Accessories Bog Deathgrip Tripod Ball Head Kit

[Lycan66]

Are you still selling these? I would love to grab a full kit.

 

[DedDucks]

Pm sent for full kit

 

[Mkka]

PM sent for kit

 

[craicshooter]

How do I get the full kit and the eye bolt?

 

[OrHunter]

Received my kit and I’m super happy. Great setup.

 

[Millingolfing]

I’d like to take a full kit. PM has been sent. Let me know payment options.

 

[Mikethemooch]

Pm sent for the bushing and adapter kit with eyelet.

 

[RobD]

Would like to order a full kit please. Thanks, Rob.

 

[endlessmtnsman]

I will take one Ball head kit and adapter plate

 

[donnieh]

I'd like to purchase the full ballhead kit with the eyeboltNeed info where to send payment.

 

[endlessmtnsman]

Received my kit and I’m super happy. Great setup.

How did you get your kit...I have not found the link to purchase the entire kit...

 

[Mbvanstory]

I’ll take a full kit. Sending pm

 

[Dooly1004]

Not sure if pm went through . OP . Can you check pls ? Thanks

 

[OkieLR]

Sent you a PM for the full kit. Thanks!

 

[endlessmtnsman]

Sent you a PM for the full kit. Thanks!

I am confused !! I am not the man who is making the devices and selling them. what is a PM?...def. of payment?

 

[OkieLR]

I am confused !! I am not the man who is making the devices and selling them. what is a PM?...def. of payment?

Hey man go to the first post in this thread and send the original poster a private message or PM. They’ll get back with you and let you know how to buy a kit.

 

[endlessmtnsman]

Hey man go to the first post in this thread and send the original poster a private message or PM. They’ll get back with you and let you know how to buy a kit.

done !

 

[Cheecho]

OK, ordered full kit and install was as easy as advertised. Was still using the saddle and finally ordered some M-lok plates. So much better, highly recommend to anyone wanting easy upgrade.

 

[IdahoSteve]

I would like to purchase a full kit. Please pm me with details re payment.
Thanks Steve

 

[Dooly1004]

Loving the kit . Thank you OP ! Turn around time was fast considering the order volume . Good communication ! No more fidgeting trying to moving coyote . Can't wait to test it out

 

[Xtremist]

do you have current stock on the full kit ? turn around time to alberta ?

 

[Highbrass]

This is the way !
If you own a BOG this is an upgrade worth having.

 

[Jackjam]

Does this work on the infinite series of tripods?

 

[sworcery]

PM Sent about full kit

 

[fsrangerregiment1]

P.m. sent in regard to purchasing fall kit. I hope that message went through

 

[MrChief117]

PM sent for full kit. Thank you!

 

[SDvaquero]

PM sent to purchase the full kit. Thanks!

 

[ExclusiveArmsMike]

Id like to purchAse a full kit. Please PM or text 201.600.1558. Thx

 

[KARL HARRIS]

I would like the full kit..
Could you send a pm with payment info?

Hi could I order a bush and plate please I’m in the UK ..? My email :- [email protected]

 

[TargtSh00ter]

Does this work on the infinite series of tripods?

I have the same question.

 

[KARL HARRIS]

Received my kit today in the UK SUPER IMPRESSED In the service and posting service

Thank you

 

[JSHuffman]

Don’t know how send PM. I’d like to purchase whole kit.
740-236-7061

 

[STI_1911_Guy]

Does this work on the infinite series of tripods?

I will look into this question and see if it will. Doesn't the infinite Bog's come with a ballhead already or no?

 

[Jackjam]

I will look into this question and see if it will. Doesn't the infinite Bog's come with a ballhead already or no?

It does have a ball head but it doesn’t have the separate pan feature which I think would be worth the upgrade.

 

[STI_1911_Guy]

It does have a ball head but it doesn’t have the separate pan feature which I think would be worth the upgrade.

Got ya. Thanks for clarifying for me.

 

[STI_1911_Guy]

All orders are caught up and shipped out as of today! Thanks.

 

[Deerefever81]

Would like to buy the entire ball mount kit for the death grip Tri pod. I’m new here but seen some of the posts about it.

 

[STI_1911_Guy]

Would like to buy the entire ball mount kit for the death grip Tri pod. I’m new here but seen some of the posts about it.

I sent you a PM. Please let me know if you are not interested.

 

[Darth_kopp]

Interested in the Bog Deathgrip Bushing, Bolt and Adapter Plate Only.

 

[STI_1911_Guy]

Interested in the Bog Deathgrip Bushing, Bolt and Adapter Plate Only.

Sent you a PM. Thanks.

 

[PhilD]

I’d like the full kit with eye bolt.

 

[STI_1911_Guy]

I’d like the full kit with eye bolt.

PM sent with ordering details.

 

[Roy Lynn]

I'd like a full kit with eyebolt. I also sent a PM with comments. Thx
rl

 

[xaceofspades999x]

I’d like to get a full kit with eyebolt. PM sent.

