Looking for something similiar to what the Ukrainians are using for their snipers. the UAR-10... would it be better to go 16" or 18"...also, is AERO the best option to go with? Lastly, better to build it or to by one already made?
-
Having trouble using the site?
Contact support
Best budget friendly AR-10 sniper rifle?
- Thread starter ueb_30
- Start date
Asking for a friend.
Budget ? Engagement range ? Accuracy requirements ? Weight? Optics system ? Why Ukranian ? Experience building other AR-10's?
Budget ? Engagement range ? Accuracy requirements ? Weight? Optics system ? Why Ukranian ? Experience building other AR-10's?
Find an Aero already built in the PX if you can. It’s probably bang for buck budget AR10. Large frame ARs can have a lot of compatibility issues that translate into functional issues. There’s plenty of threads on here discussing folks woes. Save yourself the trouble.
Here’s a possible start if you can’t find a complete build.
www.snipershide.com
Here’s a possible start if you can’t find a complete build.
Firearms - WTS - New Aero M5E1 receiver set
All pieces are new and have only been unboxed for pics/example. AERO M5E1 upper with built in TBAR handguard mount. AERO M5 lower. Comes with trigger pins, takedown pins and wilson combat bolt catch SGT of ARMS 17" ARCA handguard is $220 shipped if interested. $310 Shipped/Insured
www.snipershide.com
Last edited:
I have 2 308 ar’s and have shot more than a few. The best budget I’ve encountered is the M&p10 sport, incredibly accurate rifle for what it is and is in the middle weight wise. Downside is proprietary parts and it will come with a gas port to small for nato rounds(easily fixed). Since I drilled the port just a hair it’s been 100% reliable. Aero makes good firearms, I’ve used allot of their parts on other builds, but if I was going to spend that much I would get the sig tread 308, if your going to build it aero is the highest quality affordable option.
Last edited:
Sorry btw as others said if you build it be prepared for a pain in the ass if you use allot of mixed parts. The ar10/308 isn’t nearly as standardized as the ar15 platform, so the more you mix and match the more you will end up changing things to work. I built a 308 using a 2A xanthos upper and lower with other mixed parts and it took a few months of tinkering to get it reliable, and if you build it do yourself a favor with a adjustable gas block from the start.
Last edited:
yea not trying to build one. Do 308 AR's work well suppressed? Im looking at these 2 right now
www.midwayusa.com
www.eurooptic.com
Armalite AR-10 Competition Semi Automatic Rifle 308 Winchester 16 SS
The Armalite AR-10 A 3 Gun 1-STG Rifle was purpose built for 3-Gun and practical rifle competition, the AR103GN's are ready to dominate, right...
www.midwayusa.com
Armalite AR10 .308 Win 18” Bbl Tac Rifle AR10TAC18
Armalite AR10 .308 Tac Rifle 18" AR10TAC18 | Only at EuroOptic.com!
Jeez, if you’re entertaining that budget get a used Seekins SP10 in the PXyea not trying to build one. Do 308 AR's work well suppressed? Im looking at these 2 right now
Armalite AR-10 Competition Semi Automatic Rifle 308 Winchester 16 SS
The Armalite AR-10 A 3 Gun 1-STG Rifle was purpose built for 3-Gun and practical rifle competition, the AR103GN's are ready to dominate, right...Armalite AR10 .308 Win 18” Bbl Tac Rifle AR10TAC18
Armalite AR10 .308 Tac Rifle 18" AR10TAC18 | Only at EuroOptic.com!
Btdt multiple times.
A couple tips-
1.) Think hard about a 6 arc or Grendel. 308 is really not very good at all, and unless you have heavy logistics in your favor, it honestly doesn't make much sense. That said, I have an aero m5 308, but don't think highly enough of the platform to spend for the premium players.
2.) If you want to suppress it without any screwing around (and judging by this post OP fits that profile) get an extremely low back pressure can. Pewscience can quantify that, but good options would be a vented cgs Helios, oss/huxwrx or sandman K.
A couple tips-
1.) Think hard about a 6 arc or Grendel. 308 is really not very good at all, and unless you have heavy logistics in your favor, it honestly doesn't make much sense. That said, I have an aero m5 308, but don't think highly enough of the platform to spend for the premium players.
2.) If you want to suppress it without any screwing around (and judging by this post OP fits that profile) get an extremely low back pressure can. Pewscience can quantify that, but good options would be a vented cgs Helios, oss/huxwrx or sandman K.
Last edited:
Depending on what $$ you can find one for, the SP10 is where I'd start.
My AR-10 is a real one, an Armalite target model. I like everything about it except for carrying it.
