Hey guys, I wanna mount my NF 4-16 F1 on my AR15 build and there is a shit ton of mounts out there. Which ones do you guys suggest? I wish I could find something similar to the ARC M10 ring mounts functionality but not sure thats possible... I already tried a set of ARC med rings but they are a little bit too low and i need the scope more forward as well, pretty much like all the AR mounts are made. What say ye?
-
Having trouble using the site?
Contact support
Rifle Scopes Best AR15 34mm mount?
- Thread starter ICU22250
- Start date
I'm gonna see if I can find some online to have a look at... I don't want anything with vertical split rings...
I am very partial to the Aadmount. I have a couple of the 34mm ones and they have been flawless.
ILya
ILya
I really like the American Defense QR mounts for the AR platform. https://www.americandefensemanufacturing.com/view/product/1020/description/
You don't need the 20MOA mount for your setup unless you're looking to shoot well beyond the platforms capabilities, these scopes have a ton of travel. I ran mine on my DMR rifle with a Geissele 05-418 mount and never came close to using all of the available travel. I've got that mount for sale in the PX right now too, it won't work with the S&B 5-20US that I have on order.
I have never had a bad mount. Every one held scope properly. It comes down to budget and features.
One piece or two? Is weight an issue? Q/D or tool removal? Need level in mount? Cant? Does it need to be taticool or just hold the scope?
I have used with perfect satisfaction ADM, Spuhr, USO, NF, KAC, Badger and the outfit that makes the Titanium rings who's name escapes me now.
Spuhr is super high quality and ADM is a great value. All are very good mounts.
Is resale an issue? Spuhr seems to hold value well in the popular models.
Good luck with your project.
One piece or two? Is weight an issue? Q/D or tool removal? Need level in mount? Cant? Does it need to be taticool or just hold the scope?
I have used with perfect satisfaction ADM, Spuhr, USO, NF, KAC, Badger and the outfit that makes the Titanium rings who's name escapes me now.
Spuhr is super high quality and ADM is a great value. All are very good mounts.
Is resale an issue? Spuhr seems to hold value well in the popular models.
Good luck with your project.
Amazing to me that no one suggests a Warne mount. They are pretty much the go to mount in 3 gun, they have huge popularity there.
I have two of them on AR's, and if they can hold zero while I am tossing those rifles around in and out of dump boxes, then they deserve my business. Short of being in a war zone, no one is harder on a rifle than a 3 gunner.
I have two of them on AR's, and if they can hold zero while I am tossing those rifles around in and out of dump boxes, then they deserve my business. Short of being in a war zone, no one is harder on a rifle than a 3 gunner.
Ya know, your right, I don't really need the 20Moa. Sometimes I just get used to buying stuff a certain way and get tunnel vision.... PM me about your mount, I'm still looking...
I used to recommend Warne mounts, but started seeing QC issues with them late last year. It is probably statistically insignificant, but to me it looked the quality of their work went down, so I stopped, especially when it comes to precision scopes. I personally saw two single piece Warne mounts that were machined wrong and chewed up the tube of a scope. It may have been an aberration, but that kind of stuff makes me wonder what sorts of an assymetric pressure they are putting on the tube.
ILya
I've been eyeballing the Spuhr mount, they are Nice, but damn they're expensive as hell. That's all that's been keeping me from pulling the trigger on one... does yoirs have the bubble level and 20 moa?
I've got a Nightforce 34mm cantilever 20 moa mount, like new...$200
shipped
https://shop.opticsplanet.com/night...MI2teAkpX51wIVU1cNCh2xawCfEAQYBSABEgL17PD_BwE
shipped
https://shop.opticsplanet.com/night...MI2teAkpX51wIVU1cNCh2xawCfEAQYBSABEgL17PD_BwE
I was looking at the SP-4616 in the Spuhr, I'm gonna do some calling around and see if I can get some shaved off... I've always been interested in them.
Had a Spuhr, $450+ if you can't find a deal (no thanks to you Mile High) it just wasn't worth it. Next 34mm mount for my AR is a Badger with a bubble level of my choice.
looking at the Badger, it doesn't look like it gives you very much extension. I could be wrong though, having never had one in my hands or on a rifle...
It's slightly cantilevered, but nothing extreme...however the mounting length is approximately half that of the Spuhr and the ring caps aren't nearly as long either: https://www.badgerordnance.com/media/wysiwyg/Specifications/306-67.png
Last edited:
I'll give you a screaming deal on a Badger
https://www.snipershide.com/shootin...-for-sale/6774611-badger-34mm-one-piece-mount
https://www.snipershide.com/shootin...-for-sale/6774611-badger-34mm-one-piece-mount
I have the standard JP 34mm mount and like it a lot. Very well made, especially given the price. It would be better if it was extended more, but it works well for me.
I have two Warne mounts-one is a 30 mm 0 MOA on my HB AR and a 34 mm 20 MOA on my 6.5 Creed AR and they're both awesome. I've changed scopes on both mounts and haven't seen a mark one on any of them.
I have JP on 3 AR's and have gotten along real well with them running NF scopes. Not one issue. However, I have a just picked up a factory 2nd Sphur QDP 4616 to mount a S&B PMII that I have had laying around from Mile High Shooting Supply for $350.00. JP mount will not work with a S&B due to the illumination nob.
Well, I finally settled on the Spuhr 4616.. Found one in the PX for a really good deal, now I just hope it gives me enough extension to get my eye relief right... It didn't come with the wedge for leveling, wonder if I could get Spuhr to send me one out? Thanks guys for all the suggestions...
Similar threads
