• Get 30% off the first 3 months with code HIDE30

    Offer valid until 9/23! If you have an annual subscription on Sniper's Hide, subscribe below and you'll be refunded the difference.

    Subscribe
  • Having trouble using the site?

    Contact support

Rifle Scopes Best 34mm rings?

gingerking5566

Private
Banned !
Full Member
Minuteman
Oct 31, 2017
47
17
Just upgraded my scope to a nightforce atacr. Needing some new rings and looking for suggestions. Looking at Hawkins precision/nightforce.
Any other options I need to look at.
Will be mounted on a 264 win mag and eventually a 7x300 win mag
 
I've had good luck with Seekins as well. I'm gonna check out the Talley Tactical 6 screw for my next build though because they come in FDE . They've got them listed on SWFA's web site. Any body know about them?
 
I don't think there is a "best" set of scope rings any more than there is a best scope. Lots of really nice ones out there; choose any of the top tier rings mentioned and you will be happy. I use Nightforce Ultralight and Badger.
 
That's the beauty of the ARC rings, the bottom is solidly clamped to the rail and the "caps" hinge around that so when you tighten that top bolt it just presses the scope straight down in to the bottom of the ring. Nothing wants to rotate the scope tube and you can swap scopes without removing the rings from the rail, unlike vertical split rings where everything has to come apart.

The ARCs are very nice. They look a little goofy until you start understanding the design elements, then it all becomes clear.
 
  • Like
Reactions: BigTex
"American Rifle Company...
Scopes mounted in these rings and on rifles not well treated, not even a shiny spot left on the scope tube"


SO you are saying ARC rings will ruin your scope finish?

I understand the statement to say that the rings do not even leave a shiny spot on the scope tube, even after the entire rig has not been treated well.

Myself, I have standardized on Spuhr one piece mounts. I'll never use individual rings again. One piece mounts (Spuhr and others) eliminate misalignment that is possible with using individual rings.
 
  • Like
Reactions: DEWD_STUFF
I go with Vortex with my new Kahles, i dont have money to buy two Spuhr, even that they are maybe the best one mount there is , but they are also a bit pricey.
Vortex precision rings that i have used on my 30mm scopes, i have found none of complaining, so i think they will work just fine with Kahles too.
 
  • Like
Reactions: Threadcutter308
My first choice are ARCs. Then Seekins. Then NF UL if you are counting ounces. Spurs may be great but I don’t care for the multitude of chincy screws they come with.
 
I’ve used nightforce ultralight rings and they worked, I’m using seekins now and they work. I have a pair of EGW tactical rings just waiting to be used, so I can’t really comment on how the are ( I expect they will “work”), but I can say that the finish on them blows the seekins and nightforce out of the water IMHO.

I’ll have to say that I like the seekins for the fact that they have the recoil lug machined into the bottom (not a part of the cross bolt) and that they use torx screws for the clamp AND the caps, so you don’t have to carry different wrench around just for the clamp bolt.
 
Vortex ( Seekings) mounted yesterday.
Really like the quality of these rings.
ZXMn3M1.jpg