With a mounted scope and full 10 rd magazine it weighs 12 lbs.
One consideration of an Armalite rifle is the magazine situation.
They make an A and a B model that take different mags.
The B uses the gen 2 armalite mags, while the A uses the DPMS/pmag mags.
Both are readilly available.
With a mounted scope and full 10 rd magazine it weighs 12 lbs.
One consideration of an Armalite rifle is the magazine situation.
They make an A and a B model that take different mags.
The B uses the gen 2 armalite mags, while the A uses the DPMS/pmag mags.
Both are readilly available.
JMHO - The Zbroyar 7.62x51mm Z-10 rifles are proving themselves with the events in the Ukraine. That is why there is some renewed interest in the platform. Not hearing a lot about .223's or 6.5's..... Who knows when the money stops flowing we may be hearing about crossbow's.
Armalite is good to go, the new company doesn't impress but the years of refinements of the rifle is in the current product. Also under normal circumstances you can buy spare parts for Armalites. Not so with some of the brands being recommended. It may or may not be an issue for you but if you shoot it enough you will need a couple of critical spares.
Last edited:
There are two types of guns in this world — KAC, and everyone who wants to be KAC.
Oh… and MOA assures victory against Communist invaders. Using MILs is basically unconditional surrender.
And Chili doesn’t have beans, unless you’re a Commie.
Oh… and MOA assures victory against Communist invaders. Using MILs is basically unconditional surrender.
And Chili doesn’t have beans, unless you’re a Commie.
you won't beat the aero for the money and you'll have more standardization across things you may decide you want to add or change.
FYIFind an Aero already built in the PX if you can. It’s probably bang for buck budget AR10. Large frame ARs can have a lot of compatibility issues that translate into functional issues. There’s plenty of threads on here discussing folks woes. Save yourself the trouble.
Here’s a possible start if you can’t find a complete build.
Firearms - WTS - New Aero M5E1 receiver set
All pieces are new and have only been unboxed for pics/example. AERO M5E1 upper with built in TBAR handguard mount. AERO M5 lower. Comes with trigger pins, takedown pins and wilson combat bolt catch SGT of ARMS 17" ARCA handguard is $220 shipped if interested. $310 Shipped/Insured
I questioned Aero about "matched" upper and lowers. They replied:
| |
| Hello, Hobo Hilton. We unfortunately do not offer matched sets, just lowers and uppers paired as a bundle. They are not paired for fitment. Best Regards, Davin O Support team, Aero Precision |
you don't need a matched set. just buy, slap together and go at itFYI
I questioned Aero about "matched" upper and lowers. They replied:
Hello, Hobo Hilton.
We unfortunately do not offer matched sets, just lowers and uppers paired as a bundle. They are not paired for fitment.
Best Regards,
Davin O
Support team,
Aero Precision
Yeah, don’t need a matched set just all the other parts are important as some combinations work and some are headachesFYI
I questioned Aero about "matched" upper and lowers. They replied:
Hello, Hobo Hilton.
We unfortunately do not offer matched sets, just lowers and uppers paired as a bundle. They are not paired for fitment.
Best Regards,
Davin O
Support team,
Aero Precision
I just put a aero set together and so far it is shooting really. 18” SS barrel handloads shooting about 1/2” at 100. 168/178eldms. Running suppressed with an AGB from aero as well. Go on aero use their 10%off offer get an upper and lower. Go to schulyer and buy the supporting parts. Bcg agb charging handle mags. I did that and it was pretty cheap. Obviously kac seekins pws etc are probably one and done.
If going suppressed, consider the PWS MK220. I have the MK216 (16 vs 20 inch), and it shoots like a dream suppressed. Very accurate as well. Adjustable gas system, long strike piston. Nothing to mess with, but turning a knob. Almost as accurate as my 20 inch LMT MWS.
My Aero works as it well as to be expected although in 6.5 CM, I know the OP is going .308. The only issue was suppressed with can I built was ejection pattern. And the bolt not locking back which I found was a buffer spring/bolt thing. No problem with 1k yard with a 4-14x50 NF SHV. And the weight.
I appreciate the opinions from above.
Help bracket me in:
Recommend a stripped, matched upper and lower... At any cost.
Recommend a stripped, unmatched upper and lower (both from the same manufacturer) that might work together..... On a tight budget.
Thanks
Help bracket me in:
Recommend a stripped, matched upper and lower... At any cost.
Recommend a stripped, unmatched upper and lower (both from the same manufacturer) that might work together..... On a tight budget.
Thanks
First off, Budget and accurate are on opposite ends of the scales.Reality check.
