Chassis help for……Savage

[DrDeath]

Ok Ok!!! I’m ready for all the savage bashing but was hoping for the experts here to answer a question.
Is there a chassis out there that will fit the Savage model 12 Long Range Precision Varmint rifle? This is for a 223. This is the single shot Right hand bolt, Left hand port one inch bull barrel beast.
I’m not worried about there being a magwell not being used on the chassis but I thought these had a different stock screw spacing. Anyone???

 

[Zebulon]

Ok Ok!!! I’m ready for all the savage bashing but was hoping for the experts here to answer a question.
Is there a chassis out there that will fit the Savage model 12 Long Range Precision Varmint rifle? This is for a 223. This is the single shot Right hand bolt, Left hand port one inch bull barrel beast.
I’m not worried about there being a magwell not being used on the chassis but I thought these had a different stock screw spacing. Anyone???

Pretty sure MDT? Makes one?

 

[DrDeath]

Think so? Because I thought the hole spacing was different on the Savage LRPV

 

[spife7980]

Think so? Because I thought the hole spacing was different on the Savage LRPV

Well what does your bolt spacing measure?

 

[DrDeath]

I have not purchased it yet. It’s sitting at a shop. Was thinking of a cheap project.

 

[gopherslayer]

It’s been a while but I thought the 3 screw had similar spacing for 2 of the screws and the third was added for more stability so they should work in a chassis/stock just minus the third screw being used. I could be wrong though. I had one briefly with a 7 twist on it and it shot bugholes with cheap Walmart 55gr federal fmj.

 

[Zebulon]

I’d call and ask MDT etc

 

[memilanuk]

Rather than re-type everything, I'm just going to drop these two links:

Savage Shooters - Savage Action Lengths

actions magazine action short generation screw spacing savage long series

www.savageshooters.com

Does my Savage fit?

If you own a Savage model 10, 11, 12, 14, 16 or a newer 110 short action rifles all our Savage SA chassis options for the Savage SA will fit. There is hardware in the package to accommodate your 4.27"

support.mdttac.com

...which are literally the first two results for a simple Google search for "Savage action hole spacing".

 

[Halfnutz]

XLR may also be an option for you.

 

[anon]

Some time back, I bought a LRPV stock to try with my factory F/TR, that was a 3.44 bolt space stock. The LRPV action is also, I believe, using the large shank.

I was disappointed when the other action manufacturers that chose to use a Savage thread settled on the small shank. That made my store of large shank barrels, er, Savage action only, damnit!

 

[longrange772]

I think Boyds makes a stock for that model. https://www.boydsgunstocks.com/ Adjustable stock and reasonably priced. Check out the At-one.