 

[STI_1911_Guy]

PM's answered. Will have the next batch going out next week!!

 

[steve8140]

Got the full kit delivered and installed today. Definitely a great improvement for the BOG series tripods.

 

[Steven Nick]

PM sent

 

[acts238]

****UPDATE***

****I have been working on a printed bushing to replace the aluminum one for a few reasons. Main one being availability, I can print these like any of my other items so sourcing is not an issue. I can also pass the cost savings on to you guys and a little more weight reduction. I will be working on a printed adapter plate in the future also. I wanted to make sure the integrity and strength were both still very sound so I adjusted materials and design until I got it right. ***** There will be nothing new to installation, a dab of Loctite is still highly recommended on the ball head bolt. Just snug it up good, no need to over tighten. There are some variances in the BOG castings so you may hear a slight pop as the lip in the bushing pops over the casting but its fine and expected on some as I keep the fit fairly snug on the bushing.

I have also added an eyebolt addition you can use to hang equipment from. When you purchase it just let me know if you want the eye bolt or regular bolt.

For installation of the eyebolt you will install the bushing then slide the eye bolt up through and tighten fully into the ball head until it bottoms out. Then loosen the eye bolt 1 full turn and lock the nut down while holding the eye bolt from turning if necessary.



I have made up a few ball head conversion kits for the Bog Deathgrip Tripod. I tried to keep the price down as low as possible while maintaining good quality equivalent to the Bog Tripod.

- Prices shipped TYD.
- *** Continually making them as requested. I will inform you of any excessive backlog.
- There are 5 options.

The ball head is rated at 33 lbs and has 360 degree rotation (lockable) base in addition to the ball head and the ball head is lockable and adjustable for tension. This will accept arca-swiss style devices including the numerous picatinny to arca and such items on the market.

To install you would have to remove the one bolt holding the deathgrip to the tripod. Once you do this the bearings and bushings (you will not need these any longer) will come out. You will end up with a hollow casting as seen in the images. Once you have this you can insert the aluminum bushing from the bottom, then insert the new bolt through the bushing and install the ball head onto it. I recommend a dab of Loctite on the bolt before installation.

If you want to use the deathgrip that you just removed you need the kit with the adapter plate. This plate with the 4 supplied screws will attach to the deathgrip head and can then be locked into the arca-swiss ball head.

This entire assembly weighs ~15oz, you will be removing ~8oz to install. So in total you will add about 8 oz to your setup, plus any additional items you decide to add.

Bog Deathgrip Tripod Ball head kit and adapter plate (full kit) $110: This will come with the ball head, bushing and 3/8-16 bolt to attach the ball head. In addition this will come with the adapter plate to attach to the deathgrip that can then be placed into the arca-swiss ball head.
Bog Deathgrip Tripod Ball head kit only $95: This will come with the ball head, bushing and 3/8-16 bolt to attach the ball head.
Bog Deathgrip Bushing, Bolt and Adapter Plate Only $55: This will come with the bushing for the tripod, The 3/8-16 bolt for most ballheads and the adapter plate to attach the deathgrip to Arca-Swiss. This is for if you have your own ballhead but want to be able to attach the deathgrip to it if desired.
Bog Deathgrip Adapter Plate and Screws Only $45: This will come with the adapter plate and 4 screws only.
Bog Deathgrip Bushing and Bolt Only $40: This will com with the bushing and bolt only. This option would be great for someone with their own ballhead and no desire to be able to reattach the deathgrip.


I also have small plates with the standard 1/4-20 screw. If you have any accessories that would benefit from a custom printed fixture that would allow you to attach it to an Arca-Swiss plate, which could then be put on a tripod or something else please send me a PM and we can figure something out.


Items other members have requested

Amp Annealer Bushing Die Holder And Organizer Case Length/Headspace Gauge Organizer Hornady Comparator Organizers Bullet Pullers Expanding Mandrel Organizer Trimmer Brass Catchers Giraud Trimmer Organizer Hornady OAL Organizer K&M Neck Turning Organizer Loading Trays Primer Tube Holders Shellholder Racks WFT Holder AR Upper Hanger Bog Deathgrip Tripod Ball head Area 419 Funnel Organizer Henderson Trimmer Organizer

the pics show a metal ball head- the post says 3d printed? are these metal or plastic? thanks

 

[STI_1911_Guy]

the pics show a metal ball head- the post says 3d printed? are these metal or plastic? thanks

The ballheads are metal its the insert that is printed. It was aluminum but It wasn't needed so I switched to my printed items and passed the cost savings along to you guys.

 

[Roy Lynn]

Got my full kit yesterday and installed it last night. I was impressed by the fast service, communication and quality of the kit for the money. Simple to install and bushing fit perfectly. Certainly improved the functionality and versatility of the BP.

I have not acid tested it yet by throwing it in back of the SxS or bed of pick up and headed to pasture and hunted with it yet, but based on what I've seen so far, I'm sure I'll be grinning.