Budget means compromise and lack of precision in some places and ways.
Consistently accurate means NO compromise.
I used to shoot, a LOT. I shot for the Spooks. If you know who they are, then you just know.
Now I just shoot Coyotes. And they hate me.
I'm a machinist/gunsmith and I don't post a lot. This is what I've settled on for semis............
My "low-end" accurate 308 is an highly accurized M1-A1 (M-14 fiberglass stock, Winchester barrel, welded rod, tuned trigger, the whole bit). Fairly light, good for 1.5-2.0 MOA. Federal 168 match. Good enough for a daily carry. Shoots anything you put in it.
I've got maybe 3k in that gun and scope. It's my first-grab because it just feels right on my shoulder and the scope is a old Swarovski fixed 10 power sniper retical. Clear as Montana air. Just a badass old school rifle.
The kind'a "bucks up" next-step is a Armalite AR-10T with a 5r barrel. Not light. sub MOA with 175 Federals.
I've got a Mk4 on there so that one knocks on the door of about 6k. I should sell it, I NEVER shoot it.
The MOST accurate 308 semi I have is a SCAR 20. I seems to not care what it shoots as long as it's match.
Now that one is pushing 8K with the Mk8 and the SPUHR mount. It's sub MOA even if my mom is shooting it (this thread is sketchy, Lol)
and doing the right thing. Little brother to the Ballista.
If you are shooting suppressed, get an adjustable gas block. The end. And a gunsmith on speed dial.
If you can't afford the racing gas, don't buy a HellCat.
The more you spend, the better it'll work (unless you're getting took).
I see a LOT off guys on here arguing about semi's not being more accurate than less than 1 MOA.
Bullshit.
You aren't holding the gun right! My S/F sniper buddies will tell you that.
We bang plates at 600M with his SCAR all afternoon. Passed that 6-800M thing, get a bolt gun.
With some horsepower.
Budget means compromise and lack of precision in some places and ways.
Consistently accurate means NO compromise.
I used to shoot, a LOT. I shot for the Spooks. If you know who they are, then you just know.
Now I just shoot Coyotes. And they hate me.
I'm a machinist/gunsmith and I don't post a lot. This is what I've settled on for semis............
My "low-end" accurate 308 is an highly accurized M1-A1 (M-14 fiberglass stock, Winchester barrel, welded rod, tuned trigger, the whole bit). Fairly light, good for 1.5-2.0 MOA. Federal 168 match. Good enough for a daily carry. Shoots anything you put in it.
I've got maybe 3k in that gun and scope. It's my first-grab because it just feels right on my shoulder and the scope is a old Swarovski fixed 10 power sniper retical. Clear as Montana air. Just a badass old school rifle.
The kind'a "bucks up" next-step is a Armalite AR-10T with a 5r barrel. Not light. sub MOA with 175 Federals.
I've got a Mk4 on there so that one knocks on the door of about 6k. I should sell it, I NEVER shoot it.
The MOST accurate 308 semi I have is a SCAR 20. I seems to not care what it shoots as long as it's match.
Now that one is pushing 8K with the Mk8 and the SPUHR mount. It's sub MOA even if my mom is shooting it (this thread is sketchy, Lol)
and doing the right thing. Little brother to the Ballista.
If you are shooting suppressed, get an adjustable gas block. The end. And a gunsmith on speed dial.
If you can't afford the racing gas, don't buy a HellCat.
The more you spend, the better it'll work (unless you're getting took).
I see a LOT off guys on here arguing about semi's not being more accurate than less than 1 MOA.
Bullshit.
You aren't holding the gun right! My S/F sniper buddies will tell you that.
We bang plates at 600M with his SCAR all afternoon. Passed that 6-800M thing, get a bolt gun.
With some horsepower.
We always shoot suppressed with the yote hunting. It's about all we do on the farm. It's full time. We shoot suppressed cause we "can't wake the chickens" and the muzzle blast blooms the NOGs.
Some cans are a problem, constantly loosening and the guys shooting the front cap to bits or 5th and 6th baffle strikes. Mostly the non-commercial cans (solvent trap types) and direct thread. That directs a fair amount of business my way.
The mount is critical. Our can bores are tight for sound suppression, there are no SureFires out there.
The can has to be mounted right and concentric to the bore ALWAYS as the pressure goes up. Lot of
force out there from 25+ grains of propellent and up. We shoot Hornady Predator and that gas is moving on
with a short barrel. All my can guts are 17-4 so they are tough. no problems. Heat expansion is uniform down the whole can.
