G
Guest
Guest
Killshot44XGunny Sergeant
Rating: 3.4/5 this site
622 posts this site
Brass Cleaning and Annealing for Snipers Hide Members!
02/25/2015 Last edited 02/02/2016 by Killshot44
(2 votes)
(this thread was originally created and approved for posting by LowLight in June 2011 )
Would you like to clean your brass with Stainless Steel media and Machine-Anneal them, but can't justify the cost for the equipment? I know, $500 for an annealer and $250 for the SS setup will buy a lot of new brass.
I've been aiding SH members for several years and have serviced 100,000+ cases for 200+ members. This is not a business, I'm just a disabled shooter with time on my hands.
For just .10/case* I will decap your cases, clean them using stainless steel media and machine-anneal them using Bench-Source annealers.
For cases already decapped and SS cleaned, the cost for annealing is only .05/case.
* for .338Lapua and other calibers with caseheads larger than .532" the cost is .25/case.
I can do everything from .20Ruger to .375Magnums.
Whether you have range pick-up dregs or carefully neck-turned benchrest cases, I'll treat them as my own.
When to anneal is an often-asked question. Generally, cases shot from a factory-chambered barrel and re-sized using non-bushing dies will work-harden sooner than those fired from a gunsmith-chambered barrel and resized using bushing dies. If you're seeing a known-to-be-good load start to lose accuracy and it's not the round-count of the barrel, it is likely to be the brass.
24-72hr turnaround. No order too small or too big.
Brass will be shipped back via Priority Mail boxes which cost $6.80 for Small, $13.45 for Medium and $18.75 for Large. (prices updated 1/20/16)
Payment in Cash or Money Order can be sent with the brass. PayPal is also accepted, PayPal address is [email protected].
Please include something with your name, address and Hide screen name with your order.
Here's the Ship To address:
Bob Ariana
173 Doray Drive
Pleasant Hill, CA 94523
Be sure to tape the box thoroughly and cushion the cases with bubble-wrap or some padding, the Postal Gorillas are not gentle.
Please use a NEW box, used boxes often lead to crushed casemouths.
My sincere thanks to Frank/Lowlight for letting me put this out there to the Hide membership.
Please PM me with your questions and Good Shooting to all.
Turn your brass from this
To this
:
Thanks to everyone who has used my service, I enjoy helping others shoot better.
Rating: 3.4/5 this site
622 posts this site
Brass Cleaning and Annealing for Snipers Hide Members!
02/25/2015 Last edited 02/02/2016 by Killshot44
(2 votes)
(this thread was originally created and approved for posting by LowLight in June 2011 )
Would you like to clean your brass with Stainless Steel media and Machine-Anneal them, but can't justify the cost for the equipment? I know, $500 for an annealer and $250 for the SS setup will buy a lot of new brass.
I've been aiding SH members for several years and have serviced 100,000+ cases for 200+ members. This is not a business, I'm just a disabled shooter with time on my hands.
For just .10/case* I will decap your cases, clean them using stainless steel media and machine-anneal them using Bench-Source annealers.
For cases already decapped and SS cleaned, the cost for annealing is only .05/case.
* for .338Lapua and other calibers with caseheads larger than .532" the cost is .25/case.
I can do everything from .20Ruger to .375Magnums.
Whether you have range pick-up dregs or carefully neck-turned benchrest cases, I'll treat them as my own.
When to anneal is an often-asked question. Generally, cases shot from a factory-chambered barrel and re-sized using non-bushing dies will work-harden sooner than those fired from a gunsmith-chambered barrel and resized using bushing dies. If you're seeing a known-to-be-good load start to lose accuracy and it's not the round-count of the barrel, it is likely to be the brass.
24-72hr turnaround. No order too small or too big.
Brass will be shipped back via Priority Mail boxes which cost $6.80 for Small, $13.45 for Medium and $18.75 for Large. (prices updated 1/20/16)
Payment in Cash or Money Order can be sent with the brass. PayPal is also accepted, PayPal address is [email protected].
Please include something with your name, address and Hide screen name with your order.
Here's the Ship To address:
Bob Ariana
173 Doray Drive
Pleasant Hill, CA 94523
Be sure to tape the box thoroughly and cushion the cases with bubble-wrap or some padding, the Postal Gorillas are not gentle.
Please use a NEW box, used boxes often lead to crushed casemouths.
My sincere thanks to Frank/Lowlight for letting me put this out there to the Hide membership.
Please PM me with your questions and Good Shooting to all.
Turn your brass from this
To this
Thanks to everyone who has used my service, I enjoy helping others shoot better.
