Gunsmithing CDI Precision Savage DBM feeler...

#151
Re: CDI Precision Savage DBM feeler...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CDiPrecision</div><div class="ubbcode-body">Yes, it was already inletted. I bought a factory Savage McMillan A5 equipped rifle.

My DBM uses the factory inlet for the newer center feed Savage DBM units. just needs a little trimming with a dremel.. easy install if you have an existing DBM rifle from savage. </div></div>

Can you inlet the B&C stocks?
 
#155
Re: CDI Precision Savage DBM feeler...

You can order whenever you want. I will have parts in stock from here on out. Just call me
smile.gif
941-961-3185 thanks

jeff
 
#166
Re: CDI Precision Savage DBM feeler...

[url="http://i900.photobucket.com/albums/ac201/1troubleshooter/DSCN0122.jpg"]http://i900.photobucket.com/albums/ac201/1troubleshooter/DSCN0122.jpg[/url][/IMG
[IMG]http:/
/i900.photobucket.com/albums/ac201/1troubleshooter/DSCN0124.jpg[/IMG
[IMG]
[url="http://i900.photobucket.com/albums/ac201/1troubleshooter/DSCN0126-1.jpg"]http://i900.photobucket.com/albums/ac201/1troubleshooter/DSCN0126-1.jpg[/url][/IMG

[img]http://i900.photobucket.com/albums/ac201/1troubleshooter/DSCN0119.jpg
im sure these are huge but here you go.
 
#170
Re: CDI Precision Savage DBM feeler...

Great pics everyone, I'm glad we could get this together and hope everybody enjoys their new DBM systems!!! Hope to have some pics up soon of my 223 Ackley build as soon as we get some AI 223 mags in.

Gregg
 
#171
Re: CDI Precision Savage DBM feeler...

Gregg, you don't have any mags on order, your barrel is not near you and you look funny. So, my question is where are you going with this since you have come over to the dark side with the x2 AI setups????? Face it, you are growing up.......lol
 
#173
Re: CDI Precision Savage DBM feeler...

DSC_4433.jpg

(Stagger feed / McM A3)

Thanks Jeff! I love it!

(Don't make fun of my ring location... trying to find a base that gives me some more ring mount space towards the rear thanks to the IOR).
 
#177
Re: CDI Precision Savage DBM feeler...

Got my McMillan M40A1/HTG stock & bottom metal today from Jeff! Excellent work, fits the stock like a glove, just had to trim the front action screw down a little. This is for my little 20" barreled 223 Ackley predator/varmint rifle...can't wait for the 223 Accuracy International mags to get here now (couple more weeks hopefully)! Will post pics when my barrel gets back from SAS, it's being threaded & muzzlebraked so I can run my can on it as well.

Thanks a million Jeff, glad we could get together on this & finally get some great DBM systems available for the Savage platform. And thanks to everybody who got in on this at the beginning, it couldn't have happened without you guys!!!!

Gregg
 
#181
Re: CDI Precision Savage DBM feeler...

I mailed off the stock today, I am itching to get another for my 223. I guess I will wait for a couple of weeks. Is this(Detachable mag sys) going to be in your product line up from now on?

LongArm
 
#183
Re: CDI Precision Savage DBM feeler...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LongArm</div><div class="ubbcode-body">I mailed off the stock today, I am itching to get another for my 223. I guess I will wait for a couple of weeks. Is this(Detachable mag sys) going to be in your product line up from now on?

LongArm </div></div>

I asked Jeff the same question.He said yes! Great news eh?
 
#186
Re: CDI Precision Savage DBM feeler...

FYI: Updated the review I posted earlier in the thread. Made it to the range today, and the new DBM setup functioned flawlessly over ~70 rounds. Two huge thumbs up.
 
#188
Re: CDI Precision Savage DBM feeler...

I got my B&C Medalist finished up last night. I decided to do the inletting myself due to impatience. It was harder than I expected. Not to bad but hard without a mill. I had to do a few tweaks to the kit probably due to my install. I trimmed the two horns off the front top of the AI mag, about .040, just to help feeding. The other mod was slightly changing the profile of the feed lips. I bent the front inch of the feedlips up just a bit, so when the bolt pushed the cartridge was allowed to tilt up a bit.

Needless to say its a great package at a great price. I'll try and snap some pics tonight. Thanks again Jeff, mprtech.
 
#197
Re: CDI Precision Savage DBM feeler...

What's the story with AW mags? Does your bottom metal accept both AICS & AW mags or is there a mod required? Do you have any AW mags in stock?
 
#198
Re: CDI Precision Savage DBM feeler...

The AW mod is just something I'm experimenting with. I have an old raggedy one here and it works, but the last round is iffy. I need a new one to experiment with(ordered one last week). I would like it to work without screwing with it to tune it and make it work(thats what Ill be working on).
 
#200
Re: CDI Precision Savage DBM feeler...

Just got my rifle back. My friend did a beautiful job inletting. He says the diagrams and instructions are perfect. The mag feeds great, smooth as butter!! Looks fantastic!!! Can't wait to shoot her this weekend.

Pete
 
You must log in or register to reply here.

Similar threads

J
Accessories M5 BM Grayboe Hawkins pure precision LA SA
Replies
11
Views
541
Jared235
J
J
CDI Precision Bottom Metal and AW Magazine Compatability.
Replies
7
Views
579
Terry Cross
Terry Cross
C
Firearms American Precision Arms RTG LA Bottom metal, AICS Accurate Mag 300WM 3 rnd
Replies
9
Views
459
chrishf12
C
chpprguy
SOLD McMillan carbon game warden R700 LA
Replies
8
Views
1K
chpprguy
chpprguy
nightvisiondude721
Savage Model 12 223Rem modernization
Replies
6
Views
724
D̷e̷v̷i̷l̷D̷o̷c̷A̷Z̷
D
Top Bottom
Back
Home
Forums
Merch
Alerts