Calipers
- Thread starter tinman52
- Start date
What’s the biggest caliber you will be using them on?
8” ones are perfect for everything up to 30-06.
Go to 12" ... I got tired of the shorter calipers hurting my hand. Since I got the 12" ... I haven't taken the 6" calipers out of the drawer. Save a few bucks and get this one ... it's awesome. Or spend more and get the same features.
Amazon product ASIN B000EJUBBU
Amazon product ASIN B000EJUBBU
Go with 8" if you can afford it $180 Mitutoyo. $120 for 6 in is a lot cheaper tho.
Its harder to make caliper measure as good with bigger opening. Hence high price.
As noted above, brand and size/ model are different topics of course.
Its harder to make caliper measure as good with bigger opening. Hence high price.
As noted above, brand and size/ model are different topics of course.
For comfort, standard long action calibers should be a minimum of 8” calipers for the body comparator, I don’t have a magnum long action, so a 12” maybe better idk. 6” works fine for short action but I prefer 8” anymore……I’ve got 8” for everything I have.
Also, I bought most of mine on eBay used……$250-$300 calipers for less than $115. Now you need to know that there are fake mitutoyos out there, do your research on fake vs real mitutoyos.
Also, I bought most of mine on eBay used……$250-$300 calipers for less than $115. Now you need to know that there are fake mitutoyos out there, do your research on fake vs real mitutoyos.
Because I can’t even handle the 6, I could barely stand 2Why settle for 8-inches ... when you could have 12?
Get the iGaging for $30. Actually get two. I did and it's so much easier not having to pull the comparator to measure OAL, etc.
Don't get stuck on the Mitutoyo brand.
Starrett are every bit as good as are Brown & Sharpe.
Might give you an option you didn't know existed.
Stay away from Scamazon....known fakes are all over that site.
Starrett are every bit as good as are Brown & Sharpe.
Might give you an option you didn't know existed.
Stay away from Scamazon....known fakes are all over that site.
US made Starrett products are quality tools and have drawers full of them. Their Chicom stuff is crap and wouldn't waste your money on it. Brown & Sharpe and Mitutoyo are also very well made tools. I have bought several off on eBay many being sold by retiring machinist/diemakers.
Ooh how I hated the igaging calipers I had!!!
Try this place to buy also. https://www.shars.com/products/measuring/caliper?max_measuring_range=8"
Try this place to buy also. https://www.shars.com/products/measuring/caliper?max_measuring_range=8"
Last edited:
This^^^just make sure they’re not knock offs!!
Most time when they have some sort of number or grind mark to get rid of a number on the jaw or on the back side somewhere, those are genuine because some machinist company or some company that had them.
6” or 8”. Do not mess with 12” unless you need to. Yes it will work, but will be bulkier with no benefit to you.
Use right tool for the job.
Use right tool for the job.
Zoro is a good source of products that are genuine with a chain of custody.
These can be had for around $150 if you shop around.
Mitutoyo 500-752-20, Digimatic Caliper, 0-6", IP67
These can be had for around $150 if you shop around.
Mitutoyo 500-752-20, Digimatic Caliper, 0-6", IP67
