Best Muzzle Brake for the money

[mwiggi]

What would be the best muzzle brake for the money for a Tikka T3X 308? I’m leaning towards an Area 419 SideWinder.

I don’t mind spending extra money for a better brake, but is there that much difference between a $50 brake and a $200 brake in terms of recoil reduction/muzzle rise? I’ll be using the gun to hunt and shoot around 600 yards.

I’ve had great results with a DPMS Miculek brake, but I can’t seem to find one. Plus others have told me to spend more on a brake.

 

[texan79423]

I'm watching here as well

 

[theLBC]

from everything i have read, all but the worst perform similarly and some do work slightly better than average.
this is for a .308, but the surefire procomp ended up being the best value for recoil reduction.

.30 Caliber Muzzle Brake Shootout - The Truth About Guns

&#9664Previous Post Next Post▶ In response to popular demand, we’ve scaled it up a notch and have taken the 5.56 muzzle brake testing to 7.62. Specifically, 24 muzzle devices threaded 5/8-24 for use with .30 caliber cartridges joined in the fun, all of them getting tested for recoil reduction...

www.thetruthaboutguns.com

 

[DangerRanger]

I just bought a “beast“ from muzzle brakes and more, their YouTube videos comparing brakes on a recoil sled are impressive and all the reviews or notes I can find on them online speak highly of them. Plus, they are unexpectedly affordable.

 

[Steel head]

I’d get the hellfire or Heathen over the sidewinder on a 308.

 

[Wheres-Waldo]

In my opinion, the $200 comes in when you take it off every few hundred rounds to clean and it actually goes back on like it should.

Buy a nice, quality APA, 419 or similar brake and it’s one less thing to worry about.

 

[mwiggi]

I’ll check into the other brakes by area 419 and the beast.

As long as it’s self timing then shouldn’t it clean easily?

 

[Steel head]

You can’t beat the performance of a 4 port beast for the cost.

Muzzle Brakes and More

muzzlebrakesandmore.com

Effective brakes but on a well set up rifle all that downward bias causes issues.

 

[Prebanpaul]

For the price. Muzzle breaks and more. I run TBAC, area 419 and muzzle breaks and more. Cost vs performance. Muzzle breaks and more is by far the best.

 

[BCX]

Not cheap but ck out Terminator brakes. Probably the most effective brake out there.

 

[b6graham]

from everything i have read, all but the worst perform similarly and some do work slightly better than average.
this is for a .308, but the surefire procomp ended up being the best value for recoil reduction.

.30 Caliber Muzzle Brake Shootout - The Truth About Guns

&#9664Previous Post Next Post▶ In response to popular demand, we’ve scaled it up a notch and have taken the 5.56 muzzle brake testing to 7.62. Specifically, 24 muzzle devices threaded 5/8-24 for use with .30 caliber cartridges joined in the fun, all of them getting tested for recoil reduction...

www.thetruthaboutguns.com

please never ever use this or any other similar test that's 5 years old and look at AR brakes

this entire link is legit trash

 

[b6graham]

i like my sidewinder and heathen. different rifles though.

hellfire is fine too

have an unfired Hawkins Tank ST in 30 cal just don't have any non massive barrels to put it on so ill probably get rid of it before trying it out

 

[Steel head]

please never ever use this or any other similar test that's 5 years old and look at AR brakes

this entire link is legit trash

I concur

 

[theLBC]

I concur

sorry, i just meant to convey that unless designed very poorly, brakes tend to perform similarly.

 

[Raufoss]

APA Fat bastard gen III . No competition

 

[delfuego]

Piercision Muscle Brake (self-timed) is about the nicest brake you will ever find. APA little Bastard fat Bastard is never a bad option and fun to say.

 

[jmikell870]

Stainless Steel Radial Brakes

Radial Ported Muzzle Brakes

harrellsprec.com

I just got one in the mail today. Absolutely great quality, no fill, as advertised.
The tactical brake (as seen in the picture) have flat ports (no reverse ports), but they are angled slightly upward to drive some of the blast upward, this pushing down on the muzzle.

 

[Steel head]

So on a heavier comp rifle they have too much downward pressure? I’ve only shot them on lighter hunting rifles where that’s super desirable.

On a hunting rifle I think they’re awesome.
Recoil reduction is great with high bore center rifles.

On a rifle that already doesn’t have muzzle (or very little) rise it pushes it hard downward and I gut a bunch of weird flutter on recoil.
Put a Heathen with no vertical bias on that rifle and it literally doesn’t move left, right, up or down at all on recoil if you have a good position.
It absolutely shot nicer afterwards.

 

[jmikell870]

So on a heavier comp rifle they have too much downward pressure? I’ve only shot them on lighter hunting rifles where that’s super desirable.