I mounted my can to the barrel in a lathe. Run-out was .05". That actually makes the rifle more accurate and it acts like a 16"
barrel when I've chronograph'd the pills. They're still moving close to 2,700 fps.
I do a CherryBomb on a 10.5" Ballistic Advantage .308 and have NO issues. Other guys, not-so-much.
We shoot so many yotes there is a Coyote skull on every fence post at the neighbor's cattle pasture.
It pretty weird, but that isn't on my property, not my call.
Some cans are a problem, constantly loosening and the guys shooting the front cap to bits or 5th and 6th baffle strikes. Mostly the non-commercial cans (solvent trap types) and direct thread. That directs a fair amount of business my way.
The mount is critical. Our can bores are tight for sound suppression, there are no SureFires out there.
The can has to be mounted right and concentric to the bore ALWAYS as the pressure goes up. Lot of
force out there from 25+ grains of propellent and up. We shoot Hornady Predator and that gas is moving on
with a short barrel. All my can guts are 17-4 so they are tough. no problems. Heat expansion is uniform down the whole can.
I mounted my can to the barrel in a lathe. Run-out was .05". That actually makes the rifle more accurate and it acts like a 16"
barrel when I've chronograph'd the pills. They're still moving close to 2,700 fps.
I do a CherryBomb on a 10.5" Ballistic Advantage .308 and have NO issues. Other guys, not-so-much.
We shoot so many yotes there is a Coyote skull on every fence post at the neighbor's cattle pasture.
It pretty weird, but that isn't on my property, not my call.
Seldom do I find a man who is reading the same play book that I am reading.
LRB has built my M1-A1's
Just had cataract surgery and waiting on my prescription glasses... Yep, still need the readers.
Just looking ahead a bit to see what some options are if my current weapons don't fit the situation.
The only SCAR I have been around was with a guy in a class and he had problems with it. May have just been him.. IDK
thanks for the run down.
Hobo
I always find myself going back to that M1-A1. It's such a brutally
truthful rifle. No tricks, no fancy alloys to work harden and snap.
Just tool steel and honesty. As strong as the day is long. The scope is the same way, simple as a rock.
I'm in my 60's and it can just outshoot me any day it feels like it.
But when I was a younger man...........we were hell with the roof off.
I've had it 40 years. It's a member of my family.
I DID have to find out what the fuss was about with FN. Fantastic weapons they are.
Barrels are incredible. Takes some getting used to.
Now, that damn Ballista..................
An amigo has over 80k thru his FN M4. Throat's a little shot out, gas port is eroding away.
Still holds groups. Never hiccups, just goes bang when he pulls the trigger. He's a DM so they just give him that
HK-417 to "get tight". And it does.
truthful rifle. No tricks, no fancy alloys to work harden and snap.
Just tool steel and honesty. As strong as the day is long. The scope is the same way, simple as a rock.
I'm in my 60's and it can just outshoot me any day it feels like it.
But when I was a younger man...........we were hell with the roof off.
I've had it 40 years. It's a member of my family.
I DID have to find out what the fuss was about with FN. Fantastic weapons they are.
Barrels are incredible. Takes some getting used to.
Now, that damn Ballista..................
An amigo has over 80k thru his FN M4. Throat's a little shot out, gas port is eroding away.
Still holds groups. Never hiccups, just goes bang when he pulls the trigger. He's a DM so they just give him that
HK-417 to "get tight". And it does.
Enjoy that good eyesight as long as you can....
It's just hell to get old...
Don't believe what the Doctors tell you.
cheap doesn't mean bad and expensive doesn't mean good
buy accordingly
buy accordingly
Naw, that's his issue weapon. They keep a tight account of the rounds they issue.
And they have to shoot ALL of them.
He's the squad Designated Marksman in the 82nd. He has eyes like an eagle.
I've seen his targets. 10 rd groups with like only 5 holes..........in a very small circle.
Shooting prone of course.
Having been in the Marines I can tell you they don't keep as tight a count as some people think. Lots of extra rounds floating around after an exercise. I had a buddy that was a Company Gunny and he had a conex box full of assorted rounds for when the CO decided they were going to the field late on a Friday and the Ammo Supply Point was already closed.
I would also venture that his rifle doesn't have 80K rounds through it in its original form. Barrel, BCG, etc have been replaced at the least.
Similar to someone having their daddy's old axe...had the handle replaced 3 times and the head once...but it's their dad's axe.
Last edited:
no one, no one that's ever got any time behind the trigger is going to buy this round count and all that is said. I'm sorry but it's not even remotely possible. that doesn't even account for the mandatory parts replacement at specified intervals. major bs
