Yet another question...I'm going down the rabbit hole as of late and would appreciate your perspectives.
I have two rifles and two scopes...and I'm weighing which scope makes the most sense for the rifles in question. Neither will be used for hunting. Both for shooting paper and steel. So here goes...
Rifle #1: LMT MWS, SSR-E trigger, 20" Stainless 6.5CM
-Gets 2592 fps with 147 ELD-M. Subsonic at about 1400 yards
-Historically a 1 MOA gun with the .308 barrel. Don't have enough time behind the 6.5CM to say, but certainly no worse.
-Used to wear an early USO 1.8-10x42 FFP Mil illuminated. Heavy, but low profile. Now mounted on a 20" M40ish .308 build but could always slap it back on and put the NXS on the M40 thing.
Rifle #2: Tikka T3X TACT A1, 24" Stainless .308
-No velocities recorded yet, but probably 2650 fps with 175 SMK. Subsonic at about 1025 yards.
-Printed a 5 shot .57" group with 168 SMK, but first and only time behind the rifle.
-First outing it wore a NXS 3.5-15x50.
Scope #1: Nightforce NXS 3.5-15x50, MOAR, SFP
Scope #2: Nightforce ATACR 5-25x56, MOAR, SFP
Given the effective ranges of the particular cartridges, the physical size/weight of the two platforms and the two scopes (to include height over rail), magnification range and any other variables I'm not considering...which scope would you mount to which rifle and why?
I have two rifles and two scopes...and I'm weighing which scope makes the most sense for the rifles in question. Neither will be used for hunting. Both for shooting paper and steel. So here goes...
Rifle #1: LMT MWS, SSR-E trigger, 20" Stainless 6.5CM
-Gets 2592 fps with 147 ELD-M. Subsonic at about 1400 yards
-Historically a 1 MOA gun with the .308 barrel. Don't have enough time behind the 6.5CM to say, but certainly no worse.
-Used to wear an early USO 1.8-10x42 FFP Mil illuminated. Heavy, but low profile. Now mounted on a 20" M40ish .308 build but could always slap it back on and put the NXS on the M40 thing.
Rifle #2: Tikka T3X TACT A1, 24" Stainless .308
-No velocities recorded yet, but probably 2650 fps with 175 SMK. Subsonic at about 1025 yards.
-Printed a 5 shot .57" group with 168 SMK, but first and only time behind the rifle.
-First outing it wore a NXS 3.5-15x50.
Scope #1: Nightforce NXS 3.5-15x50, MOAR, SFP
Scope #2: Nightforce ATACR 5-25x56, MOAR, SFP
Given the effective ranges of the particular cartridges, the physical size/weight of the two platforms and the two scopes (to include height over rail), magnification range and any other variables I'm not considering...which scope would you mount to which rifle and why?