Bix n Andy Tacsport pro x loose fit?

[Tyler6593]

Hey fellas,
So I have always run Triggertech which have been fine. I thought I’d try a bix so I bought a Tacsport pro x from Altus. After installing it with both pins the trigger could freely move around in the action. Lots of side to side play and some up and down. With diamonds I experience this until you punch in the rear pin, it is then held tight in place. I have reached out to Altus but thought I’d post here and see if anyone else has experienced this.

 

[Tyler6593]

Looks like it was some out of spec trigger pins. Strange how the pins would hold a diamond tight but the bix. Anyways, thanks.