A lot major brand muzzle brakes offers some form of downward pressure. Gen 3 APAs, area 419s, tubb 5 star, Harrells, MBM, etc. Also, I haven't seen any test showing downward pressure having a negative effect on accuracy. But, I have seen test showing a positive effect for staying on target. This benefit is even more pronounced during positional shooting.

 

[XLR308]

I run very few muzzle brakes but the one I have been the most impressed with so far has been the Area 419 Hellfire.
Not an expert when it comes to brakes by far but it is a very effective brake for both recoil reduction and spotting hits beyond 1000 yards and in my opinion felt percussion to the shooter.

 

[Jigstick]

A VIAS hands down will reduce recoil the most but they are obnoxiously loud and have Ports 360*. I use one on my 300wm and it’s as soft as my 6.5x47

I have a harrels on my 300wsm and it’s a puppy dog now. Gun only weighs 8lbs too.

 

[seanh]

Do you have any plans to put on a suppressor? If so I would go with one that is more geared to common suppressor mountings.

 

[Jscb1b]

I've got 3 from Witt machine. I like them.

 

[XLR308]

Do you have any plans to put on a suppressor? If so I would go with one that is more geared to common suppressor mountings.

That's a good point and one of the reasons I tried the Hellfire initially.
They are easily adaptable to suppressor use and simple to take on and off for cleaning or mounting a suppressor so long as your not to ham fisted with them.
The first time I installed mine I had issues removing it due to being a little heavy handed when installed.
It's a fine pitch left hand thread that locks up on a taper so some finess is recomended for you fellow gorillas.

 

[NewsShooter]

Muzzle brakes and more are the best for the cost. That being said I have three hellfires. Easy to put on and remove for cleaning.

 

[Rob01]

Patriot Valley Arms Jet4 and Jet Blast work great. Sends blast more away from shooter which is nice. Easy to put on and take off when needed. Not overly expensive.

Muzzle Brakes

patriotvalleyarms.com

 

[b6graham]

Patriot Valley Arms Jet4 and Jet Blast work great. Sends blast more away from shooter which is nice. Easy to put on and take off when needed. Not overly expensive.

Muzzle Brakes

patriotvalleyarms.com

wish he would make one with a 1.25/1.35" OD

 

[tydex21]

Another vote for muzzle brakes and more. I’ve used them on several different calibers and have had no issues with downward bias. Scott Weichel from live oak precision (maybe accuracy?) also makes an awesome brake, but I’ve had to soak that one a little longer when cleaning. I also have an MPA brake and that thing is a monster. It probably has the most recoil reduction, but I can only tell a difference on magnum calibers. I think the other two look better though.

Edit: It’s live oak accuracy. It looks like he now has various diameter as well. Good luck!

 

[260284]

You can’t beat the performance of a 4 port beast for the cost.

Muzzle Brakes and More

muzzlebrakesandmore.com

My son has a 2 piece MBM Beast and it does reduce recoil a lot, but I feel the blast from it while shooting the rifle. I have a 6mm and a 6.5 Hellfire, but a friend switched from the APA to the Tierney Arms Ghille and the recoil reduction and lack of blast at the shooter is impressive. If I were buying a brake right now, that is where I would go.

Ghille Brake | Tierney Arms Company

The Tierney Arms Company Ghille Muzzle Brake was designed using the latest state of the art C.A.D. software along with real world testing to ensure maximum recoil reduction. It features high efficiency variable geometry porting that is biased to rear and slightly up, minimizing felt recoil and...

www.precisionrifleparts.org

 

[Mopar man]

beast break makes my 300 win mag feel like a 243

 

[jb0311]

I run area 419 and have both hellfire and sidewinders. I feel the sidewinder’s beefiness will outweigh the minimal increase in recoil reduction on a .308. They are designed for magnum calibers and though both will work, A hellfire will do just as well, be smaller, and about $20 cheaper if I remember correctly. I can PM you a side by side picture of the two for comparison if you wish.

 

[Prebanpaul]

beast break makes my 300 win mag feel like a 243

Litteral 100% correct. It’s insane.

 

[Krob95]

FWIW I run an Impact Precision brake and while I only have sent 15rds through it so far, I like it and feel it mitigates what little recoil a 6BR has effectively. When my TBAC ultra 9 gets outta jail I’ll probably opt for their brake as it’s currently stuck in my can with no signs of coming out with out taking it to the boys at MHSA (the “gunsmith” that put it on swears it was set with rocksett but I mounted the can, took it back off before firing, and off came the brake too)

 

[tscoz]

Take a look at the Axis Precision Worx Raptor. They just started being imported from South Africa. I have one on backorder since the initial shipment sold out pretty fast. I don’t have a relationship with APW but I’ve seen their MB in action in some videos (Impact Shooting) and it’s pretty amazing how little the gun moves. I just haven’t seen enough difference in the popular brands to convince me to buy one so I’m taking a shot on this one.

