done in 10 rounds.
 
#22
Re: Badger M2008 Build

Back to the topic at hand...

Badger Ordnance did the necessary modifications to the AICS:
DSCF0017Medium.jpg


To use AICS magazines with an M2008, the mag catch needs to be shortened approx: 0.040"
 
#29
Re: Badger M2008 Build

DSCF0033Medium.jpg


Used some Birchwood Casey Aluminum Black to darken the aluminum that was exposed during inletting. It worked better in some spots than others, an acid brush would probably be ideal, but we didn't have one, so a paper towel had to do.
 
#32
Re: Badger M2008 Build

It is going to be tiger striped black and dark earth.

Do you want to KG your barrel when we do this one? The glare from a shiny barrel will get you killed in a hot zone.
 
#38
Re: Badger M2008 Build

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tt350z</div><div class="ubbcode-body">Just curious, what's the turn around time from Badger for getting the inlet done on a AICS? </div></div>
This.
 
#39
Re: Badger M2008 Build

My inlet from Badger took 10 days - $120


----On Oct 27, 2009, at 3:22 PM, [email protected] wrote:

Turn a round is about 10 days, Just all a note with return shipping info and which mags you will use,
AICS or AW.

You can keep the skins if you want.

Marty

Martin Bordson
Badger Ordnance
1141 Swift St.
North Kansas City, MO. 64116
816 421-4956
816 421-4958 FAX
 
#42
Re: Badger M2008 Build

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: koz</div><div class="ubbcode-body">My inlet from Badger took 10 days - $120


----On Oct 27, 2009, at 3:22 PM, [email protected] wrote:

Turn a round is about 10 days, Just all a note with return shipping info and which mags you will use,
AICS or AW.

You can keep the skins if you want.

Marty

Martin Bordson
Badger Ordnance
1141 Swift St.
North Kansas City, MO. 64116
816 421-4956
816 421-4958 FAX
</div></div>

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 308MAUS3R</div><div class="ubbcode-body">Yep, it was about 2 weeks or so including transit time. </div></div>

Thanks guys.

Just wondering since mine's been there almost 2 weeks and the check hasn't been cashed yet since the finds are still in my account.

I guess if it doesn't move in the next week I'd give them a call to see if there's any issue
 
#45
Re: Badger M2008 Build

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 308MAUS3R</div><div class="ubbcode-body">
IMG00029.jpg


5 shots, 100 yds, 0.418" center to center </div></div>

That paper looks almost to perfect to have been shot... did you clean off the frayed edges?
 
#47
Re: Badger M2008 Build

ryanjay11 is correct, the target used was a Tip Top. It's made of a plastic-like material that produces bullet holes that look like they were punched out with a paper puncher. I really like them for shooting groups because of the clean results.
 
#48
Re: Badger M2008 Build

Interesting. I might need to look into those. The Shoot N See's are handy but they barely stick to wood and if you scratch them before you shoot them there is no point in having them!
 
You must log in or register to reply here.

Similar threads

harry_x1
What is your idea of a perfect PRS rifle build?
Replies
37
Views
2K
Cody S
Cody S
Mozak
SOLD Badger Ordnance M2008 Accuracy International AICS chassis 338 Lapua magnum Rifle
Replies
24
Views
3K
Mozak
Mozak
SINKorSWIM
SOLD Badger, KRG, Brux rifle
Replies
12
Views
1K
SINKorSWIM
SINKorSWIM
E
Accessories M40A3 / M40A5 Parts - McMillan A4, Badger M5 DBM, Badger Rail, Schneider Barrel
Replies
6
Views
737
S3090
S
A
KRG C4 Opinions
Replies
17
Views
813
Evintos
E
Top Bottom
Back
Home
Forums
Merch
Alerts