Can't fit VTR 308 into AICS Chassis. Please help!

M

mako0321

Private
Minuteman
Jan 11, 2011
2
0
61
#1
I have an older Accuracy International Chassis for a Rem 308, I wanted to put a VTR 308 into the chassis, but it is hitting the safety on it. It has the X-Mark Pro trigger. Does this need to be modified somehow. I'm stumped please help.

Thanks Chad
 
#3
Re: Can't fit VTR 308 into AICS Chassis. Please help!

It's the X-Mark that's causing your issues I beleive, so you could either buy a different trigger or get out the Dremel tool and remove some material on the stock.
 
#4
Re: Can't fit VTR 308 into AICS Chassis. Please help!

You have two resolutions available.

Replace the trigger or relieve the stock.

If you decide to replace the trigger, make sure you get one with the safety, as the one on the x-mark doesn't come off easily.
 
#5
Re: Can't fit VTR 308 into AICS Chassis. Please help!

Yes, it will likely require some slight fitting to get that trigger in there. I would personally change over to an old style trigger/safety or a nice after market unit. I just don't care for the XM trigger.
 
#10
Re: Can't fit VTR 308 into AICS Chassis. Please help!

Same if you get a timney.

It's not uncommon to have to fit the area around the trigger components a bit.

Just because a company advertises that their chassis is "drop-in"... doesn't mean you can drop "everything" in.
wink.gif
 
You must log in or register to reply here.

Similar threads

MikeinNC
SOLD Accuracy International AICS AT-X R700 SA Short upper chassis with Hinge, $975
Replies
0
Views
257
MikeinNC
MikeinNC
A
SOLD WTS: AT-X AICS chassis w/ extras
Replies
1
Views
439
afd77
A
MxTexas
SOLD Accuracy International AT-X AICS Chassis for Rem 700 SA
Replies
5
Views
984
MxTexas
MxTexas
sneakypayload
Timney HIT issues
Replies
1
Views
370
2Twenty3
2Twenty3
YesLegs25
SOLD Accuracy International AI AXSR AICS SA Rem 700 Chassis (Black)
Replies
5
Views
685
YesLegs25
YesLegs25
Top Bottom
Back
Home
Forums
Merch
Alerts