Raptor Muzzle Brake - 5 Port | IMPACT PROSHOP USA

Introducing the Raptor 5 port brake from Axis Precision Worx, the best looking brake in the business, proudly manufactured in South Africa and now offered in the USA. The Raptor Muzzle Brake features a Self-Timing toolless system for ease of use and ultra-fast mounting. APW has taken the...

www.impactproshopusa.net

 

[338dude]

What would be the best muzzle brake for the money for a Tikka T3X 308? I’m leaning towards an Area 419 SideWinder.

I don’t mind spending extra money for a better brake, but is there that much difference between a $50 brake and a $200 brake in terms of recoil reduction/muzzle rise? I’ll be using the gun to hunt and shoot around 600 yards.

I’ve had great results with a DPMS Miculek brake, but I can’t seem to find one. Plus others have told me to spend more on a brake.

Check out American precision arms they have a good line of brakes I like the GEN two S. timing ones also terminator is a very good break as well

 

[littlepod]

Is there a good article on how much blast back to the shooter is felt too? I want a brake that would minimize recoil but also not give me a headache after shooting 100 rounds.

 

[JC0352]

FWIW I’ve noticed less perceived blast to the face with a Hellfire than with a Gen 2 Little Bastard. Both helped with recoil about the same. Those are the only two I’ve used personally.

 

[littlepod]

I switched from the Hellfire over to https://straightjacketarmory.com/product/gen2-shot-caller-self-timing/. I think the hellfire did a little better with recoil, but I much appreciated having almost no blast at the shooter from the shot caller brake.

 

[Baron23]

Piercision Muscle Brake (self-timed) is about the nicest brake you will ever find. APA little Bastard fat Bastard is never a bad option and fun to say.

I have a Piercision on a 6.5 CM in a J Allen chassis and as far as I can tell, it does its job very finely.

Stainless Steel Radial Brakes

Radial Ported Muzzle Brakes

harrellsprec.com

I just got one in the mail today. Absolutely great quality, no fill, as advertised.
The tactical brake (as seen in the picture) have flat ports (no reverse ports), but they are angled slightly upward to drive some of the blast upward, this pushing down on the muzzle.

And I have a Harrels brake on my .308 deer gun. Not expensive and it also seems to do its job. The one I have is not self-timing and I had it turned down to match contour and cerekote it. I'm very happy and glad to not have spent more money.

Cheers

 

[ballisticdaddy]

Just picked one of these up from Kelblys and love the thing, lighter and better recoil management than my lil bastards

 

[308guru]

I use a Precision Armament M11 on my 308 and it does a great job of taming recoil and jump. Of course the guy on either side of me is not a fan.....

I used their Accu-washers to time it during install. Slick system.

Check out the M11. It gets great reviews and does very well in comparisons.

 

[KJG67]

I have a T3 CTR and a Gen 3 Little Bastard - works great.

 

[Southern Custom]

If it will fit your barrel, look up the Ultradyne Apollo S. Self timing. Very little rearward blast. Barely louder than no brake and cut recoil in half on my 6mm. Made a soft shooter into a super soft shooter. I’ll be putting one on my sons gun now.

 

[Renomd]

Just picked one of these up from Kelblys and love the thing, lighter and better recoil management than my lil bastards

View attachment 7386732

How did these compare in regards to concussion and blast for you on the shooter end vs. the lil bastards? They are incredibly affordable....so my interest is peaked but man there's not much in the way of info on these

 

[PAYDIRT]

It's not in the clique here but I recently got a Scott Weichel brake and I'm very happy with it. The locking system is super slick and Scott is a fantastic guy to do business with too.

 

[tydex21]

It's not in the clique here but I recently got a Scott Weichel brake and I'm very happy with it. The locking system is super slick and Scott is a fantastic guy to do business with too.

Yup. Love mine and mentioned it earlier as well. They look so damn good too!!

 

[hic28]

47 replies and no one has referenced the best test done?

Muzzle Brake: Summary of Field Test Results

This post summarizes the eye-opening results for the massive muzzle brake field test I’ve worked on ...

precisionrifleblog.com

it’s a few years old but the data is excellent. That being said. APA are, in my opinion, the best. I’ve tried just about everything and don’t even bother with others now.

 

[secm]

What would be the best muzzle brake for the money for a Tikka T3X 308? I’m leaning towards an Area 419 SideWinder.

I don’t mind spending extra money for a better brake, but is there that much difference between a $50 brake and a $200 brake in terms of recoil reduction/muzzle rise? I’ll be using the gun to hunt and shoot around 600 yards.

I’ve had great results with a DPMS Miculek brake, but I can’t seem to find one. Plus others have told me to spend more on a brake.

I have the same rifle and use the "Little Bastard gen II I purchased from Eurooptics.com one of the best I have tried and reasonably priced.

 

[Aqua Mark]

McRee, Precision Armament, or Little Bastard for regular brakes, and the one Spartan Rifles sells for self timing brakes all work well.

 

[Qazwsx]

MBM Beast 4 port