CarbonSix Rifle Barrels (15% OFF SUMMER SALE)

[CarbonSix]

If you are waiting to snatch a CarbonSIx Barrel, now is the time! All of our barrels are 15% OFF with Code: SNIPER15

• 0.5 Minute Guaranteed
• Custom Made to Order

 

[FuhQ]

Do yall have any 7" twist .257 caliber barrels? Also any shorty (16-20") 8" twist 7mm barrels in stock?

 

[CarbonSix]

Do yall have any 7" twist .257 caliber barrels? Also any shorty (16-20") 8" twist 7mm barrels in stock?

Every barrel is made to order and we do make 1:7 twist 257

 

[SHWILL]

Barrels ordered. Thanks

 

[mjspeers]

I’ve ordered 5 prefit C6 barrels. All have been great and love that they’re fully customizable.

 

[FuhQ]

Every barrel is made to order and we do make 1:7 twist 257

Sweet, I think I might order a 20” Bull prefit Solus barrel in .25 Creedmoor Improved 40°. But I still have to order a Solus action…

 

[CarbonSix]

If you would make shorter than 16" barrels Id definitely order one. Like a 12" .375 blank

We can do that. There is an option for custom lengths.

 

[CarbonSix]

I’ve ordered 5 prefit C6 barrels. All have been great and love that they’re fully customizable.

We love the continued support! Thank you!

 

[mjspeers]

We can do that. There is an option for custom lengths.

Can you guys do .375 and/or .358 bore barrels?

 

[CarbonSix]

Can you guys do .375 and/or .358 bore barrels?

yes we can,
358 cal: 1:10, 1:12, 1:14, and 1:16 twists
375 cal: 1:9, 1:10, 1:12, 1:16, 1:18, and 1:20

 

[mjspeers]

Welp, going to be needing another barrel. I’ll be giving you a call this week.

 

[CarbonSix]

Welp, going to be needing another barrel. I’ll be giving you a call this week.

You know the hours lol.

 

[Rex_Allen]

What’s the lead time?

 

[CarbonSix]

What’s the lead time?

The goal is about 3 months, though no absolute promises. This is our biggest sale of the entire year, so definitely take advantage of it if you're on the fence about ordering one. If you have any questions about customizing your barrel email us at [email protected] or phone call at 844-883-9493 and we will be happy to help. We are in the office M-F 8-5 CST.

 

[Elnicko]

Do you happen to have a 338SS reamer?

 

[CarbonSix]

Do you happen to have a 338SS reamer?

We do not. There is an option to have us rent a reamer for your order with the chambering option as you build your barrel. You can also supply your own reamer.

 

[mjspeers]

Can’t pass up an opportunity to show off. 300wm chambered by C6 with a Rhian Mantha reamer. Absolute hammer with 215s.

 

[CarbonSix]

Can’t pass up an opportunity to show off. 300wm chambered by C6 with a Rhian Mantha reamer. Absolute hammer with 215s. View attachment 8166835

Outstanding! Thank you for the share!

 

[FuhQ]

The goal is about 3 months, though no absolute promises. This is our biggest sale of the entire year, so definitely take advantage of it if you're on the fence about ordering one. If you have any questions about customizing your barrel email us at [email protected] or phone call at 844-883-9493 and we will be happy to help. We are in the office M-F 8-5 CST.

Can yall do a .25 Creedmoor Improved 40º? I need a 20" Bull 1:7 twist chambered for that, headspaced for an Aero Solus action. Are the Solos actions all cut to the same headspace for a true torque-on prefit, or do they use a nut? I haven't ordered the action yet, still deciding on going Solus, or picking up something different.

 

[CarbonSix]

You would have to provide a reamer. We do not have any 257 caliber reamers as it is extremely rare that we even get a request for that caliber. The Solus is a shouldered barrel, it uses a Zermatt Origin barrel.

 

[Dimefox]

Not trying to shit on a site sponsor, but after reading through this thread and recent issues with C6 barrels, I'd be weary of ordering one. YMMV.

Carbon 6 Tikka pre-fit

Finished up the 7PRC today and went to shoot, factory ammo is super tight, like the shoulder needs to be bumped back more, any one else having this issue ? I will contact Carbon six Monday, I’m just checking to see if this is a isolated issue Thanks

rokslide.com

 

[CarbonSix]

Not trying to shit on a site sponsor, but after reading through this thread and recent issues with C6 barrels, I'd be weary of ordering one. YMMV.

Carbon 6 Tikka pre-fit

Finished up the 7PRC today and went to shoot, factory ammo is super tight, like the shoulder needs to be bumped back more, any one else having this issue ? I will contact Carbon six Monday, I’m just checking to see if this is a isolated issue Thanks

rokslide.com

There were a handful of QC issues that slipped through earlier in the year while dealing with personnel issues that have been taken care of. We have a new production manager and all new QC processes have been put in place. For example, all pre-fit barrels will now have a headspace spec sheet shipping with the barrel to show the exact specs of that barrel. The bottom line is we stand behind our product 100% and will work with a customer even if an issue isn't on our end.

