any one know of any that work? several little fans on market pushing ambient air thru the bore . had 1 and it was useless. pushing ambient air (95+ here in summer) is pretty much a non starter. any other devices on the market or knowledge about making one?
barrel cooling device ?
- Thread starter mosin46
- Start date
The Riflekuhl does work but is delicate, sounds annoying as F and chews through a battery quickly. Additionally the magnet will wipe the compass calibration on a Kestrel if it gets anywhere near it.
Someone else (here I think, may have been accurateshooter though...) made one from a rechargeable air mattress pump and vinyl tubing.
Amazon product ASIN B0923NQK83
They also cut the base off a piece of brass for the specific rifle(s) and used it as a form fitting nozzle, not really needed IMO, a good fit on the tubing to the chamber is enough.
Someone else (here I think, may have been accurateshooter though...) made one from a rechargeable air mattress pump and vinyl tubing.
Amazon product ASIN B0923NQK83
They also cut the base off a piece of brass for the specific rifle(s) and used it as a form fitting nozzle, not really needed IMO, a good fit on the tubing to the chamber is enough.
Water works, run a patch after for the quickest cool down.
But I use a large camping fan and make sure to stand the rifle up, helps cool it faster
But I use a large camping fan and make sure to stand the rifle up, helps cool it faster
17.99 + shipping on amazon .
one of these pumps with a smaller hose to put inside the chamber is great we also have one of those chamber chillers but the air pump puts out 100x's more air it's not quiet but it works and is cheaper than the chamber chiller at almost 40.00 or more ( items related to shooting they jack up the price ) it can charge in your car if need be but holds enough of a charge that's lasted us two trips to the range .
I made one.
Printed this:
www.thingiverse.com
Bought this:
Amazon product ASIN B07L9M8T8Fand
Amazon product ASIN B094G1GL8T
Works OK for the $15 I have in each of them.
Printed this:
Chamber Cooler by alcarl88
I designed this to cool down the chamber and barrel after strings of fire to get you back on the target sooner. It's good for sighting in or load development. I've tested it in Rem 700, Win 70, Weatherby Vanguard and Ruger 111. It fits in both long and short action rifles. It was designed around...
www.thingiverse.com
Amazon product ASIN B07L9M8T8Fand
Amazon product ASIN B094G1GL8T
Works OK for the $15 I have in each of them.
We use something like this.. ..
www.northerntool.com
overkill maybe.
Lugging the generator around sucks
XPOWER P-230AT 1/5 HP 925 CFM Multi-Purpose Mini Mighty Air Mover, Utility Fan, Dryer, Blower with Built-in Power Outlets and Timer Blue | Northern Tool
This XPower Mini Air Mover/Dryer is small but mighty, producing a plentiful airflow capacity for small to large jobs in every size location. Weighi...
overkill maybe.
Lugging the generator around sucks
If the air’s 95 and let’s say your barrel is 200 it’ll still cool through convection. It probably just didn’t move enough air so it was slower. That’s why a fan feels cool, but a blast from a high pressure air hose feels cold.
Get a small air tank and rig up a long soft nozzle and blast the heat out. Seems like a good excuse for a small onboard compressor mounted under your vehicle.
Similar threads