 

[zeroz]

Absolutely trying to shit on a site sponsor

FIFY

 

[zeroz]

That wasn't an attack on you guys. I have one of your barrels showing up tomorrow actually. I was fixing his contradicting post for him. Im looking forward to getting yours installed and broken in.

 

[CarbonSix]

That wasn't an attack on you guys. I have one of your barrels showing up tomorrow actually. I was fixing his contradicting post for him. Im looking forward to getting yours installed and broken in.

All good! we understood your post just reassuring the people in the back of the class. Excited to hear some feedback on your new barrel! Definitely send us some shot groups!

 

[Easy_E]

Fresh 350 Legend ready for deer season the Carbon6 barrels shoot well !

 

[CarbonSix]

Fresh 350 Legend ready for deer season the Carbon6 barrels shoot well !

Beautiful gun! Thank you for sharing!

 

[eMc9002]

Any chance you guys do 8.6 Blackout barrels in 12"?

 

[CarbonSix]

At this time we do not. We will be moving toward ECM rifled barrels by this time next year and the 8.6 1:3 twist is something we will likely offer at that time.

 

[eMc9002]

At this time we do not. We will be moving toward ECM rifled barrels by this time next year and the 8.6 1:3 twist is something we will likely offer at that time.

10-4, thanks for the reply.

 

[tobylazur]

What kind of weight would I be looking at for a 22” Sendero contour .30cal barrel?

 

[FuhQ]

You would have to provide a reamer. We do not have any 257 caliber reamers as it is extremely rare that we even get a request for that caliber. The Solus is a shouldered barrel, it uses a Zermatt Origin barrel.

So, would I still have to pay the $75, even though I'd need to buy and provide a reamer for said barrel?

 

[CarbonSix]

So, would I still have to pay the $75, even though I'd need to buy and provide a reamer for said barrel?

Reach out to Gene at [email protected]

 

[CarbonSix]

Do you do .375 barrels in any faster twists? Like a 1:8 or 1:6"?

Not at this time

 

[CarbonSix]

As a reminder for our BIG summer sale, if you have any questions about customizing your barrel, email us at [email protected] or phone 844-883-9493, and we will be happy to help answer any questions you may have. We are in the office M-F 8-5 CST.

 

[CarbonSix]

Check out this beauty taken 624 yards with one of our Pre-Fit Tikka 300 Win Mag barrels. Lightweight and 0.5 MOA guaranteed!

 

[Brasscow]

Would be awesome if you guys did blaser barrels?

 

[CarbonSix]

Would be awesome if you guys did blaser barrels?

Email [email protected]

 

[Raffy]

What kind of reamer do you have for 6.5PRC? Do you have the 6.5PRC AW2 reamers? I'm thinking of ordering a new barrel for mine, but am concerned about getting clickers from the saami reamers

 

[CarbonSix]

What kind of reamer do you have for 6.5PRC? Do you have the 6.5PRC AW2 reamers? I'm thinking of ordering a new barrel for mine, but am concerned about getting clickers from the saami reamers

email [email protected] or call 844-883-9493

 

[Raffy]

Email sent. Gene are all of your contours straight walled from shank to muzzle or are they profiled differently?

 

[CarbonSix]

Email sent. Gene are all of your contours straight walled from shank to muzzle or are they profiled differently?View attachment 8172978

email [email protected] or call 844-883-9493

 

[CarbonSix]

Here is a tricked-out .223 build, one our supporters have been getting a lot of attention on! YouTube Video link in this thread!



This is also our last month to take advantage of our 15% Sale on all barrels! Code: sniper15

 

[CarbonSix]

LAST WEEK for 15% OFF SALE! Code: SNIPER15

 

[notacos4u]

LAST WEEK for 15% OFF SALE! Code: SNIPER15

What’s your current lead time and I see you have listed ARC Coup De Grace, you are doing them now? Just want to make sure, thanks

 

[CarbonSix]

What’s your current lead time and I see you have listed ARC Coup De Grace, you are doing them now? Just want to make sure, thanks

email [email protected] or call 844-883-9493, speak with Gene

 

[FuhQ]

@CarbonSix Any new 15% off codes for Hide members? My Solus action just came in yesterday, so I was going to order my custom 20" 1:7 twist .25 Creedmoor barrel tonight, but the code expired...

 

[Ernest 5.56]

What are all the specifics of the accuracy guarantee how many shots ammo etc?

 

[CarbonSix]

@CarbonSix Any new 15% off codes for Hide members? My Solus action just came in yesterday, so I was going to order my custom 20" 1:7 twist .25 Creedmoor barrel tonight, but the code expired...

We will be getting an official forum member code posted. It will have its own post.

 

[CarbonSix]

What are all the specifics of the accuracy guarantee how many shots ammo etc?

.5 minute minimum with proper load development and installation. Standard is 3-shot but the way we wrap our barrels and the steel core contour, our barrels have minimal to no POI shift even after 10-shots.